LSA Statement User manual
fàtàxÅxÇà
I N T E G R A T E D A M P L I F I E R
P R O D U C T M A N U A L
L S A
L S A
fàtàxÅxÇà
I nte g r a t e d A mp l if i e r
Thank you for selecting the LSA fàtàxÅxÇà Integrated Amplifier!
To ensure your most complete satisfaction, please read this
manual and keep it in a safe place for future reference.
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Contents:
Main eatures 1
Safety Instructions 2
Supplied Accessories 3
ront Panel 4
Rear Panel 5
Basic Connection 6
Phono Connection 7
Basic Operation 8
Note from LSA 9
Specifications 10
Warranty 11
0
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Main eatures:
• No compromise, high current, high fidelity design
• 100% Quality Control via multi-point inspection
• Integration of advanced vacuum tube and solid state technologies
• Exhaustive application of Active Tube Load proprietary circuitry
• Powerful twin toroidal transformers
• True dual mono topography for superb stereo separation
• Built-in quality phono stage (Moving Magnet)
• Variable Preamp Output
• Integrated/Power Amp modes via toggle switch
• Safety protection circuit
• Remote control
• ive year warranty
1
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Safety Instructions:
• Place the unit in a cool, clean, dry place and allow generous space for ventilation.
• Avoid direct sunlight, vibration, dust, extreme heat or cold, and chemical solvents.
• Keep unit away from other electrical appliances, motors or transformers.
• Avoid any source of water or moisture, which can cause electrical shock or fires.
• Clean unit with a clean, dry cloth as chemical solvents can damage the finish.
• Avoid extreme temperatures changes, which cause damaging condensation.
• Do not place objects directly on the unit or in any way block ventilation.
• Connect all associated equipment properly before connecting AC power supply.
• Do not force switches, controls or knobs.
• Disconnect the AC power supply during electrical storms or for extended disuse.
• Grasp the power plug when disconnecting AC — never pull by the wire.
• It is dangerous to use any other voltage than that which is specified for this unit.
Such use can cause fire, damage, personal injury and will void the warranty.
• The inside of this unit contains high voltages which can cause injury or death.
Never open the top plate or attempt to fix or modify. Always consult a qualified
technician if there is reason to believe the unit needs repair service
.
2
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
3
Supplied Accessories
Please check for the following items:
• 1 remote control
• 2 batteries for remote control (AAA, UM-4, RO3)
• 2 phono jumper pins
• 1 power cord
• 1 manual
Remote Control
Power Cord
Phono Jumper Pins
Batteries
(AAA,UM-4, RO3)
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
ront Panel
4
Note:
Make all connections before
turning on the power. Engage
STANDBY before turning off
the master switch
NPUT ndicator
STANDBY/ON ndicator
REMOTE Receiver Window
STANDBY/ON
Button
NPUT Select
Button
VOLUME
Knob
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Rear Panel:
1. AC power input
2. POWER ON/OFF
3. L NE OUT
4. AUX1, AUX2, AUX3 NPUTS
5. BALANCED NPUT
A. POWER AMP NPUT (optional)
6. PHONO GROUND
7. PHONO NPUT
8. PHONO OUTPUT
9. SPEAKER OUT (right)
10. SPEAKER OUT (left)
B. NT/EXT PREAMP SW TCH
(optional)*
5
Note:
Make all connections before
turning on the power. Engage
STANDBY before turning off
the master switch
*Toggle switch
to up position
for integrated
amp use. Tog-
gle down to
connect exter-
nal preamp to
power amp
input.
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Connections
6
*Note:
Phono Jumper Pins
(supplied) are needed
to connect a turntable.
*Phono Player
CD, Balanced CD, Single-end
DVD, Analog
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Phono Connection
To use a turntable, plug the two jumper pins (supplied), connecting the
phono output with the nearest pre-amp input. or best sound quality, we
recommend using a set of quality interconnect cables as jumpers. The
phono output can then be plugged into any set of pre-amp inputs.
7
Phono Player
Phono Jumper Pins
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Basic Operation:
1. Power on amplifier (standby indicator LED will turn off for several sec-
onds during warmup).
2. Select Input
3. Adjust volume
* These functions are also available on the remote control
8
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Dear Music Lover,
Thank you for choosing LSA to bring music to life again in your home.
Within this integrated amplifier is a unique technological union of vacuum
tube and solid state circuitries. We are pleased to offer you such warmth,
finesse, control and reliability, traditionally believed to be available only from
the most expensive separate components.
As you enjoy the sound of this fine product, please take care of your ears. It
is rarely necessary to increase the volume knob beyond the ten-o’clock po-
sition, at which point it should produce robust SPL’s from most speakers in
most rooms. Vast power is there if you need it, but please avoid loud
volumes for sustained periods so as to prevent damage to your hearing.
We at LSA want you to enjoy your recorded music for many years to come.
Warmest Regards,
Brian Warford
LSA President
9
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Technical Specifications:
Rated Power (RMS, 8Ω)............................................................................≥150+150W
(RMS, 4Ω)..........................................................................≥300+300W
Total Harmonic Distortion (THD)....≤0.1%(1KHz)
Recommended Loading Impedance....4-8Ω
requency Response.......20HZ-32KHz(±1dB)
S/N Ratio....≥90dB
Channel Separation.....≥60dB(1KHz)
Input Impedance....47KΩ
Input Sensitivity: analog input....≥1.5V
phono input.....≥4mv
Overload Signal Level......≥2V
Input Terminals .......1 balanced input
.....3 analog inputs
....1 phono input
Power Supply .AC220V±10% 50Hz
.....AC110V±10% 60Hz
Dimensions ...430(W) x 235(H) x 480(D) mm
Net Weight ...38kg/78lb
10
L S A
fàtàxÅxÇà
I nt e g r a t e d A mp l if i e r
Warranty Information
The LSA Group warrants this product to be free of manufacturing defects for five (5)
years from the original date of purchase. A valid serial number and an original, dated
bill of sale from an authorized LSA Group dealer is required for warranty coverage.
This balance of this warranty is transferable only if the used product is traded with the
original bill of sale through an authorized LSA Group dealer. Used products traded from
person to person, or through an unauthorized dealer, will not retain warranty coverage.
This warranty is only valid within the United States, its territories, and Canada and does
not apply to products purchased elsewhere. Outside of the United States, its territories,
and Canada, please contact an authorized LSA Group distributor for warranty and
service information.
This warranty is considered void if a defect, malfunction or failure of the product or any
component part was caused by abuse while in the possession of the customer,
tampering by persons other than factory-authorized service personnel, or failure to
comply with the LSA Group’s operating instructions.
Any implied warranties relating to LSA Group products shall be limited to the duration of
this warranty. This warranty does not extend to any incidental or consequential costs or
damages to the purchaser. reight is not covered under warranty. This warranty gives
you specific legal rights. You may also have other rights which vary from state to state.
11
fàtàxÅxÇà
fàtàxÅxÇàfàtàxÅxÇà
fàtàxÅxÇà
I N T E G R A T E D A M P L I F I E R
Nashville, TN · USA · www.thelsagroup.com · info@thelsagroup.com
Table of contents
