LVS INTEGRA 95 Series User manual

INTEGRA 95XX SERIES
BARCODE QUALITY STATION
OPERATIONS MANUAL
VERSION 3.0.9
LVS®
THE LEADING PROVIDER OF
PRINT QUALITY INSPECTION SYSTEMS
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 1 of 105
Label Vision Systems
101 Auburn Court
Peachtree City, GA 30269
USA
Phone:
[phone]
Toll Free:
[phone]
Fax:
[phone]
E-mail:
[email protected]
Visit us online at
www.lvs-inc.com
M-95XX-3.0.9-A-En-0
INTEGRA 95XX Series Barcode Quality Station Operations Manual –English
LVS® IS AN ISO 9001:2008 REGISTERED COMPANY

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 2 of 105
No part of this publication may be reproduced or transcribed, stored in a retrieval
system, computer or otherwise, in any form or by any means, magnetic,
mechanical, electronic, optical, manual, or otherwise, and may not be translated
into any language without the express written permission of Label Vision
Systems, Inc. (“LVS®”). Information in this document may be changed or
updated without notice.
All LVS® publications contain proprietary confidential information of LVS®, and
possession and use of such proprietary confidential information is subject to
restrictions set forth by LVS® as described in the applicable non-disclosure
agreements and/or license agreements with LVS®. Any use of this publication
and related materials beyond the terms of said agreements is prohibited, and
LVS® reserves all rights in this publication and related materials.
The name LVS® is a registered trademark of Label Vision Systems, Inc.
Copyright
Copyright 2013 Label Vision Systems, Inc.
All rights reserved
Printed in the United States of America
How to Contact Us
Label Vision Systems, Inc.
101 Auburn Court
Peachtree City, GA 30269 USA
Voice: [phone]
Fax: [phone]
Toll Free: [phone]
Information: [email protected]
Internet: www.lvs-inc.com

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 3 of 105
Table of Contents
Product Discontinuation Notice...................................................................................6
Overview........................................................................................................................7
Important Safety Instructions.....................................................................................13
Software Specifications for the INTEGRA 95XX Series............................................14
Hardware Specifications for the INTEGRA 9510 and Auxiliary Readhead..............16
Hardware Specifications for the INTEGRA 9570.......................................................17
Hardware Specifications for the INTEGRA 9500.......................................................18
Hardware Specifications for the INTEGRA 9505.......................................................19
Basic Operations.........................................................................................................20
Welcome Tab...............................................................................................................25
Setup Tab.....................................................................................................................28
Camera.....................................................................................................................29
Grading Mode ...........................................................................................................31
Auto-Sector Feature ..............................................................................................31
Application Standards ...............................................................................................33
Selecting an Application Standard.........................................................................34
Application Standard Shortcut Keys.......................................................................35
Override Aperture..................................................................................................36
Creating Custom Reports..........................................................................................36
Current Information ...................................................................................................36
System Settings........................................................................................................37
Minutes before auto logoff.....................................................................................37
Days before calibration needed .............................................................................37
Allow Non-ISO blemish to affect grade ..................................................................38
Metric ....................................................................................................................38
Quiet zone processing...........................................................................................38
Reference..............................................................................................................40
Additional Reference .............................................................................................40
Company Name on Reports ..................................................................................40
Setup Operators....................................................................................................40
Product Lookup .....................................................................................................42
Distributor Information ...........................................................................................42
Optional Features......................................................................................................43
List of Options........................................................................................................43
Optional Features Activation..................................................................................43
Change Password.....................................................................................................43

