Logitech Ultrathin Keyboard Cover User manual

Getting started with
Logitech®Ultrathin Keyboard Cover

Logitech Ultrathin Keyboard Cover
2
Contents
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
繁體中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
한국어 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
www.logitech.com/support . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Logitech Ultrathin Keyboard Cover
English 3
Know your product
1. Protective cover
2. iPad holder
3. Keyboard
4. Function keys
5. Status light
6. On/O switch
7. Bluetooth connect button
8. Documentation
9. Micro-USB charging cable
10. Cleaning cloth
Getting started with
Logitech®Ultrathin Keyboard Cover
4
8
5
1
2
9 10
6
7
3

Logitech Ultrathin Keyboard Cover
4English
Set up your product
1. Turn on the Keyboard Cover:
• Bluetooth discovery starts
automatically and continues for 15
minutes. The Status light blinks blue.
• If the Status light briefly turns red,
charge the batteries. For more
information, see “Charge the
batteries.”
2. Make sure your iPad’s Bluetooth feature
is on. Select Settings > Bluetooth > On.
3. Select “Logitech Ultrathin KB cover” on
the iPad’s Devices menu.
4. If your iPad requests a PIN, enter the
code using the Keyboard Cover and
not your iPad’s virtual keyboard. After
the Bluetooth connection is made, the
Status light briefly turns blue, and then
it turns o.
5. Place the iPad on the Keyboard Cover.

Logitech Ultrathin Keyboard Cover
English 5
Charge the batteries
1. Plug the Micro-USB Charging cable into
the Keyboard Cover and a USB port on a
computer. The Status light blinks green.
2. Charge the batteries until the Status
light turns solid green.
Battery information:
• A fully charged battery provides about
6 months of power when the Keyboard
Cover is used about two hours a day.
• Charge the batteries when the Status
light briefly turns red after the Keyboard
Cover turns on.
• When not in use, turn o the Keyboard
Cover to conserve battery power.
• The Keyboard Cover enters sleep mode
if powered on and not used. Press any
key to wake.
USB

Logitech Ultrathin Keyboard Cover
6English
Visit Product Central
There’s more information and support
online for your product. Take a moment to
visit Product Central to learn more about
your new Keyboard Cover.
Browse online articles for setup help,
usage tips, or information about
additional features.
Connect with other users in our Community
Forums to get advice, ask questions, and
share solutions.
At Product Central, you’ll find a wide
selection of content:
• Tutorials
• Troubleshooting
• Support community
• Software downloads
• Online documentation
• Warranty information
• Spare parts (when available)
Go to www.logitech.com/support/
ultrathinkeyboardcover

Logitech Ultrathin Keyboard Cover
English 7
Use your product
Product features
1. Home Displays the iPad Home screen.
Function keys To use, press and hold the
Fn key, and then press a key listed below.
2. Fn + 1 = Search Launches the iPad
search function.
3. Fn + 2 = Switch language Switches
the keyboard language.
4. Fn + 3 = Virtual keyboard Shows/
hides the virtual keyboard.
5. Fn + 4 = Select left Selects text on
the left, word by word.
6. Fn + 5 = Select right Selects text on
the right, word by word.
7. Fn + 6 = Cut
8. Fn + 7 = Copy
9. Fn + 8 = Paste
10. Fn + 9 = Play/Pause
11. Fn + 0 = Mute
12. Fn + dash = Volume down
13. Fn + plus = Volume up
14. Fn + delete = Lock screen Locks or
unlocks the iPad screen.
Status light indications
Light Description
Blinking green The battery is charging.
Green The battery is charged (more than 5%).
Red Battery power is low (less than 5%). Charge the batteries.
Blinking blue Fast: Keyboard Case is in discovery mode.
Slow: Keyboard Case is trying to reconnect to your Apple device.
Solid blue Bluetooth pairing is successful.
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Logitech Ultrathin Keyboard Cover
8English
Storing the iPad for travel
1. Lift the iPad from the Keyboard Cover.
2. Rotate the iPad, with the screen side
down, so the Home button is on
the right.
3. Place the iPad on to the Keyboard
Cover. A magnetic clip holds the iPad
in position.
Connecting to a dierent iPad
1. Make sure the Keyboard Cover is
turned on.
2. Check that your iPad’s Bluetooth feature
is on. Select Settings > Bluetooth > On.
3. Press the Bluetooth Connect Button.
The Keyboard Cover is discoverable for
3 min.
4. Select “Logitech Ultrathin KB cover”
on the iPad’s Devices menu.
5. If your iPad requests a PIN, enter the
code using the Keyboard Cover and
not your iPad’s virtual keyboard. After
the Bluetooth connection is made, the
Status light briefly turns blue, and then
it turns o.
6. Place the new iPad on the Keyboard
Cover.

