Luvox F100 Technical manual

LUVOX
LCD MONITORS
ALL-IN-ONE SYSTEMS
INFORMATION GUIDE
REVISION 0.08 - JV April 27, 2010
- 1 -
M nu
1. Important Information ········································Pag .2
Important Saf ty Instructions······························ Pag .2
Contact Information ···········································Pag .2
2. Introduction ·······················································Pag .3
D scription ·······················································Pag .3
Standard Packag Cont nt ··································Pag .3
Standard Product F atur s ··································Pag .4
Cl aning ···························································Pag .5
Pr cautions ·······················································Pag .5
3. LCD monitor Control Functions ·····························Pag .6
K y functions ····················································Pag .6
OSD functions ···················································Pag .7
OSD ov rvi w ···················································Pag .10
4. LCD Monitor S tup ··············································Pag .11
Conn ctor layout ···············································Pag .11
Driv r installation ··············································Pag .12
Touch Alignm nt (Calibration) ·····························Pag .13
5. LCD Monitor Product Sp cifications ························Pag .14
6. All-In-On syst ms ··············································Pag .16
D scription ·······················································Pag .16
Conn ctor layout ···············································Pag .17
Acc ssing main board ar a··································Pag .18
AIO (d fault) BIOS s ttings·································Pag .19
Storag s tups ··················································Pag .23
7. LUVOX Pan l Mount Installation·····························Pag .25
S curing with Front Mount Brack ts ·····················Pag .25
S curing with Sid Skirt Bolts······························Pag .26
8. LUVOX optional f atur s ·······································Pag .32
ProLin ·····························································Pag .32
IP65 front ·························································Pag .34
Rack Mount B z l ··············································Pag .40
R ar Mount Brack ts ··········································Pag .43
9. LUVOX Product Id ntification·································Pag .50
10. LUVOX S rvic Information ·································Pag .53
App ndix: LUVOX Dim nsional Drawings ····················Pag .54

- 2 -
Important Information
Important Safety Instructions
Caution: To pr v nt l ctric shock, pl as do not r mov any
cov rs or any int rnal compon nts. R f r to a qualifi d t chnician
for s rvic .
Caution: Unplug th d vic from th pow r outl t b for
cl aning. Us a soft damp cloth.
Caution: Pl as follow th national guid lin s for unit disposal.
Contact Information:
DOBIT NV - B lgium
TEL: [phone]
FAX: [phone]
Industri laan, 6
B-2250 Ol n
B lgium
DOBIT BV - Holland
TEL: [phone]
FAX: [phone]
St nov nw g, 5
5708 HN H lmond
Th N th rlands
www.dobit.com
sal [e-mail]
[email protected]
- 3 -
Introduction
Description
Congratulations on th purchas of your n w LUVOX d vic . Each
LUVOX prof ssional LCD monitor or All-In-On syst m f atur s a
color activ matrix thin-film-transistor (TFT) liquid crystal display
to provid sup rior display p rformanc with r solutions from
VGA 640x480 to SXGA 1280X1024. Each LUVOX d vic can b
optionally quipp d with a wid rang of ELO touch t chnologi s.
Th LUVOX product rang r pr s nts a family of all-st l chassis,
rugg d d sign, industrial LCD flat pan l d vic s.
Standard LUVOX Package Content
Includ d with a standard LUVOX LCD monitor:
•LUVOX LCD monitor
•15pin D-sub signal cabl (VGA cabl )
•Composit vid o & audio cabl
•S-vid o cabl
•AC pow r cabl
•Pow r adapt r (40W minimum)
•USB and/or RS232 touch int rfac cabl (optional)
•ELO driv rs CD-ROM (optional)
•Front mount brack ts
•Scr w s t (4xM4x30, 4xM4x12, 8xM3x6)
Includ d with a standard LUVOX all-in-on syst m:
•LUVOX All-in-on syst m
•AC pow r cabl
•Pow r adapt r (60W minimum)
•Driv r CD-ROM(s)
•Front mount brack ts
•Scr w s t (4xM4x30, 4xM4x12, 8xM3x6)
•Additional mod l d p nd nt acc ssori s

