Lumary STAR LK20110001/2 Guide

LUMARY SMART
FLOODLIGHT RGBW
START GUIDE
Lumary

Attention
1. Do handle carefully in transportation.
2. Do not disassemble the xture for non-professional.
3. The xture work under AC high voltage and current, it should be installed where
can't be touched easily. The connection must be completely sealed and be earthed.
4. the external exible cable or cord of this luminaire cannot be replaced; if the cord
is damaged, the luminaire shall be destroyed.
5. The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similarly qualied person.
6. The surface where it's positioned must be rm enough to ensure safety
7. Ensure the voltage of the electricity system is in the range of working voltage for
the xture. Otherwise, lifetime of xtures will be inuenced.
8. The protection grade is IP66.it's water-proof. Can work in the rain. But can't work
underwater.
9. Installation and maintenance should be operated by a professional.
What’s in the Box
Get Ready
• Lumary Smart Floodlight START GUIDE
• Know your Wi-Fi network and password
• Make sure your mobile device is running iOS 13.3 or higher and Android 9.0 or higher
• Make sure you're connecting to a 2.4GHz Wi-Fi network (Lumary can't connect to
5GHz networks)
Lumary Smart
Floodlight
START GUIDE
EN
DE
FR
ES
I T
1

Instruction Manual for STAR Series with Lumary Wi-Fi 20W/30W
LK20110001/2
LK20110003/4
EN
DE
FR
ES
I T
2

3
EN
DE
FR
ES
I T

Log into the App.
2 Register a Lumary account
Enter your mobile phone number
or email address.
1 Download the Lumary App
Note: Please select your region and country.
EN
DE
FR
ES
I T
4

NOTE: Lumary can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
3Connect: Easy Mode
STEP 1
Choose “Light Source(BLE+Wi-Fi)”.
Select upper right corner “EZ Mode’’
STEP 2
STEP 4
Enter your Wi-Fi network and
password.
STEP 5
The Lumary App will
connect to your devices.
******
STEP 3
Make sure light is rapidly
ashing white.
If not, reset to reach Easy Mode
to connect.
Press “Next ” in the App.
Open the Lumary App. In the top
corner of the Devices screen, click (+).
5
EN
DE
FR
ES
I T

STEP 5
The Lumary App will connect to
your devices .
NOTE: Lumary can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
4Connect: AP Mode
STEP 1
Make sure light is
slowly ashing white.
If not, reset to reach
AP mode.
STEP 2
Open the Lumary App. In the top
corner of the Devices screen, click (+).
STEP 3
Press “Next” and enter
your Wi-Fi details.
Choose “Light Source(BLE+Wi-Fi)”.
Select upper right corner “AP Mode’’
******
Follow the instructions to choose
the device from your Wi-Fi list.
STEP 4
EN
DE
FR
ES
I T
6

Make sure light is rapidly ashing white.
If not, reset to reach Easy Mode to connect.
Press "Next" in the App.
Enter your Wi-Fi network and password.
Open the Lumary App. In the top
corner of the Devices screen, click (+).
Choose "Light Source(BLE+Wi-Fi)".
Select upper right corner "Bluetooth"
Connect: Bluetooth
Please follow the application guidelines for the next steps.
If you have any questions, please contact us in time.
7
EN
DE
FR
ES
I T

Frequently Asked Questions
1. Can I share with family and friends?
Yes, you can share access to your Switch and any other Lumary device. In the
Lumary App, press the “Prole” button and click on “Device Sharing” to give or
revoke sharing permissions. In order to share, the other user should already
have downloaded the Lumary App and registered an account.
2. Can I group multiple Lumary devices together?
Yes, you can group multiple same-type devices by room, location, or however
else you want. The same devices can be in multiple groups. For example, if you
create a group for “Bedroom” and another group for “Entire House” ,your
Bedroom lights can be included in both groups. From your main device list, click
on one of the devices you want to group, press the “ ” button on the top right
for advanced settings, and click “Create Group” .You’ll be able to name a new
group and choose which devices you’d like to group together.
3. How many devices can I control?
Lumary App can control an unlimited amount of devices in an unlimited amount
of locations. Your router may have a limit of how many devices can be connected
to one router.
4. My Lumary device has a funny name. How do I rename it?
From your main device list, click on one of the devices you want to rename, press the
” button on the top right for advanced settings, and click “Modify Device Name”
(or “Modify Group Name”). You’ll then be able to choose a more familiar name.
“
5. What should I do if the device Appears oine or is unreachable?
Make sure your Wi-Fi router is online and in range, and check that you have the
latest Lumary functionality by clicking “Check for rmware update” in your device
settings. If power is connected but the switch is not responding, hold down the
Restart button to cycle the fuse and give the switch a jump start.
6. What’s the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the
conditions of the room. Check with your router specications for exact range data.
7. If my Wi-Fi internet goes down, will Lumary App still work?
Lumary products need to be connected to Wi-Fi in order to use them remotely.
8. What does the white light mean?
The white light indicates power. If the white light is on, the switch is receiving
power; if it is o, it is not receiving power. The white light also indicates connection.
If it is solid, the switch is connected; if the it is ashing quickly, the switch is ready
to connect using the Easy Mode; if it is ashing slowly, the switch is ready
to connect using the AP Mode.
9
EN
DE
FR
ES
I T
8

