LSI LSI7102XP-LC User manual

®
DB15-000264-02
2 Gbit/s Fibre Channel
Host Adapters
LSI7102XP-LC, LSI7102LXP-LC
LSI7202XP-LC, LSI7202LXP-LC
LSI7402XP-LC
LSI7202EP-LC, LSI7202EP
LSI7402EP-LC, LSI7402EP
USER’S
GUIDE
August 2005
Version 2.1

ii Copyright © 2002, 2005 by LSI Logic Corporation. All rights reserved.
This document contains proprietary information of LSI Logic Corporation. The
information contained herein is not to be used by or disclosed to third parties
without the express written permission of an officer of LSI Logic Corporation.
LSI Logic products are not intended for use in life-support appliances, devices,
or systems. Use of any LSI Logic product in such applications without written
consent of the appropriate LSI Logic officer is prohibited.
Document DB15-000264-02, August 2005
This document describes Version 2.1 of the LSI Logic family of 2 Gbit/s
Fibre Channel host adapters and will remain the official reference source for all
revisions/releases of this product until rescinded by an update.
LSI Logic Corporation reserves the right to make changes to any products herein
at any time without notice. LSI Logic does not assume any responsibility or
liability arising out of the application or use of any product described herein,
except as expressly agreed to in writing by LSI Logic; nor does the purchase or
use of a product from LSI Logic convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of
LSI Logic or third parties.
Copyright © 2002, 2005 by LSI Logic Corporation. All rights reserved.
TRADEMARK ACKNOWLEDGMENT
LSI Logic, the LSI Logic logo design, Fusion-MPT, IntraServer, and MyStorage
are trademarks or registered trademarks of LSI Logic Corporation. Sun, Sun
Microsystems, and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. SPARC is a registered trademark of SPARC International, Inc.
UNIX is a registered trademark of The Open Group. All other brand and product
names may be trademarks of their respective companies.
DB
To receive product literature, visit us at http://www.lsilogic.com.
For a current list of our distributors, sales offices, and design resource
centers, view our web page located at
http://www.lsilogic.com/contacts/index.html

2 Gbit/s Fibre Channel Host Adapters User’s Guide iii
Copyright © 2002, 2005 by LSI Logic Corporation. All rights reserved.
Preface
This book is the primary reference and user’s guide for the LSI Logic
family of 2 Gbit/s Fibre Channel host adapter boards. It contains a
complete functional description of these boards as well as complete
physical and electrical specifications. LSI Logic uses Class 1 transceivers
on the host adapter boards contained in this user’s guide.
Audience
This document assumes that you have some familiarity with
Fibre Channel protocol and related support devices and will benefit
persons installing and using these boards.
Organization
This document has the following chapters:
•Chapter 1, Installation Procedures, provides both quick and detailed
installation instructions.
•Chapter 2, 2 Gbit/s FC Host Adapter Characteristics, describes the
physical and operational environments of the host adapters.
•Chapter 3, Firmware Installation Procedure, describes the
installation and configuration procedures for the Fusion-MPT™ and
Fibre Channel drivers.
•Chapter 4, BIOS Features, describes the installation procedures for
the Fibre Channel BIOS and Configuration Utility.

iv Preface
Copyright © 2002, 2005 by LSI Logic Corporation. All rights reserved.
Related Publications
LSIFC929X Dual Channel Fibre Channel I/O Processor Technical
Manual, Document No. DB14-000202-01
LSIFC919X Single Channel Fibre Channel I/O Processor Technical
Manual, Document No. DB15-000225-01
Fusion-MPT™ Device Management User’s Guide, Volume 1.2,
Document No. DB15-000186-01
PCI Local Bus Specification, Rev. 2.2
PCI-X/133 Local Bus Specification, Rev. 1.0a
PCI Express Base Specification, Rev. 1.0a
Revision Record
Revision Date Remarks
1.0 10/02 Preliminary release
2.0 04/03 Final release
2.1 08/05 Updated to add the LSI7102LXP-LC, LSI7202LXP-LC, LSI7202EP,
LSI7202EP-LC, LSI7402EP, and LSI7402EP-LC.

