M2I TOP-PCVIEW Series User manual

TOP-PCVIEW Hardware Manual
M2I Corporation 1/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
M2I Corporation
Industrial PC-HMI
TOP-PCVIEW
Hardware Manual
Thank you for using TOP-PCVIEW series of M2I corporation.
Please read this manual carefully to know installing, wiring, operating, servicing and inspecting this equipment.

TOP-PCVIEW Hardware Manual
M2I Corporation 2/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Index
Index .................................................................................................................................................................................................................. 2
Chapter 1 Safety Precautions................................................................................................................................................................. 4
Chapter 2 Overview .................................................................................................................................................................................... 6
2.1 Product Introduction....................................................................................................................................................... 6
2.2 Package Contents............................................................................................................................................................. 6
2.3 Explanation of Model Name ....................................................................................................................................... 6
Chapter 3 Product Specifications......................................................................................................................................................... 7
3.1 Power Specifications ....................................................................................................................................................... 7
3.2 System Specifications ..................................................................................................................................................... 7
3.3 LCD Specifications............................................................................................................................................................ 7
3.4 Touch Specifications ....................................................................................................................................................... 7
3.5 Ethernet Specifications................................................................................................................................................... 8
3.6 Audio Specifications........................................................................................................................................................ 8
3.7 External Display Output Specifications................................................................................................................... 8
3.8 USB Specifications............................................................................................................................................................ 8
3.9 Others .................................................................................................................................................................................... 8
3.10 Optional Specifications................................................................................................................................................ 8
3.11 Environment Specifications ....................................................................................................................................... 9
3.12 Structure Specifications............................................................................................................................................... 9
Chapter 4 Parts Names and Functions.............................................................................................................................................. 9
4.1 TOP-PCVIEW10**** .......................................................................................................................................................... 9
4.2 TOP-PCVIEW 12 / 15 / 17 ****.................................................................................................................................10
4.3 TOP-PCVIEW19**** ........................................................................................................................................................10
4.4 Front Parts Names and Specifications..................................................................................................................11
4.5 Side Parts Names and Specifications....................................................................................................................11
Chapter 5 Installation ..............................................................................................................................................................................13
5.1 Installation Requirements ...........................................................................................................................................13
5.2 Installation Procedure...................................................................................................................................................13
5.3 Front USB (*Locker type, Option) ...........................................................................................................................15
Chapter 6 Interface with Other Device............................................................................................................................................16
6.1 Serial Communication Mode setting and specifications .............................................................................16
6.2 Ethernet setting and specifications........................................................................................................................18
6.3 USB Specification............................................................................................................................................................19
Chapter 7 Wiring .......................................................................................................................................................................................20
7.1 Power wiring .....................................................................................................................................................................20
7.2 Ground wiring ..................................................................................................................................................................20
Chapter 8 System Utilities .....................................................................................................................................................................21
8.1 System Recovery Solution..........................................................................................................................................21
8.2 Touch panel compensation .......................................................................................................................................24
8.3 EWF (Enhanced Write Filter) Settings ...................................................................................................................24
8.4 Backlight brightness settings ....................................................................................................................................26
8.5 RAID Settings (*Premium Option) ..........................................................................................................................26
Chapter 9 Maintenance ..........................................................................................................................................................................32

TOP-PCVIEW Hardware Manual
M2I Corporation 3/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
9.1 Cleaning the Display.....................................................................................................................................................32
9.3 Problems with the Device...........................................................................................................................................32
Chapter 10 Products and Warning Label.......................................................................................................................................33
10.1 TOP-PCVIEW10/12/15/17****.................................................................................................................................33
10.2 TOP-PCVIEW19****......................................................................................................................................................33
Chapter 11 Products Label....................................................................................................................................................................34
11.1 AC Power Models ........................................................................................................................................................34
11.2 DC Power Models........................................................................................................................................................34

