Lumantek ez-Liveshow ez-Pro VS6 User manual

ez-Pro VS6 / Manual v 1.0.0
manual
ez-Pro VS6 6CH Switcher
By LUMANTEK

ez-Pro VS6 Manual
ez-Pro VS6 Manual
Revision Number: 1.0.0
Distribution Date: August. 2016
2
Copy Rights
Copyright © 2006~2015 LUMANTEK Co., Ltd.
All Rights Reserved
This document contains information that is proprietary to LUMANTEK.CO., LTD. The information in this
document is believed to be accurate and reliable; however, LUMANTEK assumes no responsibility or
liability for any errors or inaccuracies that may appear in this document, nor for any infringements of
patents or other rights to third parties resulting from its use.
This publication may contain technical issues, inaccurate information or typos. These will be revised in
revised edition, if there is any. No part of this publication is subject to be reproduced, stored in retrieval
system, or transmitted in any forms, or any means without the prior consent by Lumantek.
Trademarks
HD ENCODULATOR TM, SD ENCODULATOR TM LUMANTEK Logo, Mega CruiserTM, ORIXTM, X-CruiserTM,
DTA-PlusTM, Media BlasterTM, are Trademarks of Lumantek. Co., Ltd.
Any other trademarks than stated above in this document belongs to its pertinent corporation.
Warranty Period
Lumantek’s products comes with One(1) year limited warranty.Please contact below if you need more
information.
LUMANTEK CUSTOMER SERVICES
[e-mail] / TEL:[phone] / FAX:[phone]

ez-Pro VS6 Manual
3
Installation Precautions
This page states the safety measures the users must take to avoid circumstances where the system may occur
physical damages or injuries. Please THOROUGHLY go over this page before the system installation/operation.
-Maintain dust FREE condition during and after System Installation/Operation.
-Please place the system cover in a safe location when opened.
-Securely stow tools and cables away from the passages.
-Avoid wearing loosened clothes or accessories during installation/Operation.
-Avoid any unnecessary actions that may damage/harm system or personnel.
-Do NOT open the system unless advised by Lumantek representative. Lumantek takes no responsibility on
units with broken RMA seals.
General Precautions
Power Precautions
-Please check cable overload before connecting the system to the power supply.
-Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source.
-Avoid operating on wet floors. Make sure power extension cables, floors, and instruments are grounded
and in a safe operating condition.
-Please discharge static electricity by touching grounding metals before starting hardware installation.
-The grounding parts must be disassembled last.
-Manufacture takes no responsibilities on Direct/Indirect losses or damages due to use of inappropriate
parts or services by unauthorized service provider
-Supplying power during the system installation may cause damages to the system and personnel.
AC Power Precautions
-This unit utilizes AC power, the cord comes with a grounding function.
-Please connect the system to the power socket with groundings.
-Use Green/Yellow 0.75mm2 (18AWG) or higher grade grounding cables.
-Do NOT block power sockets with tools or boxes. Please keep it clear at all times.

ez-Pro VS6 Manual
Contents
1. Introduction ---------------------------------
2. VS6 Interface -------------------------
2.1 System Information------------------------
2.2 Device Components -------------------------
2.3 HDMI Multi-view Interface --------------
2.4 Console Interface ------------------------
2.5 Main frame Interface -----------------
2.6 LCD Screen ------------------------------
2.7 System Specification------------------------
05
06
〃
〃
07
08
10
11
13
4

ez-Pro VS6 Manual
5
Matrix Switcher ez-PRO (VS6)
6 HD-SDI Input / 4 HD-SDI Ouput Switcher
Features
①6 SDI inputs, 4 SDI outputs.
②1 Separate SDI Input for Key.
③One extra SDI output for PGM Monitoring..
④Physically 7 SDI inputs and 5 SDI output .
⑤ez-PRO (VS6) supported resolutions are;
'1080i60/1080i59.94/1080i50/720p60/720p59.94/720p50/625i(576i)/525i(480i)' .
⑥HDMI output is related to system resolution and supported resolutions are;
'1080p60/1080p50/720p60/720p50'/576P/480P.
1. Introduction
ez-LiveShow is a Video/Audio brand which is dedicated to small studio solution, created by
combination of Lumantek’s AV encoding and Video switching technology.
ez-Pro VS6 is a flagship device, which has 6 media/camera SD/HD-SDI inputs and 4 outputs.
We applied a frame sync for each input. Simple control on board Panel or remote control with
console. S/W Fill & Key option brings the features you could find only in the high-end system.
The video is processed with 4:2:2 10 bit predecessor, embedded analogue audio and external
Stereo XLR is supported. All channel videos and audios are separately controlled.

ez-Pro VS6 Manual
6
Power
2. VS6 Interface
2.1 System Information.
2.2 Components.
< VS6 Main frame – Front>
Power LED
< VM6 main frame – Rear>
RJ45 port
For console
USB 2.0 / debugging and
command management
HDMI port
SDI-input/output monitoring
SDI Input *
1/2/3/4/5/6/7
SDI Output **
PGM/CLEAN/
AUX1/AUX2
Audio Input
(Left/Right)
*SDI Input
If you use Fill/Key feature use 6th /7th SDI port.
If you do not use Fill/Key feature , do not use 7th SDI port
** There are two SDI PGM Outputs. (two exactly same signals)
VS6 Main Frame Console (Optional)
GND

