The Directory feature allows you to search for the extension of another user in
your location by keying in the user’s name at the dial pad.
To search the directory for a name:
Press the Feature button and then press the dialpad number corresponding
to the Directory feature (if administered; see list of programmed features
earlier in this document).
Key in the last name of the user you wish to call. Keep keying in more
letters of the last name until the name appears on the display.
You can also use the Next feature (if administered) to scroll through names.
To use the Next feature press the Feature button and then press the
dialpad number corresponding to the Next feature.
When the name of the party you wish to call appears on the display use the
Call Disp feature(if administered) to automatically dial the number. To use
the Call Disp feature press the Feature button and then press the dialpad
number corresponding to the Call Disp feature.
To Exit the Directory Feature, press the Normal Feature by pressing the
Feature button and then pressing the dialpad number corresponding to the
Normal feature.
To search for a new name exit the Directory feature and start again.
You can program 5 numbers on a Personal Abbreviated Dialing List (in some
cases you may have a 10 number list). To program a number follow the steps
below:
1) Pickup your handset or press “Speaker”
2) Dial the abbreviated dialing programming code: *0
3) Dial the number “1” (this is the number of the list we use)
4) Dial the position on the list (1 through 5) you want to program.
5) Dial the phone number you want to add (remember to include a 9 if
it’s an outside number)
6) Press # to save.
