LTE ALM-N245 User manual

ALM-N245 4G MiFi
User Manual
v1.0

content
Chapter 1 Introduction .................................1
1.1 Introduction........................................1
1.2 Appearances and Parts.........................1
1.3 LCD Display......................................2
1.4 Packing Lists......................................3
1.5 Application Scene...............................3
1.6 Sleep Mode........................................4
Chapter 2 Installation Instruction.................4
2.1 Install SIM Card and Battery ................4
2.2 Power on/off Your Device....................6
2.3 Charging............................................6
Chapter 3 Connect to Your Device..............7
3.1 Via USB ............................................7
3.2 Via Wi-Fi...........................................9
3.3 Via WPS Function ............................13
Chapter 4 WebUI Managing Page .............14

4.1 managing page..................................14
4.2 Information ......................................15
4.2.1 Device Information ......................15
4.2.2 Statistics...................................15
4.2.3 Data Limit Settings ......................16
4.2.4 System Logs ..............................17
4.3 Short Messages.................................17
4.4 Phone Book......................................17
4.5 Settings............................................18
4.5.1 Quick Settings ............................18
4.5.2 Network Settings.........................19
4.5.3 WIFI Setting ..............................22
4.5.4 Device settings ...........................25
4.5.5 Firewall....................................31
4.5.6 Router Settings ...........................33
4.5.7 Update .....................................33
Chapter 5 LCD display...............................34
5.1 1th main screen..............................34
5.2 2nd WiFi.......................................35

5.3 3rd Data flow and Battery volume ....35
5.4 4th SMS...........................................35
5.5 5th WPS........................................36
5.6 6th Reset Factory Settings..................36
Chapter 6 Safety Instruction.......................37
Chapter 7 Q&A ..........................................40

1
Chapter 1 Introduction
1.1 Introduction
ALM-N245 is one of the MiFi products that supports CDMA /TD-LTE/LTE FDD
network. The Client Terminal can be connected to ALM-N245 via Wi-Fi or USB,
enabling you to enjoy the fun of high speed internet surfing anytime anywhere.
This User Manual introduces how to install and use this device. For more
information about network connection service, please consult Your network
operator.
Note:
Long time working of this device can cause sectional environmental
temperature rising and heat generation, in that case, the device may automatically
power off to realize self safety preservation. Therefore, do not place the device in a
closed environment or environment with small cooling space. When this situation
happens, please place the device in a ventilating space to cool it adequately, and
then start the device normally.
1.2 Appearances and Parts
The appearances and parts of this product are shown in the following picture.
This picture is for reference only, please prevail in kind.

2
1. Charger/USB
Interface
Charger interface;
USB interface between device and Client Terminal.
2. LCD Display
To instruct device conditions.
3. Power Button
Press Power Buton to power on/off the device.
Awake the device when it is in Steep Mode.
Double click power key quickly to switch screen.
4. Reset
Hardware restore factory settings,long press 3 seconds.
5. SIM Card Slot
Used to insert the SIM card.
Note:
When the device is turned on，the LCD screen will be closed after 1 minute.
1.3 LCD Display
Indicator
Description
Indicates network signal.
Number of users connected through WLAN.
Indicates battery capacity.
Connect to CDMA-1X network.
Connect to CDMA 2000 network.

3
Connect to TD-LTE/LTE FDD 4G network.
1.4 Packing Lists
A host
A USB cable
A guarantee card
A certificate
1.5 Application Scene
This device support multiple Client Terminals share the internet via Wi-Fi or USB.
The following picture is for reference.
Remark:

4
1.Connect the Client Terminal to this device via Wi-Fi or USB.
2.Before connecting via Wi-Fi, make sure the Client Terminal supports Wi-Fi
function.
1.6 Sleep Mode
When the WLAN function is turned on and the device is powered only by battery,
if no Client Terminals are connected to the device within 10 minutes, the device will
enter into Sleep Mode, and the LCD display will be off. In Sleep Mode, WLAN
function will be turned off, awake the device by pressing Power button, and then the
LCD display will be on.
Chapter 2 Installation
Instruction
2.1 Install SIM Card and Battery
1.Lift up the back cover as shown in the following picture, remove the back
cover after it detaches from the clip.As shown in the following picture, insert the
SIM card into SIM card slot.