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 4 of 105
Calibration Tab............................................................................................................44
Calibrate the System.................................................................................................45
Calibrated Conformance Standard Test Card Preventive Maintenance Instructions..48
Data Matrix Calibrated Conformance Test Card........................................................49
Grading Tab.................................................................................................................50
Section 1: 1D Codes .................................................................................................50
1. Overall Grade........................................................................................................51
2. ISO Grading..........................................................................................................53
3. View Box...............................................................................................................54
4. Grade Bar Graph...................................................................................................57
Bar Height Measurement.......................................................................................57
5. ISO/IEC Parameters Section.................................................................................58
6. Blemish (Non-ISO Parameter)...............................................................................59
Other Grading Screen Tools......................................................................................60
Note about Opacity................................................................................................60
Color Codes ..........................................................................................................61
Height and Width Measurement ............................................................................61
BarCode Too Wide for Field of View (Stitching Feature)........................................62
Section 2: Matrix Codes ............................................................................................68
Verify a Matrix Code..................................................................................................68
View Section .............................................................................................................68
1. Overall Grade....................................................................................................69
2. Defects..............................................................................................................69
3. Zoom.................................................................................................................69
4. OCR ..................................................................................................................70
5. Modulation.........................................................................................................70
Multi-Rotation Codes.................................................................................................71
DataMatrix.............................................................................................................71
QR Code ...............................................................................................................72
Section 3: Two-Dimensional Multi-Row Codes..........................................................73
Verify a PDF 417 or Micro PDF 417 Code.................................................................74
PDF417 Parameters..............................................................................................74
GS1 Databar Composite Verification.........................................................................75
Verify a Composite Code...........................................................................................76
Zoom Tab.....................................................................................................................77
SRP View Tab..............................................................................................................78
View Section .............................................................................................................81
Full Screen Waveform...........................................................................................81
Traditional Bar Growth and Shrinkage...................................................................83

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 5 of 105
Traditional Parameters Button...............................................................................84
Dimensional Analysis Button .................................................................................85
10-Line Grading Button..........................................................................................85
Print Button............................................................................................................85
Structure Tab...............................................................................................................86
Printing......................................................................................................................86
Use the Data Structure Analysis................................................................................87
Data Structure Analysis Example..............................................................................88
Archive Tab .................................................................................................................89
Import Image from File ..............................................................................................90
Export Image to File..................................................................................................92
Recent Reports (Last 30 Days) .................................................................................93
Delete Prior to Specific Date .....................................................................................93
Software Version History...........................................................................................95
Audit Trail Report ......................................................................................................95
Calibration Report .....................................................................................................95
Reference Report......................................................................................................95
Export Reference Data..............................................................................................95
Change SQL Connection...........................................................................................96
Create Backup Database ..........................................................................................98
Browse Backup Database.........................................................................................99
Print an Archived Report ...........................................................................................99
Preventive Maintenance Schedule...........................................................................100
Documentation..........................................................................................................103

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 6 of 105
Product Discontinuation Notice
INTEGRA 9500 Product Discontinuation
LVS® is discontinuing the INTEGRA 9500 as of December 31st, 2011; the
system will be supported for four years from December 31st, 2011 through
December 31st, 2015.
Repair of the INTEGRA 9500 is based on the availability of component parts and
is at the discretion of Label Vision Systems, Inc.
INTEGRA 9505 Product Discontinuation
LVS® is discontinuing the INTEGRA 9505 after introduction of the INTEGRA
9510 to the marketplace. The INTEGRA 9505 will be supported for four years
until December 31st, 2015. After discontinuation, repair of the INTEGRA 9505 is
based on the availability of component parts and is at the discretion of Label
Vision Systems, Inc.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 7 of 105
Overview
This manual covers the operating instructions for the INTEGRA 95XX Series
Barcode Verification Systems, which include the INTEGRA 9510, 9570, 9505,
9500 and Auxiliary Readhead* (see units below).
INTEGRA 9510
and
Auxiliary Readhead
INTEGRA 9570
(PATENT PENDING)
INTEGRA 9505
and
Auxiliary Readhead
INTEGRA 9500