2 Gbit/s Fibre Channel Host Adapters User’s Guide v
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Contents
Chapter 1
Installation Procedures
1.1 General Description 1-1
1.2 Quick Installation Procedure 1-2
1.3 Detailed Installation Procedure 1-3
1.3.1 Before You Start 1-3
1.3.2 Installing the Host Adapter 1-3
Chapter 2
2 Gbit/s FC
Host Adapter Characteristics
2.1 General Description 2-1
2.2 Features 2-3
2.2.1 PCI-X Interface 2-3
2.2.2 PCI Express Interface 2-4
2.2.3 FC Interface 2-4
2.3 Physical Environment 2-4
2.3.1 Electrical Characteristics 2-5
2.3.2 Thermal, Atmospheric Characteristics 2-5
2.3.3 Electromagnetic Compliance 2-6
2.3.4 Safety Characteristics 2-6
2.4 Operational Environment 2-6
2.4.1 PCI-X Interface 2-6
2.4.2 PCI Express Interface 2-6
2.4.3 FC Interface 2-7
2.4.4 FC Link Activity/Link Fault LED 2-7
2.5 PCI System ID Values 2-7
2.6 PCI Subsystem ID Values 2-8
2.7 Unique World Wide Name 2-9

vi Contents
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
2.8 Physical Characteristics 2-9
2.8.1 LSI7102XP-LC Host Adapter Configuration 2-9
2.8.2 LSI7102XP-LC Connector and Indicator LED 2-10
2.8.3 LSI7102LXP-LC Host Adapter Configuration 2-12
2.8.4 LSI7102LXP-LC Connector and Indicator LED 2-13
2.8.5 LSI7202XP-LC Host Adapter Configuration 2-14
2.8.6 LSI7202XP-LC Connectors and Indicator LEDs 2-15
2.8.7 LSI7202LXP-LC Host Adapter Configuration 2-16
2.8.8 LSI7202LXP-LC Connectors and Indicator LEDs 2-17
2.8.9 LSI7202EP-LC Host Adapter Configuration 2-18
2.8.10 LSI7202EP-LC Connectors and Indicator LEDs 2-19
2.8.11 LSI7202EP Host Adapter Configuration 2-20
2.8.12 LSI7202EP Connectors and Indicator LEDs 2-21
2.8.13 LSI7402XP-LC Host Adapter Configuration 2-22
2.8.14 LSI7402XP-LC Connectors and Indicator LEDs 2-23
2.8.15 LSI7402EP-LC Host Adapter Configuration 2-24
2.8.16 LSI7402EP-LC Connectors and Indicator LEDs 2-25
2.8.17 LSI7402EP Host Adapter Configuration 2-26
2.8.18 LSI7402EP Connectors and Indicator LEDs 2-27
Chapter 3
Firmware Installation Procedure
3.1 FC Firmware 3-2
3.1.1 Features 3-2
3.1.2 Description 3-2
3.2 Download New FC Firmware 3-3
3.3 Update the FC Firmware 3-4
3.3.1 GUI Update Tool for Windows and Linux Platforms 3-4
3.3.2 Command Line Update Tool for Solaris, Linux, and
Windows 3-4
3.3.3 Command Line Update Tool for DOS 3-7
3.4 Advanced User: Adjusting Default Firmware Settings 3-8
3.4.1 Adjusting Link Speed 3-9
3.4.2 Adjusting Interrupt Coalescing 3-10
3.5 Troubleshooting 3-12

Contents vii
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Chapter 4
BIOS Features 4.1 LSI Logic Boot BIOS 4-2
4.1.1 LSI Logic Boot BIOS Features 4-2
4.1.2 BIOS Overview 4-2
4.1.3 LSI Logic BIOS Boot Specification (BBS) 4-2
4.2 Starting the LSI Logic Boot BIOS Configuration Utility 4-3
4.3 Using the LSI Logic Boot BIOS CU 4-3
4.4 Main Menu 4-3
4.4.1 Adapter Properties Menu 4-4
4.4.2 Persistent ID Menu 4-4
4.4.3 Device Properties Menu 4-5
4.4.4 Boot Adapter List Menu 4-5
4.4.5 Global Properties Menu 4-6
4.5 Exiting the LSI Logic Boot BIOS Configuration Utility 4-6
4.6 Troubleshooting 4-6
4.7 OpenBoot BIOS 4-7
4.7.1 OpenBoot BIOS Features 4-7
4.7.2 Identifying the FC Devices 4-8
4.7.3 Verifying Installation 4-9
4.7.4 Adapter-Specific Settings 4-10
4.7.5 Interrupt Coalescing 4-13
4.7.6 Set FC Link Speed 4-14
4.7.7 Persistent Device Naming 4-15
4.7.8 Manual Selection of FC Topology 4-17
Customer Feedback

viii Contents
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.

