Lucid Audio HLT-BT-H-PH Series Instructions for use

AMPEDTM Bluetooth® Headphones
Easy Start Guide
(HLT-BT-H-PH Series)

Turning the Device ON/OFF
Roll the Power knob upwards until you hear
the click to turn the unit on OR downwards till
you hear the click to turn the unit off.
Once connected, the Bluetooth® Indicator Light flashes blue every
2 seconds to indicate successful pairing.
Pairing First Bluetooth® Device
Press and hold the Bluetooth® Sync button
for 1 second to enter pairing mode after
device is turned on (this will time out after
60-seconds).
Open Bluetooth® wireless setting on your
phone or mp3 player.
Make sure Bluetooth® is on and select “Lucid
BT” to connect.
Auto re-connects to previous last connected
device during pairing if the BT device has
been paired previously.
Once paired, blue LED will be flashing every
10 seconds.
Power / Volume Knob
Adjusting Outside Ambient
Sound Level
Roll the Volume knob upwards to increase the
outside ambient sound level or downwards to
decrease the outside ambient sound level.
Bluetooth® Sync button
Bluetooth® LED

Adjusting Bluetooth® Volume
Roll the Bluetooth® Volume knob upwards to
increase the Bluetooth® device sound level or
downwards to decrease the Bluetooth®
device sound level.
Phone Call Functions
Bluetooth® Volume Knob
Bluetooth® Sync button
Answering Call: Short press BT button
Rejecting Call: Long press BT button
Cancelling or Ending Call: Short press BT
button
Last Number Dialed: Double press BT
button
Music Audio Pause/Play
Short press the Bluetooth® Sync button to
pause/play your music.
Bluetooth® Sync button