Luvion SUPREME CONNECT User manual

20
INSTRUCTION MANUAL
INDEX
INTRODUCTION 20
SAFETY INSTRUCTIONS 21
CONTENTS OF PACKAGE 21
OVERVIEW BRIDGE 22
COMPATIBLE MOBILE PLATFORMS 22
IMPORTANT TO KNOW 23
GETTING STARTED 23
IPHONE/IPAD ETHERNET SETUP 24
USING THE IPHONE/IPAD APP 26
LIVE VIEW
ZOOMING IN LIVE VIEW
VIEWING AND SHARING OF SNAPSHOTS
CHANGING THE BRIDGE PASSWORD
ADJUSTING VIDEO QUALITY OF CAMERA
ANDROID ETHERNET SETUP 30
GEBRUIK VAN ANDROID APP 32
LIVE VIEW
ZOOMING IN LIVE VIEW
VIEWING AND SHARING OF SNAPSHOTS
CHANGING THEBRIDGE PASSWORD
ADJUSTING VIDEO QUALITY OF CAMERA
TECHNICAL SPECIFICATIONS 36
TROUBLESHOOTING 36
INTRODUCTION
Thank you for purchasing the Luvion Supreme Connect Wi Bridge. Now you can see and hear your baby or even
more babies through your tablet or smartphone. Please retain your original dated sales receipt for your administra-
tion. For service and warranty issues you will always be asked for a copy of the receipt. For warranty issues you can
contact your Luvion dealer or your local Luvion distributor. More information can be found on www.luvion.com.
This user manual provides you with all information necessary for a safe and easy use of this baby monitor. Before
using the Luvion Supreme Connect Wi Bridge we ask you to thoroughly read this user manual. We ask for your
special attention for the safety instructions.
LUVION
Delft, The Netherlands
www. luvion.com

21
LUVION Premium Baby products
INSTRUCTION MANUAL
SAFETY INSTRUCTIONS
- Keep small parts away from children.
- This product is not a toy. Do not allow children to play with it.
- This product is not intended as a substitute for adult supervision.
- Only use the original supplied power chargers.
- Do not use this product within humid conditions or nearby water.
- Only use the product between 10°C en 35°C.
- Always keep the cords of the power adapters at least 1 meter away from the baby.
- Do not attempt to open the product. This should be done by qualied personnel.
CONTENTS OF PACKAGE
- 1 x WiFi charging Bridge
- 1 x Ethernet cable
Please check whether the package is complete.

22
OVERVIEW BRIDGE
COMPATIBLE MOBILE PLATFORMS
1. Connector for the Supreme Connect monitor. Place
your monitor on this connector to charge and enable
the wi- capabilities of your Supreme Connect.
2. Service Switch. Please make sure the switch is reading
‘INTERNET’. The ‘DIRECT’ mode is for service purposes
only.
3. Ethernet port. Connector for the ethernet cable.
4. Power Connector for the included Luvion adapter (5V)
5. Reset button, hold this button for 5 seconds in case
you’ve changed and lost the password of your WiFi
Bridge. Please be advised that after a reset, the WiFi
Bridge requires a full reinstallation to your WiFi Router.
6. QR Code, to be scanned during install.
7. UID, in case the QR code does not work during the
installation, this unique code can be entered manually.
The Luvion app supports the following platforms:
iPhone/iPad iOS 5.1 and above
Android 2.2 and above
NOTE: Luvion recommends a minimum upload speed of 512Kbps
An upload speed of 1Mbps or higher is recommended for best performance.
NOTE : Up to 3 users can be connected to the bridge at the same time.
1
2 3 4 5
76

23
LUVION Premium Baby products
IMPORTANT TO KNOW
GETTING STARTED
When no one is connected using a smartphone/tablet, you may use all monitor functions except:
• The handheld monitor cannot be turned o.
• AV output to a TV is disabled.
When someone is connected to the cameras using a smartphone or tablet, you will not be able to use the
buttons or menus on the handheld monitor.
The icon appears on the handheld monitor when someone is connected using the Luvion app.
If Recording is in progress when someone connects remotely, the recording will be stopped and it
does not resume when they disconnect.
While viewing on a smartphone or tablet, you may press to take a snapshot with the device’s camera
if you wish to record an event.
1. Connect the bridge power adapter to the bridge. Connect the other end to a power outlet.
2. Connect the bridge to your router using an Ethernet cable (included). Please check whether the Service
Switch reads ‘INTERNET’. The ‘DIRECT’ mode is only intended for service purposes.