ix
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Figures 1.1 Hardware Connections for the LSI Logic Host Adapter 1-4
1.2 Inserting the LSI Logic Host Adapter 1-5
2.1 LSI7102XP-LC Host Adapter Configuration 2-10
2.2 LSI7102XP-LC Connector and Indicator LED 2-11
2.3 LSI7102LXP-LC Host Adapter Configuration 2-12
2.4 LSI7102LXP-LC Connector and Indicator LED 2-13
2.5 LSI7202XP-LC Host Adapter Configuration 2-14
2.6 LSI7202XP-LC Connectors and Indicator LEDs 2-15
2.7 LSI7202LXP-LC Host Adapter Configuration 2-16
2.8 LSI7202LXP-LC Connectors and Indicator LEDs 2-17
2.9 LSI7202EP-LC Host Adapter Configuration 2-18
2.10 LSI7202EP-LC Connectors and Indicator LEDs 2-19
2.11 LSI7202EP Host Adapter Configuration 2-20
2.12 LSI7202EP Connectors and Indicator LEDs 2-21
2.13 LSI7402XP-LC Host Adapter Configuration 2-22
2.14 LSI7402XP-LC Connectors and Indicator LEDs 2-23
2.15 LSI7402EP-LC Host Adapter Configuration 2-24
2.16 LSI7402EP-LC Connectors and Indicator LEDs 2-25
2.17 LSI7402EP Host Adapter Configuration 2-26
2.18 LSI7402EP Connectors and Indicator LEDs 2-27
3.1 LSIUtil Device Selection 3-5
3.2 LSIUtil Download Options 3-6
3.3 LSIUtil File Download 3-6
3.4 MPTUtil Device Selection 3-7
3.5 MPTUtil Options 3-8
3.6 Interrupt Coalescing Values 3-11
4.1 Select Controller 4-15
4.2 Select Device 4-16
4.3 Inserting Disk Name in Command Line 4-16
4.4 Setting Device 0 as Persistent 4-16
4.5 Clearing Persistent Device Map 4-16

xCopyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.

xi
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Tables 2.1 LSI Logic 2 Gbit/s FC Host Adapter Descriptions 2-2
2.2 Hardware and Software Requirements 2-3
2.3 Maximum Power Requirements 2-5
2.4 LED Appearance to Represent Link Status 2-7
2.5 PCI System ID Values 2-8
2.6 PCI Subsystem ID Values 2-8
2.7 LSI7102XP-LC Link Activity/Link Fault LEDs 2-11
2.8 LSI7102LXP-LC Link Activity/Link Fault LEDs 2-13
2.9 LSI7202XP-LC Link Activity/Link Fault LEDs 2-15
2.10 LSI7202LXP-LC Link Activity/Link Fault LEDs 2-17
2.11 LSI7202EP-LC Link Activity/Link Fault LEDs 2-19
2.12 LSI7202EP Link Activity/Link Fault LEDs 2-21
2.13 LSI7402XP-LC Link Activity/Link Fault LEDs 2-23
2.14 LSI7402EP-LC Link Activity/Link Fault LEDs 2-25
2.15 LSI7402EP Link Activity/Link Fault LEDs 2-27

xii Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.

