Lucci LEDlux 259985 User manual

Installation Instructions
1 | P a g e v 1 . 0 ( 0 5 / 2 0 1 8 )
SPACE LED FLOOR LAMP
SKU# 259985, 259986
Rated Voltage 9-11V DC, 0.5A
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of the product. Please keep the instructions for future reference.
Warranty
•This product is covered by a 3 year warranty. Please retain proof of purchase.
•Warranty will be void if there is any damage due to improper usage or modification to the product.
•Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation requirements
•Select a suitable location for the fitting;
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the fitting.
- Ensure the fitting is not installed next to any air vents and is not in any moist or damp areas.
•Only use the supplied plug in LED driver with this fitting.
•Take care not to pull any electrical wires during unpacking as this may damage the connection.
•Lay out all the components on a smooth surface and make sure there are no components missing before
assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•Check whether the fitting has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable lamp is fully
assembled and ready to use for the first time.
Installation directions
1. Install the base onto the lower rod.
2. Remove the cord protection cap on the middle rod.
3. Install the middle rod onto the lower rod.
4. Turn and make sure it is tightened.
5. Remove the cord protection cap on the fitting head.
6. Install the fitting head onto the middle rod.
7. Turn and ensure it is tightened. Do not overtighten.
8. Connect the quick connector of the adaptor to the light fitting.
9. Insert the adaptor into the mains socket outlet and ensure it is fully plugged in.
10. Use the cord-line switch to turn the lamp on/off.

Installation Instructions
2 | P a g e v 1 . 0 ( 0 5 / 2 0 1 8 )
Safety tips
•Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning or
adjustment to the fitting.
•To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
•Young children should be supervised to ensure that they do not play with the portable lamp.
•Handle the fitting and/or shade with care to avoid any damage or breakage.
•Select a suitable location away from liquids and hazards.
•Ensure that the fitting does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
•To clean, wipe with a damp clean cloth. Never soak the fitting with water.
Specifications
SKU # 259985 259986
Model # FEL-1311-BLK FEL-1311-WH
Colour Black White
Rated Voltage 9-11V DC, 0.5A
LED Specs 4.5W, 380 Lumens, 3000K Warm White
Weight 2.2kg
Dimensions H:1400mm W:220mm L:500mm Max.