Lorex SG6228 User manual

It’s all on the web
Quick Set-u
p
Guide
Image Sensor 1/3” CMOS Color NTSC
Resolution 240 TV Lines
Lens 3.6 mm F 2.0
Min. Illumination 3 LUX (without IR LED)
Transmitting Freq. 2.411 GHz ~ 2.473 GHz (4 Ch)
Power Source 9 V DC 300 mA Adaptor
Dimensions 2.5”w x 3.5”h x 1.5”d
5. Operate the Camera
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
www.lorexcctv.com
VISIT
Strategic Vista International Inc.
Copyright © 2005 Strategic Vista International Inc
As our products are subject to continuous improvement, SVII and its
subsidiaries reserve the right to modify product design, specifications
and prices, without notice and without incurring any obligation. E&OE
ACCESSORY 2.4 GHz 4 CHANNEL
COLOR WEATHER RESISTANT*
CAMERA
BUSINESS & HOME
Use the channel selector switch to set the accessory
wireless camera to a different channel than the other
wireless cameras that are already connected.
Holding this button for 3 seconds turns the camera
ON/OFF. An LED light will be illuminated when the
camera is set to “ON”.
Please refer to the Owner’s Manual of your original system
for instructions on setting the Dwell Time and Auto Scanning
Camera Specifications
For optimum reception, you may need to try changing
to alternate channels on both the receiver and camera, between
1-4.
* IP44 rated for Indoor and Outdoor use. Not recommended for direct
exposure to water, rain or snow.
light shows the
current channel
repeatedly press
to choose channel
Model SG6228
Congratulations! You have successfully
expanded your Wireless Security System.

Features:
•Weather Resistant camera for Indoor/ Outdoor use*
•4 Channel selectable camera
•New Ultra Slim design
•Automatic IR illumination provides B&W video
images in low light conditions**
•Listen-in audio
•300 ft. wireless transmission (open space)†
Standard AC Adapter
1. Microphone
–
Buil
t
-in condenser microphone
provides listen-in audio capability from camera to
monitor
2. Lens – Color CMOS Image Sensor
3. 6 Infrared LED’s – Enhances the picture quality in low
light conditions
4. Channel Selector/Power Button – Selects channels 1
to 4. Hold for 3 seconds to turn the power ON/OFF.
5. Bracket – Plastic bracket connects to camera for
mounting to walls, ceilings or table
6. DC IN Jack – Connects to the 9V DC (500mA)
adapter.
7. Sunshade Visor – Protects camera from the elements
and blocks from the camera from the direct glare of the
sun.
8. LED Channel Indicator – Shows the channel (1-4)
that the camera is set to.
c) Connect the supplied 9V DC adapter to the DC
IN jack at the rear of the camera.
d) Plug the 9V DC adapter to the power outlet.
e) To turn the camera power ON/OFF, hold the
Channel button for 3 seconds.
(by default the camera is ON)
Mounting Screws
Bonus clip-on camera stand
a) Install the camera to the supplied bracket (wall
mount or clip-on). Refer to options below:
b) For option #1 attach the bracket to the wall or
ceiling where you want to install the camera.
For option #2 connect the clip-on stand onto
any object.
Wall
Wall mount
bracket
1. Confirm Package Contents 2. Install the Camera 4. Camera Controls & Functions
FRONT/SIDE VIEW
The mounting bracket (option #1) is designed to
permanently mount the camera (i.e. to wall or ceiling)
SG6228 camera with sunshade visor
and mounting bracket
* IP44 rated for Indoor and Outdoor use. Not recommended for direct exposure to water,
rain or snow.
** IR illumination range of 6 ft. under ideal conditions. Objects at or beyond this range may
be partially or completely obscured, depending on the camera application.
† Maximum open space transmission range. Actual range dependent upon building
materials and other obstruction in path of wireless signal.
To power outlet
DC IN jack
2
3
4
5
6
1
7
8
Cli
p
-on
Option #1 Option #2
3. Connect the Power