Logitech Ultrathin Keyboard Cover
English 9
Troubleshooting
The Keyboard Cover does not work
• Press any key to wake the Keyboard
Cover from sleep mode.
• Turn the Keyboard Cover O and than
back On.
• Recharge the internal batteries. For
more information, refer to “Charge the
batteries.”
• Re-establish the Bluetooth connection
between the Keyboard Cover and iPad:
• Verify that iPad’s Bluetooth feature is
turned on.
• Choose “Logitech Ultrathin KB cover”
from the Devices menu on your iPad.
The Status light briefly turns blue after
the Bluetooth connection is made.

Logitech Ultrathin Keyboard Cover
10 English
Battery disposal at product end of life
1. Pry o top cover of keyboard with
screwdriver.
2. Detach battery from circuit board and
remove battery.
3. Dispose of your product and its battery
according to local laws.
1 2 3

Logitech Ultrathin Keyboard Cover
繁體中文 11
認識產品
1. 保護蓋
2. iPad 固定插槽
3. 鍵盤
4. 功能鍵
5. 狀態指示燈
6. 開啟/關閉開關
7. 藍牙連線按鈕
8. 說明文件
9. 微型 USB 充電連接線
10. 清潔布
Getting started with
Logitech®Ultrathin Keyboard Cover
4
8
5
1
2
9 10
6
7
3

Logitech Ultrathin Keyboard Cover
12 繁體中文
設定產品
1. 開啟鍵盤保護殼電源：
• 藍牙探索功能會自動啟動並持續 15 分
鐘。狀態指示燈閃爍藍燈。
• 如果狀態指示燈短暫亮起紅燈，請為
電池充電。如需詳細資訊，請參閱「
電池充電」。
2. 確定 iPad 的藍牙功能已開啟。選取「設
定」>「藍牙」>「開啟」。
3. 選取 iPad「裝置」功能表中的「羅技超
薄鍵盤保護殼」。
4. 如果您的 iPad 要求 PIN 碼，請使用鍵盤
保護殼輸入代碼，不要使用 iPad 的虛擬
鍵盤。建立藍牙連線後，狀態指示燈會
短暫亮起藍燈後熄滅。
5. 將iPad 放置在鍵盤保護殼上。

Logitech Ultrathin Keyboard Cover
繁體中文 13
電池充電
1. 將微型 USB 充電連接線插入到鍵盤保護
殼與電腦上的 USB 連接埠。狀態指示燈
閃爍綠燈。
2. 為電池充電直到狀態指示燈恆亮綠燈。
電池資訊：
• 充飽的電池在每天使用兩小時鍵盤保護
殼的情況下，電力可持續使用約 6 個月。
• 當開啟鍵盤保護殼電源狀態指示燈短暫
亮起紅燈時，請為電池充電。
• 當不使用鍵盤保護殼時，請關閉電源以
節省電池電力。
• 鍵盤保護殼電源開啟後若未使用，會進
入睡眠模式。按下任意鍵即可喚醒。
USB

Logitech Ultrathin Keyboard Cover
14 繁體中文
造訪產品中心
您的產品還有更多產品相關資訊與支援。
請抽空造訪「產品中心」，深入瞭解您的新
鍵盤保護殼。
請瀏覽線上文章，瞭解設定說明、使用秘
訣，或是其他功能的相關資訊。
您還可以和「社群論壇」中的其他使用者
保持聯繫以獲得建議、提出問題，以及分
享解決方案。
「產品中心」提供各式各樣的精采內容：
• 教學課程
• 疑難排解
• 支援社群
• 軟體下載
• 線上文件
• 保固資訊
• 備用零件 (如有提供時)
請瀏覽 www.logitech.com/support/
ultrathinkeyboardcover

