LuxUVC LUXUVCBKSPR User manual

ELECTROSTATIC BACKPACK
12V BATTERY
RECOMMENDED
Scan to visit our product page
Ver. 06.21
1 of 4
SKU: LUXUVCBKSPR

01
Open lid on the tank and
remove all contents from the
inside.
03
Attach black cover to back of the
gun.
06
Attach black spray cover to front
of the gun.
To install nozzle of your choice; hold
white cross ring and twist nozzle on
by the black base. DO NOT twist top
of the nozzle. Hand tighten to avoid
leaks.*
04
Install green washer on
nozzle end of gun. Two may
be used, if needed.
SETUP
02
Insert white cylinder filter inside
the tank - just push into the hole.
07
If battery is not installed, open
door on tank and connect red
and black wires to the
terminals.
08
To charge battery, plug in power adapter to
tank. Red = charging; Green = done.
Upon first usage it is recommended to charge
overnight regardless of light indicator color.
09
Insert solution + white filter +
tank cap and turn on
electrostatic switch on the tank
to start. Use switch on gun to
turn on extended fan or mist.
ELECTROSTATIC BACKPACK
*Make sure to firmly hold the white cross ring at the gun tip while installing nozzle (and also when removing or switching nozzles). Nozzles should only be tightened by the base of the
nozzle (black in color). Twisting the tip of the nozzle may cause damage. You can however lightly tighten the
three nozzle heads of the metal nozzle if you are experiencing a stream spray effect.
Ver. 06.21
2 of 4

FUNCTIONS
GUN SETTINGS
TANK SETTINGS
[e-mail]
ELECTROSTATIC BACKPACK
Sprayer SWITCH
MAKE SURE THE ELECTROSTATIC SWITCH IS IN THE ON
POSITION ON THE TANK ITSELF BEFORE USING.
This button activates the standard sprayer misting
setting. If the tank power switch is not on, the gun will
spray, but electrostatic function will not be on.
Isymbol means the mist is on
Osymbol means the mist is off
FAN BLOWER SWITCH
You have the ability to turn on or keep off, the power
fan blower. The blower extends the range of the spray
a few more feet and is recommended only for large
or open spaces. If working within close proximity, it is
best to leave the blower off.
Isymbol means the power is on
Osymbol means the power is off
01
02
Electrostatic POWER
To begin use of electrostatic sprayer - turn
on this switch to activate electrostatic
function. Turn off when the sprayer is not in
use to preserve battery.
I symbol means electrostatic is on O symbol
means electrostatic is off
BATTERY Charging Port
Open the safety cover to access the power
input plug. Plug in the charging cord that
came with the unit. DO NOT use an unoriginal
cord as that may damage the unit.
01
02
01
02
01
02
Ver. 06.21
3 of
4

MISC SPECS
SAFETY INFORMATION
[e-mail]
The electrostatic sprayer is safe, and even if it is accidentally touched you may experience tingling sensation, but do not worry as it
will not cause any harm to the human body.
The electrostatic switch is located on the left side of the base and also a switch for controlling the electrostatic function. The
electrostatic switch must be activated before the power switch at the handle is turned on. When the electrostatic switch is turned on,
you may begin using. Anti-static gloves are recommended but not required.
(NOTE: if you want to test the electrostatic, you may use a common electric pen to check if the water in the tank is charged)
Please do not touch the nozzle parts by hand directly once installed and in-use. After shutting down, the nozzle should be in contact
with the object or the ground to eliminate residual static electricity.
(NOTE: metal switches cannot be used, or there will be a risk of electric shock)
Please do not let the nozzle directly touch objects directly when spraying. It is not advisable to use static electricity in an
environment with high humidity such as foggy or rainy days. Never use static electricity during lightning weather.
Fine atomization
The diameter of the nozzle of the electrostatic sprayer is relatively thin, and the mist sprayed is 4 times
thinner than the conventional sprayer. The spray is fine, so as to achieve the effect of saving solution.
The plastic red/black nozzle is 40 micron as the metal nozzle is 15 micron.
Strong ABSORPTION
When the electrostatic sprayer is working , the electrostatic spray forms an electric field. The solution in
the spray is attracted to the electrostatic attraction of the surface and attached to the surface, thereby
achieving a better killing effect.
(NOTE: the front and back of the object can both absorb solution.)
High efficiency
The electrostatic sprayer liquid is not easy to slip down, and can form a film on the front and back sides
of the object, which not only greatly saves the amount of solution spray, but also improves the spray
efficiency and greatly improves the disinfectant rate.
(NOTE: use it quickly and gently and spray it once, no need to spray repeatedly on objects. If it is
sprayed repeatedly, it will be counterproductive and the solution efficiency will be greatly reduced).
Product Maintenance suggestions
When not in use or idle , sprayer or/battery must be recharged every two months to extend battery life.
01
02
03
04
01
02
03
04
ELECTROSTATIC BACKPACK
Ver. 06.21
4 of 4
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact D2g customer service 844-221-3388.