- 4 -
Standard Product Features
Standard LUVOX LCD monitor
•16M High contrast colors up to SXGA 1280X1024.
•Compatibl with VESA standard and DDC1/DDC2B
•VGA, audio, composit vid o, S-Vid o signal inputs
•OSD and auto-color & -tracking control
•Display Pow r Manag m nt Signaling (VESA PDMS)
•Touch scr n int rfac (optional)
•VESA 75/100mm Mounting
•Int grat d 4 Watt St r o amplifi r for kiosk purpos
•All-st l rugg d d sign
standard LUVOX All-In-On syst m
•16M High contrast colors up to SXGA 1280X1024
•Int grat d Sock t 478 industrial MINI-ITX board
•Int l P ntium
®
M or C l ron
®
M bas d platform
•400MHz FSB
•DDR SDRAM 200/266/333 MAX 1GB
•10/100 Bas -TX Eth rn t, 4x USB 2.0, AC97
•2x RS232, 1x Parall l port, 1x 1394, PS/2, Audio
•Typ II Tru IDE Mod CF Sock t(s) (optional)
•Touch scr n op ration
•VESA 75/100mm Mounting
•All-st l rugg d d sign
Mor d tail d information about th int grat d MINI-ITX
mb dd d board can b found in th installation guid which is
d liv r d as docum ntation with your LUVOX all-in-on syst m.
Mor d tail d information about ELO and th optionally int grat d
touch scr n t chnologi s can b found on th ELO w bsit :
www. lotouch.com
- 5 -
Cleaning
•Cl an with a soft damp cloth
•Us non-ammonia glass cl an rs
Precautions
•R ad instructions car fully
•Op ning or r moving cov rs may xpos you to dang rous
shock hazards or oth r risks.
•Handl with car wh n transporting and sav packaging
•Do not block v nt hol s. Do not ins rt sharp obj cts or spill
liquid into th d vic . Th y may caus accid ntal fir , l ctric
shock, or failur .
•Do not att mpt to s rvic this product yours lf.
•Do not r mov th ground prong from th adapt r or th AC
pow r plug.
•Do not disconn ct any cabl s from a d vic in op ration
•Mak sur pow r sourc voltag s ar corr ct wh n not using
th standard pow r adapt rs.
•Plac th d vic in a v ntilat d plac .
•Ensur that suffici nt spac is availabl around th d vic to
provid air circulation.
•K p th monitor away from xtr m h at, cold, humid or
dusty nvironm nts. Avoid dir ct sunlight and quipm nt that
g n rat magn tic fi lds.
•If th quipm nt is not us d for a long tim , disconn ct it
from th pow r sourc .

- 6 -
LCD Monitor Control Functions
(Chapt r appli s to standard LUVOX LCD MONITORS Only)
Each LUVOX LCD monitor has an int rnal microproc ssor
d dicat d to control display imag . This microproc ssor has th
capability to adjust th monitor to th sourc it is attach d to.
This auto-adjustm nt is don wh n th unit is first install d,
conn ct d and pow r d up, and ach tim th vid o input sourc
is chang d. Wh n th display imag is not satisfying, th us r can
adjust all s ttings by nt ring th OSD (On-Scr n-Display) m nu
functions with th control k ys locat d on th backsid of th
monitor.
LUVOX F100 & F120 LCD monitor s ri s control k ys:
(m nu – s l ct – pow r – down – up)
LUVOX F150, F170 & F190 LCD monitor s ri s control k ys:
(pow r – m nu – s l ct – down – up)
Key functions
1. Pr ss POWER to turn on th monitor (pow r LED indicat s
gr n), pr ss POWER again to turn it off.
2. Pr ss SELECT to s l ct input sourc :
VGA <s l ct> Composit Vid o <s l ct> S-Vid o
(pow r LED indicat s r d for invalid signal sourc s)
3. Pr ss UP to run th AUTO-COLOR balanc function
4. Pr ss DOWN to run th AUTO-ADJUST imag function
(AUTO- functions ar only possibl in VGA mod )
- 7 -
OSD On-Screen-Display) function
1. Pr ss MENU to activat th OSD m nu
2. Pr ss UP / DOWN to navigat b tw n th primary
functions.
3. Pr ss SELECT to nt r on of th primary functions
4. Pr ss MENU to r turn on l v l in th m nu
5. Pr ss MENU in th main m nu to xit OSD and sav all
s ttings in m mory.
Color
1. In th main m nu s l ct COLOR.
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN
4. r turn to pr vious l v l with MENU
Brightn ss: Adjust int nsity l v l of th imag
Contrast: Adjust bright / dark l v l diff r nc
Color Adjust: Adjust color of th scr n’s imag
Color T mp: 9300 and 6500 t mp ratur s tting
& RGB adjustabl us r t mp ratur
Image Setting 2
nd
function in VGA mode)
1. In th main m nu s l ct IMAGE SETTING.
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN
4. r turn to pr vious l v l with MENU
Clock: Adjust horizontal siz of th imag
Phas : Adjust focus of th imag
Sharpn ss: Adjust clarity of th imag
Video 2
nd
function in video mode)
1. In th main m nu s l ct VIDEO.
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN