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 8 of 105
* Auxiliary Readheads are used as an alternate reading device for grading
barcodes of different sizes that require a different field of view and minimum X
dimension or cell size than the main INTEGRA Barcode Verifier.
IMPORTANT: The user-supplied computer connecting to the 5.0 MP Auxiliary
Readhead must be running INTEGRA 95XX software version 3.0.8 or higher.
The standard features of the INTEGRA 95XX system are documented in this
manual. Special, upgraded features are documented in “Appendix G: Special
Features.” Appendix G includes the following topics:
Multi-Barcode Verification
Change Verification Report to One-Column Format
Change Verification Report Signature Lines
Change CommPort Settings
Automatic Login
Windows® Lockdown
Export Override
Custom Reports
Print “Data Structure Analysis Report”with “Verification Report”
Exclude “All” (Multi-Sector or Multi-Rotation) on Export
Account Password Reset
Application Standard Shortcut Keys
Decimal Grading
Appendix G is located on the Installation CD included with your system package.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 9 of 105
Installation Assistance
For installation assistance with the INTEGRA 9500, refer to the “INTEGRA 9500
Quick Start Guide.”
For software installation assistance with any INTEGRA 95XX system, refer to the
“INTEGRA 95XX Series Software Installation Guide”.
Important:
The INTEGRA 95XX system arrives to your site packaged in a specially
designed shipping carton. DO NOT discard this shipping carton in case you must
ship or store the system for any reason. Failure to use this carton when returning
your product to LVS® will void warranty.
IMPORTANT: All INTEGRA 95XX systems must use the calibration card and
installation CD issued with the system. The INTEGRA 95XX system, calibration
card and installation CD use the same serial number and must be used in
conjunction with each other to obtain correct calibration results. Failure to use the
calibration card and installation CD issued with the system will result in incorrect
calibration results.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 10 of 105
System Manuals
All INTEGRA 95XX system manuals are stored in the following locations:
Installation CD
Each system purchase is supplied with an installation CD
containing installation software and system manuals. See note
below.
Host Computer
After successful installation of the INTEGRA 95XX software,
the system manuals are located at the paths below:
Windows 7 (64-bit): C:\Program Files (x86)\I9500\Manuals
Windows 7 (32-bit): C:\Program Files\I9500\Manuals
Windows XP: C:\Program Files\I9500\Manuals
Computer Desktop
After installing the INTEGRA 95XX software, an “LVS
Manuals” icon is saved to the computer’s desktop. Double-
click the “LVS Manuals” desktop icon to access the system
manuals.
Note: Manuals Located on Installation CD:
When inserting the installation CD into the CD drive with Autorun activated,
screens automatically appear prompting you to install the INTEGRA 95XX
software. If you would like to view or print the manuals located on the Installation
CD prior to installing the INTEGRA 95XX software, follow the steps below:
Important: The steps below vary based on Windows®XP or Windows®7
operating systems. Follow the instructions below based on which operating
system resides on the computer running the INTEGRA 95XX software.
Windows XP Operating Instructions
1. Press and hold down the SHIFT key for 30 seconds while at the same
time inserting the installation CD into the CD drive; this prevents the
system from automatically launching the INTEGRA 95XX installation
files.
Warning: You must hold down the SHIFT key for 30 seconds.
Releasing the SHIFT key prior to 30 seconds will initiate the software
installation process. If this occurs, eject and then re-insert the
installation CD and follow step 1 again.
2. After 30 seconds, release the SHIFT key.
3. Open Windows Explorer and navigate to the CD drive containing the
INTEGRA 95XX CD (usually D:\).

