Lulani Capri BA-600-01 User manual

1
Installation Instructions
BA-600-01
Single Handle Bathroom Faucet
Thank you for selecting Lulani.
To ensure that your installation proceeds smoothly, please read
these instructions carefully before you begin.
Capri
1. Faucet
2. Above sink hardware: rubber O-ring
3. Below sink hardware: rubber washer,
metal washer, mounting nut
4. Water supply lines
5. Escutcheon (4” Baseplate)
6. Over-flow pop-up drain
Parts Included
3
Recommended Tools (not included)
1. Adjustable Wrench
2. Phillips Screwdriver
3. Safety Goggles
4. Flashlight
5. Bucket
6. Measuring Tape
7. Plumber’s Putty
8. Channel Locks
9. Allen Key
1
Fa u c e t C o
2
6
Note: This faucet
has been packaged
with an over-flow
pop-up drain. DO NOT
use with a non-over-flow
sink.
5
4

Caution: Tips for removal of old faucet
Always turn off the water supply before removing the existing faucet or replacing any part of the faucet.
Open the faucet handle to relieve water pressure and ensure that water is completely shut off.
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it
periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the
finish and void your warranty.
Step 1
Step 2
2
Single hole bathroom faucets can be installed
in a sink with a single hole OR a sink with 3 holes,
typically meant for a 4” centerset faucet.
A. For 1-hole installation, insert the faucet’s (1)
water supply hoses (2) through the base (3) and
rubber o-ring (4). Then, insert the assembly
through the hole.
B. For 3-hole installation, insert the faucet’s (1)
water supply hoses (2) through the 4” baseplate (3).
Then, insert the assembly through the center hole.
The baseplate will cover the surrounding holes.
3
1
2
From under the sink, secure it by installing the rubber
washer (1), metal washer (2), and mounting nut (3)
over the hoses and on to the bottom of the faucet.
Use a Phillips screwdriver to secure the screws of the
nut. Do not over tighten!
3
1
2
AB
1
2
3
4

Step 3
Connect the water supply lines to the water valves. Tighten each
end with an adjustable wrench. Do not over tighten!
Check all connections (shown with arrows in the image) for leaks.
Re-tighten if necessary.
3
Step 4
From the top of the drain hole, place the drain (1) through the
installation hole. Make sure that the rubber o-ring (2) is on the
top side of the sink. From under the drain hole, install the rubber
gasket (3) and metal nut (4) by hand twisting on to the tail pipe
of the drain. Then, install the tail pipe to the wall plumbing.
2
1
3
4
What’s an over-flow pop-up drain?
Over-Flow
Non-Over-Flow
Over-Flow
Non-Over-Flow
The primary purpose of the over-flow drain is to help your sink drain
faster. The over-flow on the drain works in coordination with the
primary drain to prevent flooding.
*Note: Lulani faucets are packaged with over-flow drains by default. If you have a specialty
sink and need a NON-over-flow drain, use the QR code below to view our alternative drain
options. Use code [FREEDRAIN] at checkout to receive a free drain, just pay for shipping.
*Limit of 1-time use per customer
*Limited to the number of faucets purchased

Step 5
4
Congratulations! You’ve successfully finished installing your new faucet. For troubleshooting questions or
concerns, please reference the Owner’s Manual or visit our website at www.lulani.com.
We value your opinion! Don’t forget to leave us a review.
After installation is complete, remove the aerator
to flush for any possible debris. Turn the faucet
handle all the way on, turn on the hot and cold
water supply and flush water lines for one minute.
Re-install the aerator once complete.
About our products
The Capri Commercial Grade Single Handle Bathroom Faucet is a smart choice for any modern enterprise.
Inspired by its high-fashion Italian namesake, bold faucet features a durable brass body construction, ADA
compliant design and a Limited Lifetime Warranty for home use, or 5-Year Limited Warranty for commercial
use. Available in chrome or brushed nickel, it’s everything you need to ensure your customers know you leave
no detail unconsidered.
BOLD, MODERN DESIGNS
Inspired by the world’s most exotic locations, every Lulani product is designed to leave a lasting impression. After
the initial sketch, our talented team of product engineers complete an extensive R&D process ensuring each piece
performs beautifully.
ONLY THE HIGHEST QUALITY OF MATERIALS
We settle for nothing short of perfection. That’s why we source only the finest raw materials, components, and
finishes. No shortcuts. Only the best for you and your family.
BEAUTY THAT LASTS A LIFETIME
Our quality control experts meticulously test and retest each and every one of our products to ensure they exceed
even the highest standards for health, safety and durability. From corrosion, pressure and decay resistance to flow
rate and ease of assembly, all of our craftsmanship is backed by an industry-leading Lifetime Limited Warranty.
WARNING
Cancer and
Reproductive Harm
www.P65Warnings.ca.gov