LST SIM216-1 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
SIM216-1_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Serial Interface Module
SIM216-1
Description
Specifi cations
The Serial Interface Module SIM216-1 provides fi re de-
tection control panels Series BC216 or Series BC016,
respectively, with a galvanically separated RS232C in-
terface. Devices with a serial interface (e.g., protocol
printer, PC with parameter setup software or electronic
monitoring system) can be connected to the fi re detec-
tion control panel with the aid of the componentry. The
transfer rate can be adjusted, if required.
The SIM216-1 occupies one of the two slots for serial
interfaces in fi re detection control panels Series BC216.
In BCnet sectional control panels, only one SIM216-1
module can be installed because one slot is always
used by the Network Interface Module for communica-
tion with the other BCnet sectional control panels. In
BC016 fi re detection control panels, only one slot is
designated for the installation of the Serial Interface
Module SIM216-1.
• Suitable for fi re detection control
panels Series BC216 and BC016
• Parameters for function and baud
rate can be freely set
• Selective event output by means of
fi lters
• Monitoring of the data line
• Galvanic separation
Current consumption at 24V typ. 10mA
Interface RS232C, galvanically isolated, up to 57.6kBaud
Signal lines RxD, TxD, CTS/DTR
Connection type D-SUB plug, 9-pin
Ambient temperature -5°C to +50°C
Dimensions L × W × H 70 × 45 × 20 (mm)
Weight 50g
Part No. 214025
Order name Serial Interface Module SIM216-1