2 Gbit/s Fibre Channel Host Adapters User’s Guide 1-1
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Chapter 1
Installation Procedures
This chapter contains general information about the LSI Logic 2 Gbit/s
family of Fibre Channel (FC) host adapters. It also provides host adapter
installation instructions. This chapter describes these topics in the
following sections:
•Section 1.1, “General Description”
•Section 1.2, “Quick Installation Procedure”
•Section 1.3, “Detailed Installation Procedure”
1.1 General Description
LSI Logic provides high-performance, cost-effective 2 Gbit/s FC
controllers and host adapters. The LSI Logic controllers and their
associated host adapters that support 2 Gbit/s FC contained in this
User’s Guide are as follows:
Installing these host adapters into your PCI-X system allows you to
connect FC devices. You can use these FC boards in computer systems
with a standard bracket type or with a low profile bracket
(LSI7102LXP-LC or LSI7202LXP-LC).
For specific information about the FC controllers, refer to LSIFC929X Dual
Channel Fibre Channel I/O Processor Technical Manual and LSIFC919X
Single Channel Fibre Channel I/O Processor Technical Manual.
Controller Host Adapter
LSIFC919X LSI7102XP-LC, LSI7102LXP-LC
LSIFC929X LSI7202XP-LC, LSI7202LXP-LC, LSI7202EP-LC, LSI7202EP,
LSI7402XP-LC, LSI7402EP-LC, LSI7402EP

1-2 Installation Procedures
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
1.2 Quick Installation Procedure
This section provides an overview of the installation procedure. If you are
an experienced computer user with prior host adapter installation and FC
setup experience, this section may describe the procedure sufficiently. If
you prefer more detailed guidance for installing the host adapter, proceed
to Section 1.3, “Detailed Installation Procedure.”
For safe and proper installation, refer to the user’s manual supplied with
your computer and perform the following steps:
Step 1. Ground yourself before removing this host adapter board.
Step 2. Remove the host adapter from the packaging and check that it
is not damaged.
Figure 1.1 on page 1-4 illustrates an example of this host
adapter board. Also refer to Chapter 2, “2 Gbit/s FC Host
Adapter Characteristics,” to see more detailed drawings of the
2 Gbit/s host adapter boards.
Step 3. Open your PC cabinet and select an appropriate open PCI slot.
Step 4. Insert the host adapter board.
Step 5. Make any configuration changes.
Step 6. Close your PC cabinet cover.
Step 7. Connect the FC cable to the host adapter.

Detailed Installation Procedure 1-3
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
1.3 Detailed Installation Procedure
This section provides step-by-step instructions for installing the host
adapter. If you are experienced in these tasks, you may prefer to use
Section 1.2, “Quick Installation Procedure.”
1.3.1 Before You Start
Before starting, look through the following task list to get an overall idea of
the steps you will perform. If you are not confident you can perform the
tasks as described here, LSI Logic recommends getting assistance.
Each FC host adapter channel that you install can act as a host for up
to 126 Arbitrated Loop FC devices, not including the adapter itself. Follow
the detailed instructions in Section 1.3.2, “Installing the Host Adapter,”
to install your host adapter board successfully.
1.3.2 Installing the Host Adapter
For safe and proper installation, refer to the user’s manual supplied with
your computer and perform the following steps to install the host adapter.
Step 1. Ground yourself before removing this host adapter board.
Step 2. Remove the host adapter from the packaging and check that it
is not damaged.
Figure 1.1 illustrates an example of this host adapter board.
Also refer to Chapter 2, “2 Gbit/s FC Host Adapter
Characteristics,” to see more detailed drawings of the 2 Gbit/s
host adapter boards.
Step 3. Switch off the computer and unplug the power cords for all
components in your system.
Step 4. Remove the cover from your computer according to the
instructions in the user’s manual for your system, to access the
PCI slots.
Caution: Ground yourself by touching a metal surface before
removing the cabinet top. Static charges on your body can
damage electronic components. Handle plug-in boards by
the edge; do not touch board components or gold

1-4 Installation Procedures
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
connector contacts. LSI Logic recommends using a static
ground strap.
Step 5. Locate the slots for PCI plug-in board installation.
Refer to the user’s manual supplied with your computer to
confirm the location of the PCI slots.
This host adapter requires a 32-bit or 64-bit PCI slot that allows
bus master operation. If a 32-bit PCI slot is used, the portion of
the J1 connector opposite the bracket remains uninserted.
Refer to Table 1.2 for details.
Note: For this host adapter to function as a 64-bit device, it must
be inserted into a 64-bit PCI slot. If the host adapter is
inserted into a 32-bit PCI slot, it functions as a 32-bit
device.
Step 6. On the back of the computer, remove the blank bracket panel
that is aligned with the PCI slot you intend to use. Save the
bracket screw.
Figure 1.1 Hardware Connections for the LSI Logic Host Adapter
SFP
Transceiver
Fibre Channel
Link Activity/
Link Fault LED
PCI Bus Edge Connector J1
LSI Logic Host Adapter