24
3. Place the monitor onto the power/network connector on the bridge. Use the stand-up guides to help place
the monitor. The monitor will charge when connected to the bridge. It takes 5 hours to fully charge a battery.
On your smartphone or tablet, download our Luvion App for free from the App Store (iPhone®/iPad®) or the
Google Play Store (Android™).
IPHONE/IPAD ETHERNET SETUP
1
2
Complete chapter‘Getting Started’ and launch the Luvion App.
Go to ‘Add Device’- Enter the UID code for the bridge in
one of the following ways:
Option A: Tap QRCode and scan the QR code (the black and
white square found on the side of the bridge).
Option B: Tap Add and manually enter the UID printed below
the QR code on the side of the bridge. You may need to do this
if your device does not have a camera (for example, 1st generation iPads).
Option C: If your device is on the same network as
the bridge, it will detect the bridge UID. Tap the UID to
enter.

25
LUVION Premium Baby products
Enter a name for your Supreme Connect. Enter
the default password‘000000’(six times zero). Tap
‘Save’.
Your Supreme Connect Bridge should now show
up in the ‘Device List’ with an ‘Online’ indication.
The app will connect to your monitor and stream
live video from your cameras.
To connect the bridge to your Wi-Fi network, see below.
3
4
5
NOTE: The WiFi Bridge should always be connected with the router.

26
USING LIVE VIEW (IPHONE/IPAD)
You can view your camera in either portrait
or landscape mode.
NOTE: The controls above are only shown
in portrait mode.
ZOOMING IN LIVE VIEW
With Live View you may control the camera,
allowing you to look around and zoom in/
out. This is done with the standard ‘gestures’
of your phone Please look below for a short
explanation.
Zooming in: Pinch and make an outward
moving gesture with the index nger
and the thumb. NOTE: You cannot move
around freely with the camera when the
cam view is zoomed in. Please zoom out
completely to regain control over the
movements of the camera.
Zooming out: Place your thumb and index
nger on the screen and make an inward,
pinching motion to zoom out.
Navigation: When zoomed in with Live
View, press and drag to move the zoom
area. When zoomed all the way out, press
and drag to control the camera. Please
note that there might be a slight delay in
movement when controlling the camera.

27
LUVION Premium Baby products
VIEWING AND SHARING SNAPSHOTS
You can take snapshots of live video from
your cameras by pressing
You can view or share
snapshots using the app.
To view your snapshot, tap the landscape
icon.
You are now viewing the photo gallery. To
open and share a snapshot, tap on it. To
E-mail, Delete or Save the photo in the iOS
gallery, press:
You have now the option to delete the
Photo (‘Delete Photo’), e-mail it (‘E-mail
Photo’) or to save it (‘Save Photo’) within the
iOS photo gallery.
NOTE: Your email settings must be congured to
share the snapshot using email. See the User Guide
for your iPhone®/iPad® for details.

28
CHANGING THE BRIDGE PASSWORD
The default password is 000000 (Six times zero). It is recommended to create your own password to ensure
that no one may access your video.
To change the password:
Open the Device List screen in Luvion. Press ‘Back’
if you are currently connected to a camera.
Tap the ‘ ‘ button next to the device, then
select ‘Advanced Setting’
Druk vervolgens op ‘Change Password’
You are now in the ‘Change Password’’ menu.
Enter the old password (eg ‘000000’), your new
password and your new password once more for
conrmation.
Conrm these new settings by tapping‘OK’. Press
‘Back’two times to return to the Device List.
Tap the Device to connect.
If you forget your password, press and hold the Reset
button on the bridge for 5 seconds, it will reset using
the default ‘000000’ password.
1
2
3
4
5
7
6

29
LUVION Premium Baby products
CHANGING THE VIDEO QUALITY
The video quality can be increased for fast Internet connections or decreased to improve the
video performance. If the video is choppy or slow, it is recommended to reduce the video quality setting.
Open the Device List screen in the Luvion app.
Press ‘Back’ if you are currently connected to a
camera.
Tap the ‘ ‘ button next to the device to go the
device settings.
Tap ‘Advanced Setting’
Select ‘Video Quality’
You are now in the ‘Video Quality’ menu.
Now you may select the desire video quality.
Tap ‘Back’ three times to return to the Device List.
1
2
3
4
5
6

30
ANDROID ETHERNET SETUP
1
2
3
Start the Luvion App
Tap ‘Click here to add device’
Enter the UID code for the bridge in one of the following ways:
A. Tap Scan and scan the QR code on the
side of the bridge using your device’s camera. You
may be prompted to select the app that will be
used to scan the QR code. Select ‘Google’ and
press ‘Always to continue’.
B: If your device is on the same network as the
bridge, tap ‘Search’ to detect the bridge UID. Tap
the UID to enter.
C: Tap UID and manually enter the UID printed on
the side of the bridge. You may need to do this if your
device does not have a camera.
Enter the default password 000000 (six times
zero) and enter a name for your
monitor.
4

31
LUVION Premium Baby products
5The bridge will show up in your Device List
with an ‘Online’ status, select your device to
connect. The app will now connect to your system
and stream live video from your cameras.