TOP-PCVIEW Hardware Manual
M2I Corporation 4/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Chapter 1 Safety Precautions
■Before using the product
To use the product safely and effectively, please read the contents of this manual thoroughly before use. Please
keep to the safety precaution, for it is to prevent accidents and potential danger from occurring. Safety
precaution is classified into ‘Warning’ and ‘Caution’ and their meanings are as follows. Also the indicated
illustrations on the product and in the manual have the following meanings.
Violating the instruction may result in serious personal injury or death.
Violating the instruction may result in slight personal injury or product damage.
Be cautious, for danger may be present.
Be cautious, for there is a possibility of an electric shock.
■General Precautions
Do not press the screen with a hard or sharp object (awl, screwdriver, pen) with too strong a force.
It may cause malfunction of touch due to damage of the front sheet.
Do not use or store in an environment with high vibration.
Do not allow foreign objects such as water, liquids, or metal powders to enter the product. This may cause
breakage or electric shock.
Use the radio or mobile phone at least 30cm away from the main unit.
Two or fewer bright spots may appear on the LCD screen, and certain areas may appear brighter, but this
is not a defect in LCD characteristics.
Do not store or operate in direct sunlight. Direct sunlight can change the properties of the LCD.
■Design Precautions
Do not install the location which exceeds allowed temperature. Product can be damaged or shorten the life.
Especially Install environment as below should be avoided.
As the malfunction & incorrect result of Products could damage the stability of the entire systems and
human body, you must install damage preventing interlock circuit such as emergency stop, Protective
circuits, positioning upper and lower limit switch and interlock for forward/reverse operation.
When computer or other controllers communicate and exchange data with products or change operation mode of
products, set up protective sequence program in PC or Controller for protecting system from communication error.
The output signal or communication lines should be separated from the power line or high tensioned wire.
They should be installed 100mm (3.94 inch) or more from each other.
■Environmental conditions
Indoor use only.
Altitude up to 2000m.
The length of Power Cable should be 3m (10 ft) or less.
■Wiring Precautions
Be sure the wiring is done correctly by checking the product’s rated voltage and the terminal layout.
Incorrect wiring could result in fire, damage or malfunctions.
Tighten the terminal screw with the specified torque. If the screws of terminal are loose, it could result in

TOP-PCVIEW Hardware Manual
M2I Corporation 5/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
short circuit, fire, malfunctions. FG Terminal must be used a dedicated ground. Not doing so could result in
malfunctions.
a. Grounding should be the Class 3 grounding. The cable for grounding should be more than 4㎟.
b. grounding point be closed to the products and make short the distance to the ground cable if possible. Please see
below.
■Installation Precaution
Do not install the location which exceeds allowed temperature. Product can be damaged or shorten the life.
Especially Install environment as below should be avoided.
Do not Install product to the place which the ambient temperature is out of limits, from 0℃to 60℃or on the surface
of control board which high pressure equipment is installed.
Do not install to the place where strong shock or vibration continuously have impacted on product.
The space between back of product and back of control board must be more than 100mm for maintenance and
ventilation.
Do not storage and operate in the place in direct sunlight. By the strong ultraviolet rays can degrade the quality of LCD
Displays.
■Disposal Precaution
When you dispose of product, please treat it as industrial waste. It can create poisonous substances or
explosion.
■Cell Type Battery Specifications
If a "CMOS CHECKSUM ERROR" occurs during booting, the BIOS setup cannot be saved due to the
exhaustion of the CMOS battery, so users should replace the button battery that is fixed in the product.
Item
Content
Battery Voltage
DC 3V
Battery Model
CR2032(lithium Battery)
Battery lifetime
About 3 years (In case of ambient temperature 25℃)
Image
*Specifications are subject to change depending on the model.
■All field-wiring connections to this unit shall be from Limited Voltage. Limited below 24Vdc isolated
secondary source with an output fuse, or Class 2.

