Lumena ProSolar Halomarka User manual

Full product range & more information: www.lumenalights.com
USER MANUAL
Halomarka Solar Light
THANK YOU FOR YOUR PURCHASE
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION / MAINTENANCE
WARNINGS
•If a fitting is found to be damaged, cease use immediately.
•The unit may get warm whilst on for a period of time.
•Always take care when installing your solar light, ensuring it is not a trip hazard.
•Fitting must be mounted to a solid surface.
•The Solar Light will not charge correctly if the panel is behind glass or artificial light is used.
CLEANING & MAINTENANCE:
Occasional cleaning and care are recommended for this product. Wipe with a soft, slightly damp cloth to remove any surface
dirt. To maintain efficiency, specifically clean the solar panel and LEDs on a regular basis. Also, keep the solar panel free of debris
and snow to prevent reduced battery life or malfunction. Do not use abrasive cleaners or a lot of water as this could damage
the fitting. Please refer to our website for more information on the best way to clean different materials.
RETURNS:
If purchased from a 3rd party, please contact your supplier. If purchased direct, contact us by phone or email:
Lumena Lights Ltd, Centre 33 Long March, Daventry, NN11 4NR Tel: [phone] Email: [e-mail]
Our full returns policy is available on our website.
Waste Electrical Products should not be disposed of with household waste. Please check with your local authority or contact us
for more information. Please recycle packaging whenever possible.
Producer Registration Numbers: WEE/KC3440XY /BPRN0843
SPECIFICATIONS
Pack Size: 2
Wattage: 0.5w each
Lamp: In-built LED
Colour: Daylight White (6500K) / Blue / Green
Lumen Output: 60 lm each
LED Life Expectancy: up to 50,000 hours
Max Illumination Time at Full Charge: up to 18 hours
Sensor: Light Sensor
Battery Type: NI-MH AAA 1800mAh
Battery Charge Time: 10 hours
Solar Panel: 0.6w Polycrystalline Silicon Laminated Plate (Taiwan Neo) –Lifespan up to 5 years
IP Rating: IP67
Materials: UV Protected Polycarbonate & ABS
Weight: 130g (approx.) each
Max. Walkover Weight: 150KG
Working Temperature: -25˚C ~ 65˚C
Mounting: Surface Mount / Ground Spike (included)
Installed Height: 23mm (6mm screw hole depth)
Functions: Dusk to Dawn
Included: 2 x Lights, 2 x Ground Spikes, 4 x Stainless Steel Screws & Plugs
✔✔
2 YEAR
GUARANTEE
see website for
more details
ISO9001:2015
116 mm
23 mm

Full product range & more information: www.lumenalights.com
HALOMARKA TECHNOLOGY:
The Halomarka is a highly efficient solar light with high capacity Lithium Ion batteries and a fast charging Polycrystalline solar
panel. This means that even on partially cloudy and rainy days, it will re-charge efficiently. The high battery capacity gives enough
power for up to 18 hours illumination when there is little light during the day. The subtle, yet effective glow is bright enough to
mark the edges of driveways and paths, making them safe to navigate at night.
INSTALLATION:
The HaloMarka is designed to be mounted on decking, a wooden post or a wall, either facing upwards or sideways.
Alternatively, the ground spike can be used to mount into soft ground, either in grass, borders or sand, both permanently and
temporarily with easy movement.
Location –It is important that the installation location is carefully considered, avoiding
shady areas. The best position is south facing, however the lights can work facing in
other directions, especially when in full sunshine. Ensure there are no other lights
which could interfere with the fittings, imitating daylight.
CHARGE FOR 2 DAYS BEFORE FIRST USE
SURFACE MOUNT
Stainless steel screws and wall plugs (supplied)
1. To surface mount, select the desired location and mark the 2 x mounting
holes.
2. Turn on the fitting by pressing the On Button on the back of the fitting,
firmly.
a. For wood mounting, screw the self-tapping screws directly into
the wood (do not overtighten).
b. For wall mounting –drill the marked holes to fit the M5 wall
plugs, then attach the fitting with the screws (do not overtighten).
Tip: If mounting onto decking, the fitting can be countersunk into the wood to create
more of a flush finish. Walkover up to 150KG.
MOUNT WITH GROUND SPIKE (supplied)
1. Pierce the extra two holes for the ground spike on the back of the fitting
(located under safety label)
2. Slot both sections of the ground spike together to make the 4-fin ground
spike
3. Line the 4 fins of the ground spike up with the holes on the back of the fitting
and push in firmly
4. Turn on the fitting by pressing the On Button on the back of the fitting,
firmly.
5. Dampen the ground and push the fitting into the ground carefully. If too
much resistance, dampen the ground again to soften. Do not force into
hard ground or this could damage the spike or the fitting.
To check if the fitting is turned on during daylight, cover the solar panel and the light will illuminate if on.
THE FITTING MUST BE TURNED ON TO CHARGE.