Logitech Ultrathin Keyboard Cover
繁體中文 15
使用產品
產品功能
1. 首頁 顯示 iPad 首頁畫面。
功能鍵 若要使用，請按住 Fn 鍵，然後按
下下列任一按鍵。
2. Fn + 1 = 搜尋 啟動 iPad 搜尋功能。
3. Fn + 2 = 切換語言 切換鍵盤語言。
4. Fn + 3 = 虛擬鍵盤 顯示/隱藏虛擬
鍵盤。
5. Fn + 4 = 選取左側 逐字選取左側的
文字。
6. Fn + 5 = 選取右側 逐字選取右側的
文字。
7. Fn + 6 = 剪下
8. Fn + 7 = 複製
9. Fn + 8 = 貼上
10. Fn + 9 = 播放/暫停
11. Fn + 0 = 靜音
12. Fn + 破折號 = 音量減小
13. Fn + 加號 = 音量增大
14. Fn + delete = 鎖定螢幕 鎖定或解除鎖
定iPad 螢幕。
狀態指示燈
燈號 說明
閃爍綠燈 電池正在充電中。
綠燈 電池已充電 (高於 5%)。
紅燈 電池電力不足 (低於 5%)。請為電池充電。
閃爍藍燈 快速：鍵盤保護殼處於探索模式。
慢速：鍵盤保護殼正嘗試重新連接 Apple 裝置。
藍色恆亮 藍牙配對成功。
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Logitech Ultrathin Keyboard Cover
16 繁體中文
存放 iPad 以便外出時攜帶
1. 將iPad 從鍵盤保護殼上拿起。
2. 旋轉 iPad 使其螢幕朝下且「首頁」按鈕
位於右方。
3. 將iPad 放置在鍵盤保護殼上。磁力夾扣
會將 iPad 固定在定位上。
連接另一台 iPad
1. 確定鍵盤保護殼電源已開啟。
2. 檢查 iPad 的藍牙功能是否已開啟。選取
「設定」>「藍牙」>「開啟」。
3. 按下「藍牙連線」按鈕。鍵盤保護殼會
處於可偵測狀態 3 分鐘。
4. 選取 iPad「裝置」功能表中的「羅技超薄
鍵盤保護殼」。
5. 如果您的 iPad 要求 PIN 碼，請使用鍵盤
保護殼輸入代碼，不要使用 iPad 的虛擬
鍵盤。建立藍牙連線後，狀態指示燈會
短暫亮起藍燈後熄滅。
6. 將新的 iPad 放置在鍵盤保護殼上。

Logitech Ultrathin Keyboard Cover
繁體中文 17
疑難排解
鍵盤保護殼無法正常運作
• 按任意鍵將鍵盤保護殼從睡眠模式
喚醒。
• 關閉再開啟鍵盤保護殼電源。
• 為內部電池充電。如需詳細資訊，請參
閱「電池充電」。
• 重新建立鍵盤保護殼與 iPad 之間的藍牙
連線：
• 確認 iPad 的藍牙功能已開啟。
• 選擇 iPad「裝置」功能表中的「羅技超
薄鍵盤保護殼」。建立藍牙連線後，狀
態指示燈會短暫亮起藍燈。

Logitech Ultrathin Keyboard Cover
18 繁體中文
產品使用壽命告終時的電池棄置指南
1. 使用螺絲起子撬開鍵盤上蓋。
2. 從電路板上取下電池。
3. 依照當地法令棄置產品及電池。
1 2 3

Logitech Ultrathin Keyboard Cover
한국어 19
제품 설명
1. 보호 커버
2. iPad 홀더
3. 키보드
4. 기능 키
5. 상태 표시등
6. 켜기/끄기 스위치
7. Bluetooth 연결 버튼
8. 설명서
9. 마이크로 USB 충전 케이블
10. 청소용 천
Getting started with
Logitech®Ultrathin Keyboard Cover
4
8
5
1
2
9 10
6
7
3

Logitech Ultrathin Keyboard Cover
20 한국어
제품 설정
1. 키보드 커버를 켭니다.
• Bluetooth 검색이 자동으로 시작되어
15분간 계속됩니다. 상태 표시등이 파
란색으로 깜빡입니다.
• 상태 표시등이 빨간색으로 잠시 켜지
면배터리를 충전합니다. 자세한 내용
은“배터리 충전”을참조하십시오.
2. iPad의Bluetooth 기능이 켜져 있어야 합
니다. 설정 > Bluetooth > 켬을 선택합니다.
3. iPad의장치 메뉴에서 “로지텍 울트라씬
KB 커버”를선택합니다.
4. iPad에PIN을입력하라는 메시지가 나타나
면iPad의가상 키보드를 사용하지 말고
키보드 커버를 사용하여 코드를 입력합
니다. Bluetooth가연결되면 상태 표시등
이파란색으로 잠시 켜졌다가 꺼집니다.
5. iPad를키보드 커버에 장착합니다.