TOP-PCVIEW Hardware Manual
M2I Corporation 6/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Chapter 2 Overview
2.1 Product Introduction
The industrial PC-HMI touch panel with industrial PC is required in industry, Windows applications, and RS-
232C/422/485, Ethernet-based Control of the other devices that are connected to this unit (PLC) is a device
used to communicate with the primary objective.
2.2 Package Contents
please make sure that all of components are in the package.
Pictures shown may vary as a guide for understanding the real components.
Item
Figure
Quantity
Main Body
1
User Manual
1
Power Connector
1
Terminal block
5P connector
1
Mounting Clamp
6
Accessories
(Sold separate)
USB Memory
User Options
2.3 Explanation of Model Name
(1) Basic Model Name
TOP-PCVIEW
□□
□□
□
□
Series
Display Size
Option
Resolution
Power Type
10 : 10.4"
00 : Celeron
X : XGA (1024 x 768)
*A: AC
12 : 12.1"
10 : 4th Core-i3
S : SXGA (1280 x 1024)
D: DC
15 : 15.0”
20 : 8th Core-i3
H : HD (1366 x 768)
17 : 17.0"
30 : 8th Core-i5
19 : 18.5"

TOP-PCVIEW Hardware Manual
M2I Corporation 7/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
(2) Option
□□
-
□□
□□
□□
□BAY
Built-in program
RAM Capacity
O/S install location
DISK Capacity
HDD RACK
*WF : Windows OS+TOPVIEW License
R4 : 4GB
H : mSATA(On borad)
64 : 64GB
*1 : 1 Slot
WN : Windows OS
*R8 : 8GB
*HE : 2.5" SSD(External)
128 : 128GB
2 : 2 Slot
NF : TOPVIEW License
*256 : 256GB
NN : No Option
- “*” is a default option.
Chapter 3 Product Specifications
3.1 Power Specifications
Input Voltage
AC Power
AC100~240V, 50/60Hz
DC Power
DC 24V
Voltage Endurance
AC Power
AC85/170V, Less than 10ms
DC Power
DC 24V, Less than 10ms
Power Consumption
60W or less
Insulation resistance
500V DC, 10 ㏁
3.2 System Specifications
Item
Model
Description
CPU
00
Intel® Celeron® Processor J1900
10
Intel® Core-i3™Processor 4010U
20
Intel® Core-i3™Processor 8145UE
30
Intel® Core-i5™Processor 8365UE
Base/Burst Frequency / TDP
00
[email protected] GHz / 10W
10
1.7GHz / 15W
20
[email protected] GHz / 15W
30
[email protected] GHz / 15W
System Memory
00, 10
DDR3L SO-DIMM 8GB. (Max. Capacity 8GB)
20, 30
DDR4 SO-DIMM 8GB. (Max. Capacity 32GB)
Main Disk
2.5" SSD 256GB (*Default)
3.3 LCD Specifications
Item
Model
Description
Resolution and Luminance
TOP-PCVIEW10****
1024 X 768, 400cd/m2
TOP-PCVIEW12****
1024 x 768, 700 cd/m2
TOP-PCVIEW15****
1024 x 768, 500 cd/m2
TOP-PCVIEW17****
1280 x 1024, 250 cd/m2
TOP-PCVIEW19****
1366 x 768, 250 cd/m2
Number of Colors
16.7M
3.4 Touch Specifications
Touch Type
Analog resistive touch