5
2. As shown in the following picture, place the battery into battery slot.
Remark
Please insert the metal contact end of the battery first.
3. Align the back cover with the clip, place the back cover on the device, and close
the back cover as shown in the following picture.

6
2.2 Power on/off Your Device
Press the Power button to turn on/off Your device.
Remark:
When the LCD display is on, Your device has already been powered on.
2.3 Charging
1. Connect Your device to the computer via USB line directly.

7
2. Connect the device to AC power socket via charger and USB line.
Note:
The plug of USB line can only be inserted into Your device in particular direction,
please do not insert and pull it in an inappropriate way.
Chapter 3 Connect to Your
Device
3.1 Via USB
1. Use a USB line to connect Your device to the Client Terminal.

8
2.Turn on Your device.
3.Choose an installing language.
4. Complete installation according to system prompts . (Skip this step for
drive-free version)
Remark:
1.If the system does not support automatic installation, please run
DriverSetup.exe program in My Computer> CD-ROM drive to start software
installation.
2.After the software is installed successfully, the device driver will be installed
successfully at the same time. Meanwhile in the Device Manager shows:
5. After installation, in Start> Program menu will show kfi-driver Client Terminal
Program Group, meanwhile there will be a Shortcut icon on the desk (if Create a
shortcut is clicked during installation). Later, connection between Client Terminal
and the device will be created successfully.

9
3.2 Via Wi-Fi
1.Turn on the device, wait for 1~2 minutes till the device initialization is
completed.
2. Before connecting via Wi-Fi, please configure the computer. Take Windows 7
as an instance, configure Wi-Fi connection Internet Protocol.
A)Click Start->Control Panel->Network and Internet->Network and Sharing
Center, choose Change Adapter Settings.
B)Right-click on Local Connection, choose Property.

10
C)Click Internet Protocol (TCP/IP), choose Property.

11
D)Select Obtain an IP Address Automatically and Obtain DNS Server Address
Automatically, click Confirm to complete configuration.
3.Select the corresponding SSID of the device, click Connect.

12
4. Enter the Key and click Connect.
Remark:
In order to prevent the device from being used illegally, there may appear a
prompt during installation and demanding the Key. Please refer to the device label
to obtain the default SSID and Key info, or double-click WPS function button to

13
obtain SSID and Key.
5. Later, the Client Terminal will automatically connect to Your device,
3.3 Via WPS Function
If the client supports WPS features,you can refer to Chapter 5 LCD to operate
the WPS.
Note:
Regarding the Client Terminal WPS operation process, please refer to the
related instructions of client terminal.
1. Built connection between Client Terminal and device.
2.Start the browser, type http://192.168.0.1 or http://kfi.home/ in the address

14
bar to enter managing page.
Remark:
Advise to use the following browsers: IE (7.0 or higher), Firefox (3.0 or higher),
Opera (10.0 or higher), Safari (4.0 or higher) or Chrome (5.0 or higher).
Chapter 4 WebUI Managing
Page
4.1 managing page
The Login interface of managing page is shown as follows.

15
4.2 Information
This page includes device information, Statistics, Data Limit Settings and
System Logs.
4.2.1 Device Information
SIM Card Number
SIM Card Number provided by network operator.
IMEI
International Mobile Equipment Identification Number.
IMSI
International Mobile SubscriberIdentification Number.
Network Name（SSID）
Click change to enter corresponding page to rename SSID.
Max Access Number
Users number accessd the device，options is 1~10.
Wi-Fi Performance
Set Wi-Fi work range，Click the Change key to enter related setting interface.
LAN Domain
LAN domain which device located.
IP Address
IP address of device.
MAC Address
MAC address of device.
Software Version
Shows the version of current WEB page.
Firmware Version
Shows the current firmware version.
Hardware Version
Shows the current hardware version.
4.2.2 Statistics
The page can display the current upload and download speed in this page, and
can also display the data flow used and duration connection time of curent month.

16
4.2.3 Data Limit Settings
You can set the enable and disable to the flow according to your requirements.
When the data flow reached the set limitation, there will appear a reminding popup
window.