LS&S 101102 User manual

Page 1
Interactive Voice Response Alarm Clock
LS&S LLC Item Number: 101102
User Instructions
Note: When the clock is connected to the provided AC Adapter,
will the Voice Trigger mode be active. This will enable you to use
the command, "Hello Moshi" to identify the time, date,
temperature and much more. Be sure after following the
instructions below that the switch labeled:
"Voice Trigger" is in the on position.
When using the clock on battery power, the voice trigger mode is
disabled and the screen must be pressed to activate all voice
interactive commands.
This clock has four different alternating color backgrounds for
speaking, listening and temperature. The night light will alternate
in 6 colors.
The display turns red color when the inside temperature is 90 F
and above, or if a function is not working properly.
The display turns green color when the inside temperature is
between 70 and 89 F, or when the clock is listening.

Page 2
The display turns light blue color when the inside temperature is
between 60 and 69 F.
The display turns dark blue color when the inside temperature is
59 F and below, or when the clock is talking.
Activation List of Spoken Commands
To start using the clock either when using the provided AC
Adapter or while using the batteries, Please begin your interaction
with the clock with the following steps:
1. say “Hello Moshi”, then the clock will will respond with:
“Welcome, command please"
Use any of the following voice commands:
“Time” – The clock will respond “the time is (current time)”.
“Set Time” – The clock will respond “tell me the current time: and,
on first usage or after an error.
Here is an example of how to correctly say the time:
Respond with the current time to set the clock (for example, will
say “six o’clock pm”). The clock will then confirm “the time is now
set to six o’clock pm”.

Page 3
“Alarm” – The clock will respond “the alarm is set to (alarm time)
and say whether the alarm is on or off. Then it will play the
current alarm wake-up sound you have chosen.
“Set Alarm” – The clock will respond “tell me the time you want
the alarm to sound” and on first usage or after an error.
Here is an example of how to correctly say the alarm time:
Respond with the time you want the alarm to sound (for example,
“seven thirty A.M.”). The clock will respond “the alarm is now set
to seven thirty A.M.”
“Alarm Sound” – The clock will respond “to choose an alarm
sound, say ‘alarm one’ (chime), ‘alarm two’ (chirp), or ‘alarm
three’ (bell)."
Respond with your desired sound (for example, “alarm one”). The
clock will respond confirming the chosen alarm sound.
“Turn off the Alarm” – During the silences between alarm sounds,
use the command “turn off the alarm” to silence the alarm. This
command will turn off the alarm until the next day. The alarm will
turn off and the clock will respond “today is (current day, date,
time and temperature).”
“Sleep Sound” – The clock will respond “to choose a sleep sound,
say ‘sound one’ (water), ‘sound two’ (birds), or ‘sound three’

Page 4
(waterfall). Respond with the desired sound (for example, “sound
one”). The clock will respond confirming the chosen sound. The
clock can play 5 minutes of three different soothing sleep sounds.
“Play Sleep Sounds” – The clock will play the current sleep sound
programmed. Press the display to turn off the sleep sound.
“Today’s Date” – The clock will respond “today is (current date).”
“Temperature” – the clock will respond “the temperature is
(current inside temperature).”
“Night Light” – This command turns the alternating colors of the
night light on and off.
“Help” – The clock will respond “you can say (and gives the list of
commands).
After saying the words “Hello Moshi”, if you have decided not to
say a command just say the word “cancel”.
Alarm Sound/Snooze
The alarm begins at a low volume and gradually increases if it is
not turned off. After 1 minute, the alarm will automatically snooze.

Page 5
To turn off the alarm for the day, say “turn off the alarm” in the
silences between the alarm sounds.
If you press the screen when the alarm is sounding, the clock will
respond “snooze time 9 minutes” and will go into snooze mode.
This will occur three times, and then the alarm will stop sounding
for the day.
To turn off snooze mode, say “Hello Moshi”, wait for the clock to
say “Welcome, command please” then say “turn off the alarm”.
Manual Setting
To set the clock manually (time, alarm, date) use the buttons on
the back side of the clock: “Set”, “Mode”, “Up” (increase) and
“Down” (decrease).
The back of the clock has four buttons and two switches. The
layout of the buttons and switches are below.
If looking at the back of the clock, from left to right:
Down arrow Button
Up Arrow Button
Set Button
Mode Button

Page 6
Interactive voice on/off switch
Alarm on/off switch
By default, the Interactive voice and Alarm switches are in the on
position.
Start by pressing the “Set” button, (the clock will say the time)
then press the “Mode” button to get to the desired mode. Then
press the “Up” or “Down” button until you get to your desired time,
alarm or date choice. Please note that the date and choice of “F”
or “C” for temperature must be set manually.
For example, to set the current month, day and year, please do
the following:
Press the “Mode” key until you see the date screen, or the mode
button twice to reach the date screen.
(Please note the default date is Jan 01, 2008.)
Press the “Set” button, the clock will respond “today is Tuesday,
Jan 01, 2008”.
Press the “Up” or “Down” button to change the year. Then press
the “Set” button again.
The first digit for the month will flash. Then press the “Up” or
“Down” button until you arrive at the correct month. The clock will
say the different months as you continue to press “Up” or “Down”.

Page 7
Once you reach the desired month, press the “Set” key. Then the
numbers for the day will flash. Then press the “Up” or “Down”
button until you arrive at the desired day.
Then press the “Set” button two times and the clock will tell you
the date that it is set.
To set the temperature units to F or C (Fahrenheit or Celsius):
Say the “temperature” voice command or press the display until
the temperature is shown. Then use the “Set” button on the back
of the clock to toggle between Fahrenheit (F) and Celsius (C).
On the back side of the clock, there is a manual alarm “On/Off”
switch. Move this switch to the “Off” position if you do not want
the alarm to sound. Otherwise, you can use the voice recognition
commands to manage the alarm. Please make sure that the
Alarm switch is set to the “On” position at all times for the alarm
and alarm voice commands to work.
To activate the clock, simply say “Hello Moshi” or press the
display.
The clock will then say “Welcome, command please.” Please say
the commands in a normal voice, as if you were speaking to a
person nearby. Do not speak at the same time the clock is

Page 8
speaking. Ambient noise may affect the listening operation of the
clock.
Battery Installation
Open the battery cover on the bottom of the clock. Insert 3 “AAA”
batteries according to the polarity sign, or where the flat part of
the batteries are placed against the springs inside the battery
compartment. If batteries were inserted properly, the clock will
begin operation automatically. The clock will display the default
time of “12:00 am”.
When using in only battery mode, if the alarm sound is too quiet
or the display is blurry or no colored lights are visible, please
replace the batteries. Please be sure to reset the correct time,
alarm and date after replacing batteries.
DO NOT mix old and new batteries. DO NOT mix alkaline,
standard (carbon zinc) or rechargeable (nickel cadmium)
batteries.
Non-rechargeable batteries must not be recharged.
The supply terminals must not be short-circuited.
When Using Rechargeable Batteries

Page 9
Rechargeable batteries must be charged under adult supervision.
Rechargeable batteries must be removed from the battery
compartment before being charged.
Thank you for purchasing your new Moshi interactive voice
response alarm clock. If you have any questions, comments, or
concerns please feel free to share your ideas with us.
Please send all e-mails to:
[e-mail]
This product comes with a 1-year limited warranty.
(Please see included warranty card for details)