Luxafor CO2 Monitor User manual
Luxafor CO₂ Monitor
User Manual
Contact us at support@luxafor.com or call +371 27755544
Luxafor CO₂ Monitor Package Contents
Product Specifications
Contact us at support@luxafor.com or call +371 27755544
1x Luxafor CO₂ Monitor
1x USB Data Cable
0.5 m (20”)
Dimensions:
52 x 52 x 27 mm (2.05 x 2.05 x 1.06”)
Weight:
55g (1.94oz)
Measurements:
CO₂ (carbon dioxide), temperature, relative
humidity
Operating
environment:
Indoor use
Measurement range:
CO₂ (ppm)
0 to 5000
temperature (°C)
0 to 60
temperature (°F)
32 to 140
relative humidity (% rH)
0 to 100
Measurement
accuracy:
CO₂ reading (ppm)
Accuracy at 25 C and 1013
mbar (77 F and 14.69 psi)
0...2000 ppm < ± (50 + 2
% of the measured
value)
Contact us at support@luxafor.com or call +371 27755544
0...5000 ppm < ± (50 + 3
% of the measured
value)
temperature reading (°C)
±0.5 (15 to 40 °C)
±1.0 (0 to 60 °C)
relative humidity (% rH)
±3.5 (20 to 80% rH)
±5.0 (0 to 100% rH)
Sensor:
Nondispersive infrared (NDIR) sensor for
measuring CO₂
Calibration
interval:
5 years
Data update rate:
5 minutes
Power options:
USB Powered / 1200 mAh Li-ion battery
Battery life:
Up to 3 weeks
Operating
temperature:
0°C to 50°C (32°F to 122°F)
Operating
humidity:
0% to 85% non-condensing
E-ink display:
Resolution: 200 x 200
Viewing angle: >170°
Display color:
Black & white
Notification light:
1 x RGB LED
Sound alarm:
Buzzer
Construction:
ABS
Charging Instructions
1. Prior to use, charge the Luxafor CO₂ Monitor by connecting the included charging
cable into a USB power outlet, such as a USB charger, and plug the other end into the
Luxafor CO₂ Monitor’s micro USB charging port. Charging time approx. 3 - 5h. When
charging is complete, the Lightning bolt symbol will disappear and be replaced by the
linear scale.
2. The Luxafor CO₂ Monitor will turn on immediately when the charging has begun. A
Lightning bolt icon will indicate that the unit is being charged.
3. You can use the Luxafor CO₂ Monitor unit safely during the charging process - it will
operate normally.
Turning the Device On and Off
To turn on the device, short press the button at the back of Luxafor CO₂ Monitor. To
turn off the device, long-press the button at the back of the unit and hold for approx. 6
seconds. Release when a Red light appears in the LED indicator window below the
E-ink screen and the device will turn off automatically.
Button Functionality
There is a button at the back of Luxafor CO₂ Monitor. Follow the instructions below to
access various functionality controlled by this button:
Contact us at support@luxafor.com or call +371 27755544
Turn the device on
Short press 1x
Refresh data
Short press 1x
Stop the alarm sounding
Short press 1x
Turn alarm mode on/ off
Press and hold for 3 seconds (indicated
by RED LED and icon on the screen)
Switch between F/C
temperature readings
Short press 2x
Turn off the device
Press and hold for 6 seconds
Regular mode
Regular mode is the default mode that is active when you first turn on the device. It
displays the CO₂ level, temperature, humidity, and battery level on the screen in
real-time without any alarms.
Alarm mode
The alarm mode is activated and deactivated by holding a button for 3 seconds. When
this mode is activated, a RED LED light will be visible for 5 seconds and a small alarm
icon will show up.
When your CO₂ level exceeds 1000 ppm, the device will start buzzing every 1 minute
and the LED will blink red for 3 seconds every 1 minute.
Contact us at support@luxafor.com or call +371 27755544
When your CO₂ level exceeds 1200 ppm, the device will sound the buzzing alarm
every 5 seconds and the LED will blink red constantly. It’s an indicator that the room
needs ventilation to remove any aerosols from the air as soon as possible.
You can stop the alarm by pressing the button 1x and it will be deactivated and will
auto-activate again when the CO2 level drops below 800 ppm, if not turned off.
Reading the Measurements on the Screen
1. CO₂ concentration level in ppm (parts per million)
2. CO₂ threshold level indication with the arrow pointing to a certain color of the
scale:
• Green represents normal level (below 1000 ppm)
• Yellow represents average level (1000 to 1200 ppm)
• Orange represents a high level (1200 to 1400 ppm)
• Red represents an extremely high level (above 1400 ppm)
3. Relative humidity of the air (RH%)
4. Battery level
5. The temperature of the air in Celsius or Fahrenheit (refer to “Button Functionality”
Contact us at support@luxafor.com or call +371 27755544
of this manual for instructions on switching between F/C)
6. Alarm icon (visible only when the Alarm mode is active)
CO 2 Measurement Performance
The CO2 measurement is based on the dual wavelength NDIR principle,
which compensates for aging effects, is highly insensitive to pollution and
offers outstanding long-term stability. A multiple point CO2 and temperature
factory adjustment procedure leads to excellent CO2 measurement
accuracy over the entire temperature working range.
If you have any questions, please don't hesitate to contact us at support@luxafor.com
or call +371 27755544.
Send us a full report of the issue, explaining the details of the situation, when the issue
first occurred, and if the issue persists throughout the troubleshooting process. We
strongly recommend adding pictures/ videos to better explain the situation.
Contact us at support@luxafor.com or call +371 27755544
Table of contents
Popular Measuring Instrument manuals by other brands
Berkeley Varitronics Systems
Berkeley Varitronics Systems Butterfly manual
Mannesmann
Mannesmann 99995 instruction manual
Protean Instrument
Protean Instrument MPC-1000 series user manual
multicomp pro
multicomp pro MP001186 instruction manual
Fun Generation
Fun Generation RTA-31 user manual
Chauvin Arnoux
Chauvin Arnoux C.A 6541 user manual