ez-Pro VS6 Manual
7
2.3 HDMI Multiview Interface
PVW
Monitoring
PGM
Monitoring
VS6 Input Monitoring
Input 1 Input 2 Input 3
Input 5 Input 6 BAR
Input 4
BG
(Background)

ez-Pro VS6 Manual
8
2.4 Console Interface
LCD Screen
①Display the selected transition effect and duration time on VS6 system
- Selected screen transition effect [Wipe ↑↓←→,Mix].
- Display ‘Transition time’ when you select ‘Auto’ function.
②Display system resolution of VS6.
Supported resolution are ;
1080i60/1080i59.94/1080i50/720p60/720p59.94/720p50/625i/525i.
You can change resolution on VS6 Main Frame.
③Displays the resolution of input channels 1/2/3/4/5/6.
A E
D
B
C F
A
G

ez-Pro VS6 Manual
9
E
D
B
C F
G
Transition effect duration control
①Adjusting transition effect duration function.
B
PGM (Program)Control
①Select input channel ‘1/2/3/4/5/6/BAR/BG’ for Output [Main] and display current selected
input channel.
②Select input channel '1/2/3/4/5/6/BAR/BG/KEY/CLN/PVW/PGM’ for Output [AUX1,AUX2]
and display current selected input channel.
C
PVW (Preview)Control
①Select input channel '1/2/3/4/5/6/BAR/BG' for output [Main] or display the prepared input
channel on PVW
D
Output control/Key/EXT Audio/FTB(Fade to Black) control
①Select Output Channel 'Main/Aux1/Aux2'.
②Selected Output [Main], and apply 'Key' feature 'On/Off' .
③Selected Output[Main/Aux1/Aux2], and apply external audio feature 'On/Off'.
④Selected Output[Main], and apply 'FTB' feature 'On/Off'.
E
T-BAR
①Transition effect [T-BAR] and position on [Main].
F
* VS6 Main Frame and console are connected via Direct cable.
** Do not use crossover cable.
Screen Transition effects
①Transition effect 'Wipe/Mix/Cut/Auto' on [Main].
G

ez-Pro VS6 Manual
10
2.4 Main Frame interface (Front)
A
B D
C
LCD Screen
①Display output channel of PVW/PGM/AUX1/AUX2.
②Display KEY feature ‘on’ and ‘off’.
③Display Duration of Transition effect.
④Display system resolution
A
Select Output
①Select the PVW or sub-menu ’A’.
②Select the PGM or sub-menu ’B’.
③Select the KEY 'On/Off' or sub-menu 'C'.
④Select AUTO to enable auto transition or sub-menu 'D'.
B
Select Input
①Select output channel '1/2/3/4/5/6' or select sub-menu '1/2/3/4/5/6'.
C
Select Menu
①Push hold ‘SET’ button to enter sub-menu.
②Push ‘SET’ button to move menu.
③Push and hold ‘SET’ button to exit from sub-menu..
D

ez-Pro VS6 Manual
11
* LCD screen configuration - example
Boot the VS6 main unit
Main Display
Push & Hold SET button to
enter ‘Menu’
Press ‘SET’ Button
Push & Hold SET button to To
exit from the ‘Menu’
Press ‘SET’ Button
Press ‘SET’ Button
Press ‘SET’ Button
Press ‘SET’ Button
Press ‘SET’ Button
Press ‘SET’ Button

ez-Pro VS6 Manual
12
** LCD Screen Description
•Display Input channel of PVW/PGM/AUX1/AUX2.
•Display KEY feature ‘On’ and ‘off’.
•Display Transition effect duration.
•Display system resolution.
•Display resolution information of Input Channel '1/2/3/4/5/6'.
•Select VS6 System Resolution.
Resolutions of Input channels ‘1/2/3/4/5/6’ should be identical to the
system supported resolutions below.
'1080i60 / 1080i 59.94 / 1080i 50 / 720p 60 / 720p 59.94 / 720p 50 /
625i / 525i'.
•Select Transition effect.
•Select BG color.
•Save System Configuration.
•Load saved System Configuration.
•Reset to factory default.
•Select between 'input channel Audio or external Audio' for Output channel
[PGM/AUX1/AUX2].
•Select the Audio transition effect for Program [PGM].
•Select transition duration time on Output channel [PGM].

ez-Pro VS6 Manual
13
2.6 System Specification
ez-Pro 6x4 Switcher(model:VS6)
Input
Video Input: SD/HD-SDI(BNC 75Ω) x6
Fill Input(Option): SD/HD-SDI(BNC 75Ω) x1
Key Input(Option): SD/HD-SDI(BNC 75Ω) x1
Audio Input: Stereo XLR x2
Output
Video Output: SD/HD-SDI(BNC 75Ω) x4
Multiview Output: HDMI x1, (1080P @60/50, 720p @ 60/50, 576P @5
0, 480P @60)
Internal Processing: 4:2:2 10bit
Resolution supported
1920 x 1080i @ 59.94/60/50
1280 x 720p @ 59.94/60/50
720 x 576i @ 50 (625i)
720 x 480i @ 59.94 (525i)
Management
Control Buttons @ Front: Input select x6, Output select x4,
Menu select x1
LCD @ Front: Status & Control
Large 'L' logo LED @ Front: Easy to Identify Device Status
USB @ Rear: Easy to use GUI application, Firmware Update
Physical
Dimension:44(H) X 483(W) X 240(D)(excluding connectors)
Power Input: 115~240VAC @ 50/60Hz, Operation Temperature: 0~40℃
Power Consumption: 30W(max.), Weight: 3.1 kg