LUCCI MAYA User manual

Installation Instructions
1 | P a g e v 2 . 0 ( 0 2 / 2023)
MAYA TABLE LAMP
SKU# 269370, 269371, 269372
Rated Voltage 220-240V~ 50Hz
To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and
use of this product. Please keep the instructions for future reference.
Warranty
•This portable luminaire is covered by a 12-month warranty valid for in-store replacement or refund only.
•The warranty period starts from the date of purchase. Please retain the proof of purchase.
•Warranty will be void if there is any damage due to improper usage or modification to the portable luminaire.
•Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•Select a suitable location for this portable luminaire:
- Ensure it is on a flat and stable surface.
- This portable luminaire is suitable for indoor use only.
- Do not place flammable material near or over the portable luminaire.
- Ensure the portable luminaire is not installed in direct line of an air vent/system.
- If the portable luminaire is placed in an area prone to moisture, ensure that the area is well ventilated, and an
appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product
fault, and as such is not covered under warranty.
•Do not exceed the maximum wattage rating.
•Take care not to pull any electrical wires during unpacking as this may damage the connection.
•Lay out all the components on a smooth surface and make sure there are no components missing before
assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•Check whether the portable luminaire has been damaged during transport. Do not operate/install any product
which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or
replacement.
•Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable lamp is fully
assembled with the globe installed and is ready to use for the first time.
Installation Directions
1. Remove all packaging material from the portable luminaire and fabric lamp shade (B).
2. Remove the lamp holder ring (C) from the lamp holder (A).
3. Install the fabric lamp shade (B) onto the lamp holder (A) and secure using the lamp holder ring (C).
4. Install a globe (D - not included) into the lamp holder. Do not exceed the maximum rated wattage.
NOTE: This portable luminaire is suitable with dimmable globes only. It is NOT suitable to use with 3 step
dimmable globes.
5. Select a suitable location for the portable luminaire. See the installation requirements above.
6. Insert the plug (F) into the mains power socket outlet and ensure it is fully plugged in.
7. Turn power on at the mains power socket outlet.
8. This portable luminaire has a 3-step dimming function, operating in the following order:
•Touch the button (E) once, and the portable luminaire will turn on and light up at 30% brightness.

Installation Instructions
2 | P a g e v 2 . 0 ( 0 2 / 2023)
•Touch the button (E) a second time, and the portable luminaire will light up at 60% brightness.
•Touch the button (E) a third time, and the portable luminaire will light up at the 100% brightness.
•Touch the button (E) a fourth time, and the portable luminaire will turn off.
9. You can charge your device via the USB output on the base of the portable luminaire. The rating of the USB output
is USB-C, 5V DC, 2A. Refer to the instruction manual of your device for the required charge ratings.
Safety Tips
•Always ensure the power is OFF and the portable luminaire has cooled down before performing any maintenance,
cleaning, changing the globe or making any adjustment to the portable luminaire.
•If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
•To avoid injury or damage to the portable luminaire, ensure that power leads and screws are secure before
connecting the power.
•Young children should be supervised to ensure that they do not play with the portable luminaire.
•Handle the portable luminaire and shade with care to avoid any damage or breakage.
•Select a suitable location away from liquids and hazards.
•To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
•Ensure that the portable luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners
etc.
Specifications
SKU #
269370
269371
269372
Colour
Black
Chrome
Bronze Finish
Rated Voltage
220-240V~ 50Hz
Rated Wattage
45W Max. (3-step dimming)
Lamp Holder
ES / E27
USB Output
USB-C, 5V DC, 2A
Weight
2.0kg
Dimensions
H:545mm L:340mm W:300mm