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 11 of 105
4. Double-click on the “Manuals.bat” file.
5. A window opens containing the manuals located on the installation CD.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 12 of 105
Windows 7 Operating Instructions
1. Insert the installation CD into the CD drive. The following window appears.
2. Click “Open folder to view files.”
3. A window opens containing the manuals located on the installation CD.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 13 of 105
Important Safety Instructions
This unit has been carefully designed to provide years of safe, reliable
performance. However, as with all electrical equipment, there are some basic
precautions that you should follow to avoid personal injury or damage to the
system:
Before using the system, carefully read all the installation and operating
instructions.
Observe all warning instruction labels on the system.
To protect your system from overheating, make sure no openings on the
system are blocked.
Never insert anything into the openings of the system.
Do not use the system near water or spill liquid into it.
All components used to create your system are UL and CE approved. All
circuits were designed to incorporate maximum safety. However, any
equipment using electrical voltages may cause personal injury if
improperly handled.
Do not attempt to work on the system with the main power lines
connected.
Ensure that the AC power source matches the ratings listed for the
system. If unsure, check with your dealer or local utility provider.
Do not place the AC power cord where it can be stepped on. If the AC
power cord becomes damaged or frayed, replace it immediately.
Avoid looking directly into any system lights. If you need to examine the
lights, or look at any component near the lights, be sure to first turn off the
lights. If the lights cannot be turned off, then wear polarized sunglasses
while examining the lights.
To avoid damaging the system, turn off and unplug the system before
cleaning.
If the system ever needs repair, consult Label Vision Systems or your
LVS® Distributor.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance instructions in the literature accompanying this unit.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 14 of 105
Software Specifications for the
INTEGRA 95XX Series
Supported Symbologies include the following:
SYMBOLOGY
SUPPORTED STANDARD(S)
PPN (Pharmacy Product Number)
IFA Coding System / PPN-Code Specification
Code 39
ISO 16388
Interleaved 2 of 5
ISO 16390
ITF-14
ISO 16390 & GS1 General Specifications
Code-128
ISO 15417
GS1-128
ISO 15417 & GS1 General Specifications
GS1-128 with CC-A
ISO 15417, ISO 24723 & GS1 General Specifications
GS1-128 with CC-B
ISO 15417, ISO 24723 & GS1 General Specifications
GS1-128 with CC-C
ISO 15417, ISO 24723 & GS1 General Specifications
Code 93
AIM BC5
Codabar
AIM BC3
UPC-A
ISO 15420 & GS1 General Specifications
UPC-A with 2 Digit supplemental
ISO 15420 & GS1 General Specifications
UPC-A with 5 Digit supplemental
ISO 15420 & GS1 General Specifications
UPC-A with CC-A
ISO 15420, ISO 24723 & GS1 General Specifications
UPC-A with CC-B
ISO 15420, ISO 24723 & GS1 General Specifications
UPC-E
ISO 15420 & GS1 General Specifications
UPC-E with 2 Digit supplemental
ISO 15420 & GS1 General Specifications
UPC-E with 5 Digit supplemental
ISO 15420 & GS1 General Specifications
UPC-E with CC-A
ISO 15420, ISO 24723 & GS1 General Specifications
UPC-E with CC-B
ISO 15420, ISO 24723 & GS1 General Specifications
EAN-13
ISO 15420 & GS1 General Specifications
EAN-13 with 2 Digit supplemental
ISO 15420 & GS1 General Specifications
EAN-13 with 5 Digit supplemental
ISO 15420 & GS1 General Specifications
EAN-13 with CC-A
ISO 15420, ISO 24723 & GS1 General Specifications
EAN-13 with CC-B
ISO 15420, ISO 24723 & GS1 General Specifications
EAN-8
ISO 15420 & GS1 General Specifications
EAN-8 with CC-A
ISO 15420, ISO 24723 & GS1 General Specifications
EAN-8 with CC-B
ISO 15420, ISO 24723 & GS1 General Specifications
GS1 Databar –14
ISO 24724 & GS1 General Specifications
GS1 Databar –14 with CC-A
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar –14 with CC-B
ISO 24724, ISO 24723 & GS1 General Specifications

