1. SPECIFICATIONS
AUDIO INPUT
Connectors XLR and 1/4 jack
Type RF filtered , servo-balanced input
Max. Input Level +21 dBu balanced and unbalanced
Impedance 50kOhm balanced , 25kOhm unbalanced
CMRR typ. 40 dB, >55dB@1KHz
AUDIO OUTPUT
Connectors XLR and 1/4 jack
Type Electronically servo-balanced output stage
Max. Output Level +21 dBu balanced and unbalanced
Impedance 60 Ohm balanced , 30 Ohm unbalanced
FUNCTION SWITCHES
Monitor monitors the side-chain key signal
Couple activates FlexLink function
Mode gate/expander switch
Filter activates the side-chain Filter
INDICATORS
Gain Reduction 8-segment LED display : 1/3/6/10/15/20/30/40 dB
" - " indicator signal is above threshold
" Hold " indicator signal is reaches threshold
" + " indicator signal is below threshold
LED indicator for each function switch
GATE SECTION
Type UTR ( Ultra Transient Response ) gate
Range variable ( 0 to -80 dB )
Threshold variable ( BYPASS to +10dBu )
Attack program dependent
Hold variable ( 0 to 4sec )
Release variable ( 0.05 to 4 sec )
EXPANDER SECTION
Type IRC ( Interactive Ratio Control ) expander
Attack program dependent
Ratio variable ( 1:1 to 1:4 )
PARAMETRIC SC FILITER
Frequency variable ( 100 Hz to 10KHz )
Bandwidth variable ( 2.3 to 0.7 Oct. )
SYSTEM SPECIFICATIONS
Frequency Respone 10Hz to 100KHz +/- 3 dB
Noise >90dBu , unweighted , 22Hz to 22KHz
THD 0.02% typ. @+4dBu , 1KHz , GAIN 1
IMD 0.01% typ. SMPTE
Crosstalk <-100 dB , 22Hz to 22KHz
POWER SUPPLY
AC 95-120 Vac~60Hz Fuse : 400mA ( slow blow )
AC 210-240 Vac~50Hz Fuse : 200mA ( slow blow )
POWER CONSUMPTION
18 Watts
DIMENSIONS
483(W) * 194.5(D) * 44(H) mm ( 19 * 7.7 * 1.7 )
WEIGHT
3.3kg
SPECIFICATIONS FRO ALTO GATE