- 8 -
4. r turn to pr vious l v l with MENU
Hu : Adjusts NTSC phas (NTSC only)
Saturation: Adjusts color l v l (NTSC & PAL)
Sharpn ss: Calibrat imag focus (NTSC & PAL)
Position
1. In th main m nu s l ct POSITION
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN
4. r turn to pr vious l v l with MENU
H. Position: Adjust horizontal position of th imag
V. Position: Adjust v rtical position of th imag
(H. Position & V. Position hav no ff ct in vid o mod )
OSD Menu
1. In th main m nu s l ct OSD MENU
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN
4. r turn to pr vious l v l with MENU
OSD H. Pos: Adjust th horizontal position of OSD
OSD V. Pos: Adjust th v rtical position of OSD
OSD Tim r: Adjust OSD closing tim wh n no actions
Language
1. In th main m nu s l ct LANGUAGE
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN
4. r turn to pr vious l v l with MENU
Languag : S l ct d sir d OSD languag
- 9 -
Miscellaneous
1. In th main m nu s l ct MISCELANNEOUS
2. Pr ss UP / DOWN to navigat
3. Pr ss SELECT to adjust valu with UP / DOWN
4. r turn to pr vious l v l with MENU
Signal Sourc : S l ct d fault input signal sourc
R s t: R turns all controls to factory s ttings
Audio: Adjust volum of int rnal amplifi r
Mut : Toggl int rnal amplifi r ON/OFF
Exit
Exit OSD m nu
(Pr ss SELECT only onc . Oth rwis th display mod will b
switch d to th n xt input sourc )

- 10 -
OSD Overview
- 11 -
LCD Monitor S tup
(Chapt r appli s to standard LUVOX LCD MONITORS Only)
connector layout standard LUVOX LCD Monitor)
1. DC POWER INPUT: DC 12V jack (c nt r pin +)
2. VGA: This can b conn ct d with th D-Sub 15-pin conn ctor
of any analog VGA RGB sourc
3. S-VIDEO IN: This can b conn ct d to th S-Vid o conn ctor
of any vid o sourc .
4. VIDEO IN: This can b conn ct d to th RCA conn ctor of
any vid o sourc .
5. RCA audio LEFT: l ft RCA audio input can b conn ct d to
any RCA sound sourc
6. RCA audio RIGHT: right RCA audio input can b conn ct d to
any RCA sound sourc
7. LINE IN: this input can b conn ct d to any st r o sourc
( .g. a PC sound card).
8. AUDIO OUT: this output can b dir ctly conn ct d to audio
sp ak rs or h adphon s
9. USB or RS232 port (for touch monitors only): ports to b
conn ct d to your PC for touch functionality.
NOTE: LUVOX prof ssional monitors hav a broad rang of
optional f atur s availabl . This m ans your monitor could hav
xtra conn ctors availabl for diff r nt purpos .