TOP-PCVIEW Hardware Manual
M2I Corporation 8/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
3.5 Ethernet Specifications
Speed
10/100/1000Mbps
Connector
RJ-45 x 2
3.6 Audio Specifications
Audio Codec
Realtek ALC888S
I/O Connector
SPK, Line-in, MIC
3.7 External Display Output Specifications
Item
Model
Description
Graphic Controller
00
Intel Gen7 Graphic Engine
10
Intel HD Graphics 4400
20, 30
Intel UHD GFx 620
VGA
00
최대 2560 x 1600 at 60Hz
10
최대 1920 x 1200 at 60 Hz
20, 30
Not support
HDMI
00
HDMI 1.4a for HD video playback, 1080P at 60Hz
10
HDMI 1.4 for HD video playback, 4096 x 2304 at 24Hz
20, 30
HDMI 1.4 up to 4096 x 2160@30/24Hz
DP
00
Not support
10
Not support
20, 30
DP 1.2 up to 4096 x 2306@60Hz
Mulit-Display
00
VGA + HDMI, VGA + LVDS, HDMI + LVDS
10
VGA + HDMI, VGA + LVDS, HDMI + LVDS, VGA + HDMI + LVDS
20, 30
DP + HDMI, DP + LVDS, HDMI + LVDS, DP + HDMI + LVDS
3.8 USB Specifications
Item
Model
Description
Front
Common
USB 2.0 x 1
Side
00
USB 2.0 x 3, USB 3.0 x 1
10
USB 2.0 x 2, USB 3.0 x 2
20, 30
USB 3.1 x 4
3.9 Others
HDD RACK
1-Bay 2.5" HDD RACK
Default
2-Bay 2.5" HDD RACK
(*Option)
* TOP-PCVIEW10 does not support HDD RACK. (*SSD on board)
* If you need 2-bay HDD RACK, please contact M2I Corporation.
3.10 Optional Specifications
Item
Windows O/S Option
Adoptable Model
Optional O/S
- Windows Embedded Standard 7 (WES7) 32/64bit KOR/ENG
- Windows 7 Professional for Embedded System 64bit KOR
00, 10
- Windows 10 IoT 1809 LTSC 64bit 한글/영문
Common
TOPVIEW License USB
USB Dongle Inserted
Common
* A basic O/S of Celeron and 4th Core-i3 product is WES7.

TOP-PCVIEW Hardware Manual
M2I Corporation 9/ 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
** Intel 8th product is only for Windows 10, WES7 or Win 7 Pro is not supported to install.
3.11 Environment Specifications
Operation Temperature(℃)
No humidity
0 ~+60°C
humidity 95%
0~+40°C(Non-Condensing)
Storage Temperature(℃)
-20°C ~ +60°C
Atmosphere
No corrosive gas
Vibration Endurance
Amplitude: 10≤F＜25 ㎐(2G) X,Y,Z each direction (for 30 minutes)
Noise Immunity
1000Vp-p (Pulse width 1 ㎲)
Electrostatic Discharge
Electrostatic Discharge from EN61000-4-2: ±4㎸
Shock Endurance
10G X,Y,Z each direction(for 3 times)
withstand voltage
500V (Line-Line)
Ground connection
Class 3(Under 100Ω)
Protection Classification
Front Side: IP65, Rear Side: IP2X
3.12 Structure Specifications
Item
Model
Model Name
Dimension
Dimension(㎜)
00, 10
TOP-PCVIEW10
276 x 219.5 x 87.9
TOP-PCVIEW12
320 x 261 x 93.5
TOP-PCVIEW15
370 x 301 x 87
TOP-PCVIEW17
414 x 348 x 86.6
TOP-PCVIEW19
497 x 316 x 86.6
20, 30
TOP-PCVIEW19
497 x 316 x 94.8
Cooling System
Natural air circulation
Case Material
AL(Aluminium)
Chapter 4 Parts Names and Functions
4.1 TOP-PCVIEW10****

TOP-PCVIEW Hardware Manual
M2I Corporation 10 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
4.2 TOP-PCVIEW 12 / 15 / 17 ****
4.3 TOP-PCVIEW19****
TOP-PCVIEW
1900**
1910**
TOP-PCVIEW
1920**
1930**
Model Name
A (mm)
B (mm)
C (mm)
TOP-PCVIEW10****
276
219.5
87.9
TOP-PCVIEW12****
320
261
93.5
TOP-PCVIEW15****
370
301
87
TOP-PCVIEW17****
414
348
86.6
TOP-PCVIEW19 [00], [10] **
497
316
86.6
TOP-PCVIEW19 [20], [30] **
497
316
94.8