Important Information
Made in China
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password duringthe Wi-Fi setup. Check
whether there are any Internet connection problems.
If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Name: Lumary Smart Floodlight
Power: 20W/30W
Size:152x125x28mm/209x168x30mm
Input voltage: 220-240VAC, 50/60 Hz
CCT: RGB+Warm White(2700K)
Luminous Flux: 1400lm/2400lm
CRI: Ra≥80
To reconnect to Wi-Fi, hold down the reset press switch on-o-on-o-on.
- Reset once (press switch on-o-on-o-on) to reach Easy Mode, indicated by
rapidly blinking white light. Refer to connect in Easy Mode.
- Reset again (press switch on-o-on-o-on) to reach AP Mode, indicated by
slowly blinking white light. Refer to connect in AP Mode.
Support:
If you encounter any issues, please contact us at:
[email protected]
[email protected]
9
EN
DE
FR
ES
I T

VOICE CONTROL GUIDE
Name and Control Each Device by Voice
Thank you for purchasing your Lumary smart home
product. Make sure your devices are already set up
using the Lumary App, then follow these steps.
EN
DE
FR
ES
I T
10

Voice Control Quick Guide for Google Assistant
To control your Lumary smart switch or surge
protectors, just say “OK Google”, and ask.
Make sure your devices are already set up
using the Lumary app.
Google Assistant
Things you can say* :
“Hey Google, turn on all the lights in my bedroom.”
“Hey Google, turn o the light.”
“Hey Google, set the bedroom light to orange.”
“Hey Google, turn o the coee machine.”
“Hey Google, set the living room to 50%.”
“Hey Google, dim porch light.”
*Some commands require compatible devices.
11
EN
DE
FR
ES
I T

Open the Google Home App
and go to Home Control
in the menu.
Tap the “+” button
1 2
3Choose “Lumary” in
the list of Home
Control partners.
Lumary
Lumary
4Authorize your account
with Google Assistant
using the username
and password from
your Lumary app.
Now your Google Home app
and Lumary devices are
linked!
You're now able to say
“OK Google” and control
your Lumary devices.
Note: Please select your region and country.
EN
DE
FR
ES
I T
12

At any time, go into the “Home Control” section of the Google Home
app to set nicknames and rooms for your devices.
You can rename your devices in the Lumary app, and Google
Assistant will refer to them by the same name.
So if you rename a smart bulb to “Living Room” or a nickname like
“Blossom”, then Google Assistant will use that same name later on.
You can always give it a nickname using the Google Home app as
well.
You can also assign switch to a specicroom, like “Bedroom” or
“Kitchen”.
Google Assistant will be able to control devices by room.
13
EN
DE
FR
ES
I T

Amazon Alexa
To control your Lumary smart switch or surge
protectors, just ask Alexa.
Make sure your devices are already set up
using the Lumary app.
Things you can say* :
“Alexa, discover my devices.”
“Alexa, turn on the bedroom light.”
“Alexa, set the bedroom light to orange.”
“Alexa, turn o the coee machine.”
“Alexa, set the living room to 50%.”
“Alexa, dim porch light.”
*Some commands require compatible devices.
EN
DE
FR
ES
I T
14

4. Click LINK.
5. Linked successfully, when add new device, it is no need to link again, just
discover new device in Alexa.
1. Log in to Lumary App, click your smart divice, click “ ” in top right corner.
2. Click Alexa in Third-party Control.
3. Sign in with your Alexa account.
There are 2 ways to enable "Lumary" Skill:
Way1:
15
EN
DE
FR
ES
I T

1
3
Lumary
Search for Lumary then
click Enable.
Authorize your account with Smart Home
Skills using the username and password
from your Lumary App.
Open the Alexa App and go to
Skills in the menu.
Way2:
2
Note: Please select your region and country.
EN
DE
FR
ES
I T
16

Choose “Discover Devices”. After a few seconds your Lumary devices will be
displayed under Smart Home in the Alexa app.
You can rename your devices in the Lumary app, and Alexa will
refer to them by the same name.
So if you rename a smart switch to “Living Room” or a
nickname like “Blossom”, then Alexa will use that same
nickname later on.
Alternatively, you create an Alexa group, like “Bedroom” or
“Downstairs”, and add the device to the group.
Alexa will recognize the group name in the Alexa app, or the
device name in the Lumary app.
More information is available at:
http://tinyurl.com/aexa-smart-home-groups
4
17
EN
DE
FR
ES
I T

Can’t connect?Need help?
Lumary support:
[email protected]
Visit us at: www.lumary.tech
HAVING AN EASY TALK TO US BEFORE YOU RETURN
THE PRODUCT WILL FIX A PROBLEM MORE QUICKLY
18

Lumary
LUMARY SMART
FLUTER RGBW
STARTANLEITUNG
19
EN
DE
FR
ES
I T