Luxier WSP03-T User manual

1WSP03 Rev. D 04/2020Luxir USA
Widespread Two Handles Lavatory Faucet
WSP03-TB (Brushed Nickel)
WSP03-TC (Chrome)
WSP03-TO (Oil Rubbed Bronze)
Features:
- Three Hole Installation
- Solid Brass Construction
- Drip Free 1/4 Turn Ceramic Cartridge
- Maximum ow rate 1.2 gpm at 60 psi
- Complies with:
NSF 61-9
ANSI / ASME A112.18.1
IAPMO / UPC / cUPC
CA AB-1953
CEC
Max. Deck Thickness 1”
8” ~ 12”
6.2”
8”
3”
2.6”
5.1”
1.75”2”
1.5” 1.5”
1.25” Hole Size
1/2” Connection
1” Hole Size
* Drawing not to scale. All Measurements are approximate*

2WSP03 Rev. D 04/2020Luxir USA
Thank you for purchasing Luxier products. Please read the information below and keep this
installation guide for future reference. If you require assistance, please contact our customer service
department at 1-877-711-8828, Monday - Friday 9AM - 5PM Paci c Time or by email at
[email protected].
Limited Lifetime Warranty (For USA Only)
The manufacturer warrants this product to be leak and drip free during daily normal household use
for as long as it is owned by the original purchaser of this product. Please keep a copy of the original
invoice as proof of purchase.
Should a malfunction occur within the warranty period, Luxier USA will, as its option, (1) repair or
replace the defective part(s) or product at no charge; (2) issue a refund of the purchase price paid
for the product (Valid within 30 days from the date of purchase); or (3) issue a credit to be applied
against the purchase of a new Luxier product. Shipping/delivery charges may apply and are in Luxier
USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident, negligence,
improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol
or other organic solvents, whether performed by a contractor, service company, or yourself, are
excluded from this warranty.
Our responsibility under this warranty is limited to only to replacement parts and no other costs.
Luxier USA will not be responsible for labor charges and/or damage incurred by installation, repair or
replacement, nor for any indirect incidental or consequential damages, losses, injury or costs of any
nature relating to this faucet. Except as provided by law, this warranty is in lieu of and excludes all
other warranties, conditions, and guarantees, whether expressed or implied, statutory or otherwise,
including without restriction those merchantability of  tness for use.
This limited warranty is non-transferable. This limited warranty only applies to products purchased
and installed in the United States. This limited warranty covers the original consumer purchase only
and does not include business, commercial or industrial use of this product. To obtain service under
the Limited Warranty, please contact Luxier USA at [email protected]. The Luxier USA Customer
Care Department will determine whether to repair or replace your product, issue a refund, or issue a
credit.

3WSP03 Rev. D 04/2020Luxir USA
Important Points
• This installation guide is subject to change without notice, please contact us to request the most
updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if
necessary.
• Read and understand this instructions completely before installation.
• Please follow all local building and plumbing codes.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this
product.
• Wrap all threaded connections, except the aerator in the spout, with Te on (PTFE) tape. Always
wrap in a counterclockwise direction.
• When installing your new faucet,  rst hand tighten the water supply hoses then use a wrench to
give the compression nuts an additional (1/4) turn. Do not over tighten the compression nuts as it
will reduce the integrity of the sealed connection.
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. Damage caused by improper
treatment will not be covered by product warranty. In addition, pay attention to the following points:
• Regular cleaning can prevent mineral build up on faucet spout.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
• Test the cleaner on a small area before using on the entire surface.
• Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
• Do not use abrasive / harsh chemical when cleaning the  xture as they will damage and dull the
 nish.
• When using spray cleaners, spray  rst onto a soft cloth or sponge. Never spray directly onto the
faucet as droplets can enter openings and gaps and cause damage.
• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
You may also need the following tools
1. Safety Glasses 5. Adjustable Wrench
2. Teon (PTFE) Tape 6. Screwdriver
3. Plumber’s Putty and Caulking 7. Water Supply Hoses
4. 1 3/8” Basin Wrench or
1 11/32” Shower Valve Socket Wrench

4WSP03 Rev. D 04/2020Luxir USA
Installation
A. Shut o water supply at the valves.
Remove old faucet and clean the mounting
surface for installation of new faucet.
D. Apply Teon (PTFE) tape on the thread
of the T connector and connect the water
inlet hoses to the T connector. Use an
adjustable wrench to tighten the ttings.
Do not overtighten the connection.
(IMPORTANT: The black hoses are longer
by design to accommodate wider installation.
For narrower installation, it is strongly
recommended to loop the hoses around
before connecting to the T connector to
avoid any kinks. Turn the T connector at an
angle will make connecting the black hoses
easier.)
F. Apply Teon (PTFE) tape on the thread in
a counter-clockwise direction.
Connect water supply hoses with 1/2” IPS
connectors to valves. Make sure the lter
is properly seated between the hose and
the brass pipe. Use an adjustable wrench
to tightening the hoses. Use a second
wrench to anchor the tting. Please do not
overtighten the ttings.
E. It is highly recommended to ush the
water lines before connecting the water
supply hoses (not included) to the faucet.
Place a water bucket under the cabinet, with
both water supply hoses inside the bucket.
Slowly turn on the valves and let water run
for about 45 seconds.
G. Turn on water supply and allow the unit
to run for about 1 minute while check for
leaks at all connections.
(Note: Sediments or mineral buildup will
clog the lters and decrease water ow. It is
recommended to clean the lters regularly to
maintain proper water ow to the faucet.)
B. Place spout with ange through the center
mounting hole on the mounting surface.
Secure spout with metal washer and metal
nut. Once the spout is secured. Push the
T connector onto the mounting tube until
it snap into place. (Caution: The 2 rubber
o-rings must be seated properly in the
grooves on the mounting tube.) Lock the
T connector in place by rmly inserting the
locking pin.
C. Slide hot and cold water handle / valve
through mounting holes. Make sure the
connecting hoses are installed toward the
center spout. Handles should point outward
in o position. Secure the handles with metal
washers and mounting nut. Hand tighten
the nut onto the valve and secure it by
tightening the screws
ABC
DF
G
E
01. Handle
02. Setscrew
03. Flange
04. Bonnet
05. Cartridge
06. Valve Body
07. Filter
08. Metal Washer
09. Mounting Nut
10. Screw
11. Aerator
12. Spout
13. Flange
14. Mounting Tube
15. O-Ring
16. Metal Washer
17. Mounting Nut
18. T Connector
19. Locking Pin
20. Water Supply Hose
* non-removable
01
11*
12
13
14*
15
20*
16
02
03
04
05
06
07
08
09
10
17
18
19