Luxier WSP11-TB User manual

1WSP11 Rev. B 03/2021Luxier USA
Widespread Two Handles Lavatory Faucet
WSP11-TB (Brushed Nickel)
WSP11-TC (Chrome)
WSP11-TG (Brushed Gold)
WSP11-TM (Matte Black)
WSP11-TO (Oil Rubbed Bronze)
Features:
- Three Hole Installation
- Drip Free 1/4 Turn Ceramic Cartridge
- Maximum ow rate 1.2 gpm at 60 psi
- Complies with:
ADA
NSF 61-9
ANSI / ASME A112.18.1
IAPMO / UPC / cUPC
CA AB-1953
CEC
Max. Deck Thickness 1.5”
* Drawing not to scale. All Measurements are approximate*
1.375” Hole Size
Approx. 22”long hose with 3/8” compression ttings
8.03”
5.08”
4.92”
Recommend 10” - 12” spread
1.97”
3.15”
1.89”

2WSP11 Rev. B 03/2021Luxier USA
Thank you for purchasing Luxier products. Please read the information below and keep this
installation guide for future reference. If you require assistance, please contact our customer service
department at 1-877-711-8828, Monday - Friday 9AM - 5PM Paci c Time or by email at
[email protected].
Limited Lifetime Warranty (For USA Only)
The manufacturer warrants this product to be leak and drip free during daily normal household use
for as long as it is owned by the original purchaser of this product. Please keep a copy of the original
invoice as proof of purchase.
Should a malfunction occur within the warranty period, Luxier USA will, as its option, (1) repair or
replace the defective part(s) or product at no charge; (2) issue a refund of the purchase price paid
for the product (Valid within 30 days from the date of purchase); or (3) issue a credit to be applied
against the purchase of a new Luxier product. Shipping/delivery charges may apply and are in Luxier
USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident, negligence,
improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol
or other organic solvents, whether performed by a contractor, service company, or yourself, are
excluded from this warranty.
Our responsibility under this warranty is limited to only to replacement parts and no other costs.
Luxier USA will not be responsible for labor charges and/or damage incurred by installation, repair or
replacement, nor for any indirect incidental or consequential damages, losses, injury or costs of any
nature relating to this faucet. Except as provided by law, this warranty is in lieu of and excludes all
other warranties, conditions, and guarantees, whether expressed or implied, statutory or otherwise,
including without restriction those merchantability of  tness for use.
This limited warranty is non-transferable. This limited warranty only applies to products purchased
and installed in the United States. This limited warranty covers the original consumer purchase only
and does not include business, commercial or industrial use of this product. To obtain service under
the Limited Warranty, please contact Luxier USA at [email protected]. The Luxier USA Customer
Care Department will determine whether to repair or replace your product, issue a refund, or issue a
credit.
Important Points
• This installation guide is subject to change without notice, please contact us to request the most
updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if
necessary.
• Read and understand this instructions completely before installation.
• Please follow all local building and plumbing codes.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this
product.
• Wrap all threaded connections, except the aerator in the spout, with Te on (PTFE) tape. Always
wrap in a counterclockwise direction.
• When installing your new faucet,  rst hand tighten the water supply hoses then use a wrench to
give the compression nuts an additional (1/4) turn. Do not overtighten the compression nuts as it
will reduce the integrity of the sealed connection.

3WSP11 Rev. B 03/2021Luxier USA
You may also need the following tools
1. Safety Glasses 5. Adjustable Wrench
2. Teon (PTFE) Tape 6. Screwdriver
3. Plumber’s Putty and Caulking
4. 1 3/8” Basin Wrench
01. Handle
02. Hex Screw
03. Cap
04. Bonnet
05. Cartridge
06. O-Ring
07. Plastic Base
08. O-Ring
09. Valve Body
10. Locking Nut
11. Inlet Water Hose
12. Outlet Water Hose
13. Spout
14. Mounting Rod
15. C Shaped Washer
16. C Shaped Metal Washer
17. Locking Nut
18. Spout Inlet Hose
19. Tee Connector
20. Pop Up Drain assembly
21. Aerator
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. Damage caused by improper
treatment will not be covered by product warranty. In addition, pay attention to the following points:
• Regular cleaning can prevent mineral build up on faucet spout.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
• Test the cleaner on a small area before using on the entire surface.
• Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
• Do not use abrasive / harsh chemical when cleaning the  xture as they will damage and dull the
 nish.
• When using spray cleaners, spray  rst onto a soft cloth or sponge. Never spray directly onto the
faucet as droplets can enter openings and gaps and cause damage.
• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
Parts Diagram
01
13
14
15
16
20
02
03
04
05
06
07
08
09
10
11
12
17
19
18
21

4WSP11 Rev. B 03/2021Luxier USA
Installation
A. Shut o water supply at the valves.
Remove old faucet and clean the mounting
surface for installation of new faucet.
D. Slide hot and cold water handle through
the 2 side mounting holes. Handles should
point outward in o position. Secure the
handles with the mounting nut.
G. Remove rubber washer and locking nut
from the drain assembly and slide the drain
into the sink. Install the rubber washer rst
and tighten the locking nut to install the
drain. Connect the drain to the P trap and
waste pipe.
F. Apply Teon (PTFE) tape on the shut o
valves. Thread the tape in counter-clockwise
direction. Use a wrench to tighten the hoses.
Please do not overtighten the connections.
E. Connect the 2 supply hoses to the Tee
connector. Make sure the hose are fully in-
serted until locked in place. There will be an
audible click when the hoses are connected
properly.
H. Turn on water supply and remove the
aerator with a small coin or a at head
screwdriver and let the water run for about
1 minute to clear any debris in the plumbing
system. Check for leaks at all connections.
Reinstall the aerator to complete the
installation.
(NOTE: Sediments or mineral buildup will
clog the aerator and decrease water ow.
It is recommended to clean the aerator
regularly to maintain proper water ow.
B. Place spout through the center mounting
hole on the surface. Secure spout with C
shaped washer, C shaped metal washer and
locking nut.
C. Insert the Tee connector to the center
spout inlet hose until it clicks in place. Make
sure the hose is fully inserted. There will
be an audible click when the connector is
connected properly.
HOT
COLD
ABC
D
Rubber Washer
Locking Nut
G
water supply line
F
H
E