Look GEO TREKKING ROC VISION User manual

OUICK
START
lookcycle.com

1
RECHARGE BEFORE
FIRST USE
Charging time = 50min • Chose the side where you want to mount the lighting device
• Insert the metal tool included in the box into pinhole above
the side cover [A]
• Gently press on the metal tool then remove the side cover [B]
• Remove the reflector [C]
• Insert the lighting device in the correct direction
/ insert the side cover “click”
• LONG PRESS (1s) > turn light on and off
• SHORT PRESS > Cycle through the modes
• MODE 1 > steady (5h)
• MODE 2 > flash (10h)
• MODE 3 > flash eco (30h)
• Insert the metal tool included in the box [A] in the small
pedal pinhole above the side cover
• Apply a small amount of pressure to release the side cover
• Remove the side cover and pull the light out [B]
MOUNTING
USE DISASSEMBLY
charging
charge completed
A
A
B C
B