Warning !
Operation
1.Download Install Sofware(optional, logger is already preconfigured)&
Please download and install the free logtrec.® sofware (Windows) via https://www.logtrec.com
2.Configure Parameters
3.Start Logging
For first time use or after battery replacement: connect the data logger to the computer via USB Port, Configure
via logtrec.® software.
To avoid time or time zone errors, please make sure you Save Parameter before usage to configure your local
time & parameters into the logger via logtrec.® Software.
Press Button:
Press and hold the left button(Start button) for 5 seconds until the icon is shown on the LCD & Green LED
falsh 5 times, indicating the logger starts logging.
Note: If the icon DELAY is litten, it means the logger configured with start delay; it will start logging after the set
delay time elapses.
4. Stop Logging
Press Button: Press and hold the right button (STOP button) for 5 seconds until the icon is shown on the LCD,
indicating the logger stops logging.
Note: This logger could not be stopped by pressing button before at least two readings after recording begins.
5.Download Data
Connect the data logger to your computer via USB Port, wait until logtrec.® Evo storage disk is shown on your
4