Detailed Installation Procedure 1-5
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Step 7. Carefully insert PCI Bus edge connector J1 (see Figure 1.1)of
the host adapter into the PCI slot.
Make sure the edge connector is properly aligned before
pressing the board into place, as shown in Figure 1.2. The
bracket around the Small Form-Factor Pluggable (SFP)
transceiver cages should fit where you removed the blank panel.
Figure 1.2 Inserting the LSI Logic Host Adapter
Step 8. Secure the board with the bracket screw (see Figure 1.2), then
make the external FC link connection.
Bracket Screw
32-Bit PCI Slots
64-Bit PCI Slots

1-6 Installation Procedures
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.

2 Gbit/s Fibre Channel Host Adapters User’s Guide 2-1
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
Chapter 2
2 Gbit/s FC
Host Adapter
Characteristics
This chapter provides specific details about the physical environment
associated with the 2 Gbit/s family of FC host adapters. This chapter
includes the following sections:
•Section 2.1, “General Description”
•Section 2.2, “Features”
•Section 2.3, “Physical Environment”
•Section 2.4, “Operational Environment”
•Section 2.5, “PCI System ID Values”
•Section 2.6, “PCI Subsystem ID Values”
•Section 2.7, “Unique World Wide Name”
•Section 2.8, “Physical Characteristics”
2.1 General Description
The LSI Logic 2 Gbit/s family of FC host adapters makes use of state-of-
the-art, 2 Gbit/s FC technology to provide the highest possible
performance and most flexible storage configuration available. These
LSI Logic host adapters support 1 Gbit/s or 2 Gbit/s FC speeds, and
detect and correctly set the speed of operation automatically. LSI Logic
host adapters are available with LC optical interfaces using optical
SFP transceivers.
These LSI Logic FC host adapters offer the highest degree of integration
available for your PCI-X or PCI Express based computer system,
allowing for maximum performance, optimized use of system resources,
and true Plug and Play installation.

2-2 2 Gbit/s FC Host Adapter Characteristics
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
This manual serves as a step-by-step guide during the installation of your
LSI Logic host adapter.
Table 2.1 lists the 2 Gbit/s FC host adapters discussed in this User’s
Guide.
Hardware and Software Support – The LSI Logic 2 Gbit/s family of FC
host adapter supports most major software operating systems, such as
Sun Solaris (2.6 and greater), Windows Server (NT 4.0, 2000, XP, 2003),
Linux (RedHat, Suse, Caldera, Turbo), NetWare, and UnixWare. These
host adapters use the Fusion-MPT architecture for all major operating
systems. Fusion-MPT architecture offers the unique feature of having a
single binary operating system driver that supports FC devices and other
bus architectures. Refer to the Fusion-MPT Device Management User’s
Guide for details regarding software support for this family of host
adapters.
Before you use any of this family of host adapters, make sure your system
meets the specific hardware and software requirements shown in Table 2.2.
Table 2.1 LSI Logic 2 Gbit/s FC Host Adapter Descriptions
Adapter Description
LSI7102XP-LC 2 Gbit/s, PCI-X, single-port, standard height bracket, optical
LSI7102LXP-LC 2 Gbit/s, PCI-X, single-port, low-profile bracket, optical
LSI7202XP-LC 2 Gbit/s, PCI-X, dual-port, standard height bracket, optical
LSI7202LXP-LC 2 Gbit/s, PCI-X, dual-port, low-profile bracket, optical
LSI7202EP-LC 2 Gbit/s, PCI Express, dual-port, standard height bracket,
optical
LSI7202EP 2 Gbit/s, PCI Express, dual-port, standard height bracket, no
optics
LSI7402XP-LC 2 Gbit/s, PCI-X, quad-port, standard height bracket, optical
LSI7402EP-LC 2 Gbit/s, PCI Express, quad-port, standard height bracket,
optical
LSI7402EP 2 Gbit/s, PCI Express, quad-port, standard height bracket, no
optics