32
USING LIVE VIEW ANDROID
You can view your camera in either portrait
or landscape mode.
ZOOMING IN LIVE VIEW
With Live View you may control the camera,
allowing you to look around and zoom in/
out. This is done with the standard ‘gestures’
of your phone Please look below for a short
explanation.
Zooming in: Pinch and make an outward
moving gesture with the index nger
and the thumb. NOTE: You cannot move
around freely with the camera when the
cam view is zoomed in. Please zoom out
completely to regain control over the
movements of the camera.
Zooming out: Place your thumb and index
nger on the screen and make an inward,
pinching motion to zoom out.
Navigation: When zoomed in with Live
View, press and drag to move the zoom
area. When zoomed all the way out, press
and drag to control the camera. Please
note that there might be a slight delay in
movement when controlling the camera.

33
LUVION Premium Baby products
VIEWING AND SHARING SNAPSHOTS
You can take snapshots o f live video from
your cameras by pressing the cam Icon. You
can view or share snapshots .
Snapshots are saved in .jpg format. They are
saved to the /DCIM/Luvion folder on your
device’s memory.
To view snapshots:
In order to view snapshots, use the
landscape icon within Live
View to display the snapshot
gallery.
When you have entered the snapshot
gallery, you may tap a snapshot to view it
full screen.
Next, you may choose the
‘options’ icon to select an
application through which you
would like to share the snapshot.

34
CHANGING THE BRIDGE PASSWORD
The default password is 000000 (six times zero). It is recommended to create your own password to ensure
that no one may access your video.
To change the password:
Open the Device List screen. Go back if you are
currently connected to a camera.
Tap ‘ ‘ next to the bridge to access the device
options.
Tap ‘Edit Device’
Select ‘Advanced Setting’
Select ‘Change Password’’ .
Enter the old password (eg ‘000000’), your new
password and your new password once more for
conrmation.
Record your password:
Tap ‘OK’ twice to return to the Device List.
Now select your device in order to connect.
If you forget your password, press and hold the
Reset button on the bridge for 5 seconds, it will
reset using the default ‘000000’ password.
1
2
3
4
5
7
6

35
LUVION Premium Baby products
CHANGING THE VIDEO QUALITY
The video quality can be increased for fast Internet connections or decreased to improve the video
performance. If the video is choppy or slow, it is recommended to reduce the video quality setting.
Changing the video qualiity:
Open the Device List screen in Luvion. Press back
if you are currently connected to a camera.
Tap ‘ ‘ next to the bridge.
Select ‘Edit Device’
Go to ‘Advanced’
Tap the eld next to‘Video Quality’ , then select
the desired video quality
Tap OK to return to the Device List.
1
2
3
4
5
6

36
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
Technical Specications
Wi-Fi IEEE 802.11 b/g/n
Wi-Fi Encryption WEP / WPA / WPA2/ WPA2 PSK
Wi-Fi Frequency 2.4GHz
Ethernet 10 / 100 M Ethernet port
DHCP DHCP Client / Server
Mobile Apps iOS (5.1+) / Android (2.2+)
Adapter 5V DC 1.5A
Operation Temperature 0 - 40 C / 32 - 104 F
Problem Solution
Cannot connect to the monitor on
my smartphone or tablet
• Monitor is not placed on the bridge. The monitor must be
on the bridge to enable remote connectivity.
• Make sure the bridge is connected to power using the
bridge power adapter. The bridgecannot use the power
adapter for the monitor or cameras.
• Ethernet cable not connected or Wi-Fi network not set up.
Connect an Ethernet cable to the bridge and connect the
other end to your router. For details, see “iPhone®/iPad®
Ethernet Setup” or“Android Ethernet Setup”
• Ensure the switch on the back of the bridge is set to
INTERNET mode. DIRECT mode is for service use only. Dis-
connect and reconnect the power adapter after switching
to INTERNET mode.
I have forgotten the password to
the bridge
• Press and hold the Reset button on the bridge with a
paper clip or other thin object for 5 seconds to reset the
bridge to the default password, 000000. You will need
to re-enter your Wi-Fi network in the bridge, as this will
cause the bridge to forget any congured Wi-Fi networks.
Cannot connect the bridge to my
Wi-Fi network
• Double-check the password for your Wi-Fi network.
• Make sure the bridge is in range of your router.
• If there are any spaces in your network name (SSID), you
must change your network name to omit any spaces.
I do not see Live Video controls on
the screen in the iPhone®/iPad® app
• Controls are only shown when the device is held in
portrait mode.

37
LUVION Premium Baby products

Luvion Premium Babyproducts
Delft, The Netherlands
Visit us at:
www. Luvion.com