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 15 of 105
SYMBOLOGY
SUPPORTED STANDARD(S)
GS1 Databar –14 Stacked
ISO 24724 & GS1 General Specifications
GS1 Databar –14 Stacked with CC-A
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar –14 Stacked with CC-B
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Limited
ISO 24724 & GS1 General Specifications
GS1 Databar Limited with CC-A
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Limited with CC-B
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Expanded
ISO 24724 & GS1 General Specifications
GS1 Databar Expanded CC-A
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Expanded CC-B
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Expanded Stacked
ISO 24724 & GS1 General Specifications
GS1 Databar Expanded Stacked CC-A
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Expanded Stacked CC-B
ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Data Matrix
ISO 16022 & GS1 General Specifications
Data Matrix
ISO 16022
PDF-417
ISO 15438
Micro PDF-417
ISO 24728
QR Code 2005
ISO 18004
Micro QR Code 2005
ISO 18004
Aztec
ISO 24778
Laetus Pharmacode
Laetus
MaxiCode
ISO 16023
Han Xin
Draft AIM Specification
Additional Notes
GS1 General Specifications can be obtained by contacting your local GS1
office.
ISO Symbology Standards can be obtained from this link:
http://www.iso.org/iso/en/CatalogueListPage.CatalogueList?ICS1=35&ICS2=40
&ICS3=&scopelist=
AIM Symbology Standards can be obtained from this link:
https://www.aimglobal.org/estore/
In addition to adherence to the symbology specifications, the INTEGRA 95XX
Series complies with the following standards:
ISO 15415 - Bar code print quality test specification - Two-dimensional symbols
ISO 15416 - Bar code print quality test specification - Linear symbols
ISO 15426-1 - Bar code verifier conformance specifications - Part 1: Linear
symbols
ISO 15426-2 - Bar code verifier conformance specification - Part 2: Two-
dimensional symbols