- 12 -
Driver installation
Each LUVOX d vic can b quipp d with an ELO touch scr n.
Th 4 ELO touch t chnologi s adapt d in LUVOX d vic s ar :
•ACCUTOUCH (5-wir r sistiv )
•CARROLLTOUCH (Infrar d)
•INTELLITOUCH (Surfac acoustic wav )
•SURFACE CAPACITVE (only produc d on proj ct basis)
Visit th ELOTOUCH corporat w bsit for mor information about
ach availabl t chnology.
www. lotouch.com/T chnologi s/d fault.asp
Each LUVOX LCD monitor pow r d with an ELO touch scr n
com s with an ELO driv r CD-ROM in th acc ssory box. You will
n d to install this driv r CD-ROM b for th monitor b com s
fully functional. Pl as ins rt th CD-ROM and follow th
instructions on th scr n. Aft r you hav install d th driv r, you
will b automatically ask d to calibrat your monitor. Aft rwards,
your monitor is r ady to us .
If th driv r CD-ROM is lost, damag d or out of dat (Cfr us with
WINDOWS VISTA), you can download th lat st driv r v rsion
from th ELOTOUCH w bsit . S l ct th corr ct driv r bas d on
your op rating syst m and touch t chnology.
www. lotouch.com/Support/Downloads/dnld.asp
- 13 -
Touch Alignment Calibration)
Th touch r spons must b align d to th vid o imag (this is
call d calibration). Normally this is don wh n th touch driv rs
ar initially install d. But in som conditions r -calibration may b
n d d, for xampl aft r swapping or r placing monitors on th
sam machin .
On r gular Windows syst ms th Alignm nt/Calibration utility is
run from th Control Pan l. This calibration proc dur is also valid
on a LUVOX All-In-On syst m.
•Click th Start button.
•S l ct S ttings, th n Control Pan l (on lat r op rating
syst ms th S ttings st p is omitt d)
•Op n th Elo appl t by doubl -clicking th Elo icon.
•On Windows XP it may b n c ssary to click th Show Classic
Vi w button to s th Elo icon.
•Th Alignm nt/Calibration button is always on th G n ral tab
of th Elo Control Pan l tab s t
•Click th button, touch targ t in th upp r l ft corn r.
•Th targ t will r app ar in th low r right corn r
•Touch th upp r right targ t.
•Th n xt scr n is an alignm nt ch ck. Touch various
positions and ch ck th cursor mov m nt.
•Clicking th r do arrow icon will display th targ ts again to
r run th alignm nt routin .
•You must click th Acc pt button to stor th n w alignm nt
points.
NOTE: You may find oth r int r sting f atur s in th ELO control
pan l r garding sounds, right mous click mulation, tc…

- 14 -
LCD Monitor Sp cifications
Specification/Model Standard F100 Standard F120
Pan l Typ VGA TFT SVGA TFT
R comm nd d R s. 640x480 800x600
Scr n Diagonal Siz 10.4 12.1
Display Colors 6bit 262K colors 6bit 262K colors
Brightn ss (Cd/m²) 400 400
Contrast ratio (X : 1) 300 500
Vi wing angl L/R/U/D 60/60/40/50 60/60/40/55
Display Ar a (mm) 211.2x158.4 246.0x184.5
Input Signals VGA, Comp & S-
vid o
VGA, Comp & S-
vid o
Pow r Consumption 30 Watt Max 36 Watt Max
Op rating t mp. 0-50°C 0-50°C
Storag t mp. -20°C to 65°C -20°C to 65°C
Op rating humidity 10-90% ** 10-90% **
Dim nsion (Standard) 289x236.4x43 319.5x260x45
W ight (kg) 2.5 – 4 3.2 – 4.6
** NOTE: Non Cond nsing
- 15 -
Standard F150 Standard F170 Standard F190
XVGA TFT SXVGA TFT SXVGA TFT
1024x768 1280x1024 1280x1024
15.0 17.0 19.0
16M Colors 16M Colors 16M Colors
300 300 300
550 800 800
80/80/80/80 80/80/70/70 89/89/80/80
304.1x228.1 337.9x270.3 376.3x301
VGA, Comp & S-
vid o
VGA, Comp & S-
vid o
VGA, Comp & S-
vid o
40 Watt Max 40 Watt Max 40 Watt Max
0-50°C 0-50°C 0-50°C
-20°C to 65°C -20°C to 65°C -20°C to 65°C
10-90% ** 10-90% ** 10-90% **
382x302x56 411x348x60 460x392x64.6
4.2 – 5.9 5.5 – 7.2 5.7 - 8.5
** NOTE: Non Cond nsing

