LuxenHome WHIF415 User manual

Thank you for purchasing this Winsome House product. This product has been manufactured with
the highest standards of safety and quality.
Product Name:
SKU #:
Walnut finish wine cabinet
WHIF415
A
B
C
Back Panel -- 1pc
Front Panel -- 1pc
Side Panel -- 2pcs
COMPONENT PARTS
D
Shelf Panel -- 2pcs
F
G
H
I
Shelf Panel -- 1pc
Division Panel -- 1pc
Division Panel -- 1pc
HARDWARES REQUIRED
Cam bolt -- 12pcs
Cam bolt -- 14pcs
Cam lock -- 12pcs
Bolt -- 8pcs
Wrench -- 1pc
Metal connect -- 4pcs
Safety strap kit -- 1set
5
6
7
EJ
Brace -- 2pcs
Brace -- 2pcs
Top Panel -- 1pc

Step 1 Step 2
Step 3
Assemble (1) into (Part# A , B , E), as shown. Assemble (Part #C) onto (Part #A) by (2,3),
as shown.
Put (Part #D) into Assembly Unit , as shown. Insert the (Part #G) to Assembly Unit, as shown.
Step 4

Step 5 Step 6
Step 7
Assemble (Part #B) onto Assembly Unit by (2,3),
as shown.
Step 8
Insert the (Part #H) to Assembly Unit, as shown.
Assemble (Part #I & J) onto (Part #E) by (4,5),
as shown.
Assemble (Part #E) onto Assembly Unit by (2,3),
as shown.

Step 9 Step 10
Step 11
Insert the (6) into Assembly Unit ,put the (Part #F)
onto Assembly Unit, as shown.
Assembly Fixing Strap(e) by Screw(c) with Washer
(b) to cabinet; tighten using Screwdriver,as shown.
Ensure the feet are leveled on floor.
Use a 3/8 in. drill bit (not included ) to drill
3/8 in.
pilot holes on the wall.
Insert Wall Anchor (a) into the holes until the
flanges on the Wall Anchor (a) are flush
against the wall.
Assembly the Fixing Strap on the wall by
Screw (d) with Washer (b), and tighten using
Screwdriver.