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 16 of 105
Hardware Specifications for the
INTEGRA 9510 and Auxiliary
Readhead
Physical Properties
Depth = 9.062 inches (230 mm)
Width = 11.125 inches (282 mm)
Height = 10.5 inches (266.7 mm)
Viewing Window = 5 inches x 7 inches
(127 mm x 177.79 mm)
Weight:
Unpackaged weight (standalone
INTEGRA 9510 unit) = 6 pounds
(2.72 kg)
Shipping weight (includes all items
packaged in shipping box, such as
power supply, cables, manuals,
etc.) = 13 pounds (5.89 kg)
Video Camera
Monochrome. 5.0 megapixel
Minimum PC Requirements
(PC Supplied by User)
Windows® XP Professional or
Windows® 7 (Windows® Vista is not
supported)
Intel® Core™ 2 Duo Processor (or
equivalent)
2 GB RAM
800 x 600 Resolution
One available USB 2.0 port (additional
ports required for each Auxiliary
Readhead in use)
IMPORTANT: The user-supplied
computer connecting to the 5.0 MP
Auxiliary Readhead must be running
INTEGRA 95XX software version 3.0.8 or
higher.
Top Cover
5.5 inches x 7.5 inches
(139.7 mm x 190.5 mm)
Weight = 5.5 oz (162.65 grams)
Light Source
White Light
Red (660 nm) filter. Optional clear
window available for purchase.
Inputs / Outputs
USB 2.0 port
Power Supply 12 vdc @ 2.5 amps
(minimum)
Operating Temperature
10º C (50º F) to 30º C (86º F)
Storage Temperature
0º C (32º F) to 40º C (104º F)
Relative Humidity
20% to 70% (non-condensing)
Calibration
One of the following:
EAN/UPC Calibrated Conformance
Test Card (LVS® part # CAL002)
GS1-128 Calibrated Conformance
Test Card (LVS® part # CAL003)
Specifications subject to change without notice.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 17 of 105
Hardware Specifications for the
INTEGRA 9570
PATENT PENDING
Physical Properties
Height
Verifier height
Total height
including handle
2.13 inches
4 inches
54.10 mm
101.6 mm
Length
3.94 inches
100.08 mm
Width
6.56 inches
166.62 mm
Weight
2.3 pounds
1.04 kg
Line Scan Camera
400 DPI
Floating Sensor Head
Overall Scanning Width
5.4 inches (137.16 mm) in picket fence format
Up to 12.0 inches (305 mm) in ladder format
Minimum X-Dimension
1D (Narrow Bar Width): 8.8 mils (.0088”) (.223
mm)
2D (Cell Size): 12.5 mils (.0125”) (.317 mm)
Verification
1D and 2D codes that comply with ISO/IEC
standards and GS1 General Specifications
Minimum PC Requirements
(PC Supplied by User)
Windows® XP Professional or Windows® 7
(Windows® Vista is not supported)
Intel® Core™ 2 Duo Processor (or equivalent)
2 GB RAM
800 x 600 Resolution
One available USB 2.0 port
Light Source
Red Light
660 nm
Inputs / Outputs
USB 2.0 port
Operating Temperature
10º C (50º F) to 30º C (86º F)
Storage Temperature
0º C (32º F) to 40º C (104º F)
Relative Humidity
20% to 70% (non-condensing)
Calibration
EAN/UPC Calibrated Conformance
Test Card (LVS® part # CAL002)
Specifications subject to
change without notice.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 18 of 105
Hardware Specifications for the
INTEGRA 9500
Light Source
Computer
Storage Temperature
White Light
Intel-based processor
0ºC (32ºF) to 40ºC (104ºF)
Red Filter
512 MB memory
Calibration
660 nm
40 GB hard drive (minimum)
EAN/UPC Test Card
Inputs / Outputs
CD / DVD Re-writer
Part Number: CAL002
3 USB ports
Windows XP Professional
OR
1 Serial port
12V @ 4.87 A
GS1-128 Test Card
1 External VGA port
5V @ 12.2 A
Part Number: CAL003
External USB mouse
Elastomer keyboard
10/100 LAN (Ethernet)
Physical Properties
12 vdc @ 1 amp (nominal)
D = 432 mm (17”)
5 vdc @ 2.4 amps (nominal)
W = 330 mm (13”)
Main Power Supply:
H = 18 mm (18”)
Internal fuse (5A)
Weight = 12.5 kg (27.5 lbs)
350 watt ATX power supply
50/60 hz 100 to
240 VAC
Monitor
Built in
12.1 inch
800 x 600 LCD Display
Video Camera
Monochrome
2.1 or 1.3 Mega-pixel
Operating Temperature
10º C (50ºF) to 30º C (86ºF)
Relative Humidity
20% to 70% (non-condensing)
Specifications are subject to change without notice.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 19 of 105
Hardware Specifications for the
INTEGRA 9505
Light Source
White Light
Red Filter
660 nm
12 vdc @ 1.6 amps
Inputs / Outputs
USB 2.0 port
12 vdc @ 1.10 amps
Video Camera
Monochrome
2.1 or 1.3 Mega-pixel
Operating Temperature
10º C (50ºF) to 30º C (86ºF)
Relative Humidity
Calibration
20% to 70% (non-condensing)
EAN/UPC Test Card
Storage Temperature
Part Number: CAL002
0ºC (32ºF) to 40ºC (104ºF)
OR
Physical Properties
GS1-128 Test Card
D = 406 mm (16”)
Part Number: CAL003
W = 330 mm (13”)
H = 258 mm (10.14”)
Weight = 5 kg (11 lbs)
Minimum PC Requirements (PC Not Supplied)
Windows XP Professional
Intel Celeron 2.4 Ghz
512 MB RAM (1 GIG Recommended)
40 GB HDD
800 x 600 Resolution
(2) USB 2.0 ports
Specifications are subject to change without notice.

INTEGRA 95XX Series Operations Manual –English (M-95XX-3.0.9-A-En-0)
Approved: Ray Vaughan Effective: 03-June-2013 Supersedes: 18-April-2012
LVS® CONFIDENTIAL All contents copyright © LVS® 2013 Page 20 of 105
Basic Operations
The basic operational procedures for the INTEGRA 95XX Series are listed
below:
1. Turn on the system and wait 2 minutes for the lights to stabilize.
2. The system is setup with tabs located across the top of the screen. Each
tab is discussed in this guide.
3. Click the Setup tab and choose the desired Application standard (see
Figure below). Note: When prompted for an Operator ID and
Password, enter admin for both the Operator ID and Password.
4. Click the Calibration tab and calibrate the system by placing either of the
Master Grade barcodes (located on the supplied Calibration Test Card)
into the center of the field of view, ensuring that the blue line passes
through the “PASS” portion of the calibration label. Then, click the
Calibrate button (see Figure below).
Choose an Application standard