- 16 -
LUVOX AIO (All-In-On ) syst ms
Description
LUVOX mod ls F150, F170 and F190 can b quipp d with a
MINI-ITX mb dd d industrial grad moth rboard. This cr at s
major advantag s compar d with traditional s tups of PC and
monitors conn ct d ov r VGA lik small r application d signs and
r duc d hardwar costs. AIO imag quality is also way abov that
of a traditional VGA s tup b caus th LCD compon nt insid th
d vic int rfacing with th moth rboard on a digital l v l which
cr at s th cl ar st imag possibl .
Anoth r advantag sp cific for LUVOX AIO syst ms is th ir broad
sp ctrum of possibl ELO touch scr n t chnologi s. ELO touch
scr ns ar availabl for a wid vari ty of us s, from point of sal
to kiosks, m dical and industrial quipm nt, and gaming syst ms.
ELO is th global standard in high- nd quality touch compon nts
for ov r 30 y ars and includ s r liability, accuracy, clarity and
r sponsiv n ss.
- 17 -
Connector Layout standard LUVOX AIO system)
(Chapt r appli s to standard LUVOX All-In-On syst ms only)
1. POWER ON toggl switch (conn ct d to main board)
2. DC POWER jack (C nt r pin +)
3. RS232 port - COM2
4. AUDIO (st r o lin -out)
5. PS/2 K yboard & mous
6. PARALLEL port LPT1
7. RS232 port – COM1
8. VGA out (For Ind p nd nt 2
nd
VGA monitor)
9. USB 2.0 (4x)
10. ETHERNET
11. FIREWIRE
NOTE: LUVOX AIO syst ms hav a broad rang of optional
f atur s availabl and ar fr qu ntly build in proj ct bas d
custom s ri s. This m ans your monitor could hav xtra
conn ctors availabl for diff r nt purpos .

- 18 -
Accessing main-board area
Although a LUVOX AIO syst m contains no us r s rvic abl parts
insid , it may b d sir d for us rs to hav acc ss to th main
board ar a of th d vic to:
•Expand random acc ss m mory
•R s t BIOS s ttings *
•R plac Lithium batt ry c lls
•Acc ss int rnal CF slot
•…
1. Pow r down your LUVOX AIO d vic
2. Disconn ct all pow r cabling
3. R mov th 8 whit M3 scr ws which s cur th cov r
(black scr ws ar n v r us r s rvic abl )
4. R mov cov r and disconn ct th optional xt rnal Compact
Flash slots wh n ought n c ssary and pr s nt**.
5. Carry out th d sir d s rvic
(Consult th main board’s installation guid for sp cific
information about th main board)
6. R plac cov r in r v rs ord r
*NOTE: Wh n a BIOS r s t is carri d out , th syst m’s LCD
pan l has to b r activat d by using an xt rnal VGA monitor
(s n xt chapt r)
**NOTE: Mak sur you r -conn ct th IDE cabl corr ct. Th
r d dg of th IDE cabl must match with PIN 1 of th CF
sock t.
- 19 -
LUVOX AIO Default BIOS settings
It is important to know what to und rstand und r d fault BIOS
s ttings. Wh n th syst m’s BIOS is r s t, th syst m will r turn
to th d fault s tting according th main board. M anwhil
LUVOX d fault BIOS s ttings don during production of your
LUVOX AIO d viat from th s .
Th BIOS s ttings carri d out during production ar now bri fly
summariz d. It may h lp you to r -initializ your syst m in cas
this n c ssity would v r occur.
(Consult th main board’s installation guid for mor sp cific
information about th main board’s BIOS)
Fig 1.) Pr ss DEL during startup to nt r th main BIOS scr n