TOP-PCVIEW Hardware Manual
M2I Corporation 11 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
4.4 Front Parts Names and Specifications
No
Name
Description
①
Power LED
Display the System Power State
②
Front power switch
System power on / off touch switch (* On/off contact for more than 3 seconds)
③
USB Port
Front USB HOST Port
④
TFT LCD
TFT 16M Color LCD
⑤
Touch Panel
Analog resistive touch type
4.5 Side Parts Names and Specifications
4.5.1 Right
TOP-PCVIEW 10****
TOP-PCVIEW 12 / 15 / 17 / 19****
4.5.2 Left
TOP-PCVIEW 10 / 12 / 15 / 17 / 19 [00], [10] **
TOP-PCVIEW 10 / 12 / 15 / 17 / 19 [20], [30] **

TOP-PCVIEW Hardware Manual
M2I Corporation 12 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
4.5.3 TOP-PCVIEW 10 / 12 / 15 / 17 / 19 [00], [10] **
No.
Item
Type
Description
1
Power Switch
Rocker Switch-2P
System power ON / OFF switch
2
Power Connector
Terminal Block-3P
Power input, Pitch 7.62mm
3
Disk LED
LED
Display Disk operation status
4
Power LED
LED
Display Disk operation status
5
LAN Port #1, #2
RJ-45 2Ch.
Ethernet communication ports, configurable independent IP
6
VGA
DSUB-15P
VGA external monitor connection
7
HDMI
HDMI Port
HDMI external monitor connection
8
USB #1
USB 2Ch.
USB Ports
9
USB #2
USB 2Ch.
USB Ports
10
SPK
Audio Jack(3.5Pi)
Audio output
11
LINE-IN
Audio Jack (3.5Pi)
External Audio input
12
MIC
Audio Jack (3.5Pi)
External Mic input
13
COM1
DSUB-9(Male)
RS-232C Port
14
COM2
DSUB-9(Male)
RS-232C Port
15
COM3
DSUB-9(Male)
RS-232C/422/485 Port
16
COM4
Terminal Block-5P
RS-232C/422/485 Port, Pitch 3.50mm
17
HDD Rack
2.5" bay Slot
2.5" External Hard drive Rack
4.5.4 TOP-PCVIEW 10 / 12 / 15 / 17 / 19 [20], [30] **
No.
Item
Type
Description
1
Power Switch
Rocker Switch-2P
System power ON / OFF switch
2
Power Connector
Terminal Block-3P
Power input, Pitch 7.62mm
3
Disk LED
LED
Display Disk operation status
4
Power LED
LED
Display Disk operation status
5
LAN Port #1, #2
RJ-45 2Ch.
Ethernet communication ports, configurable independent IP
6
COM1
DSUB-9(Male)
RS-232C/422/485 Port
7
DP
DP Port
DP external monitor connection
8
HDMI
HDMI Port
HDMI external monitor connection
9
USB
USB 4Ch.
USB Ports
10
SPK
Audio Jack(3.5Pi)
External Audio onput
11
LINE-IN
Audio Jack (3.5Pi)
External Audio input
12
MIC
Audio Jack (3.5Pi)
External Mic input
13
COM2
Terminal Block-5P
RS-232C/422/485 Port, Pitch 3.50mm
14
COM3
DSUB-9(Male)
RS-232C Port
15
COM4
DSUB-9(Male)
RS-232C Port
17
HDD Rack
2.5" bay Slot
2.5" External Hard drive Rack

TOP-PCVIEW Hardware Manual
M2I Corporation 13 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Chapter 5 Installation
5.1 Installation Requirements
(1) To safe use of the product, keep the 100mm space between the wall and the product. And install the
cooling fan in an enclosed space to ensure performance and ventilation.
(2) TOP PC should be installed within 0 ~ 60°C(relative-humidity 0%) or 0~40°C(relative-humidity less than 95%,
(Non-Condensing)), otherwise the screen may be changed or cause malfunction and damage.
(3) Be sure that heat from surrounding equipment does not cause TOP PC to exceed its standard operating
temperature.
(4) When you don’t see within 30°, you may not see clearly.
(5) Please remove all of mechanical dangers around the product for preventing mechanical risks.
5.2 Installation Procedure
For mounting product to the control panel, it should be recommended following below items.
5.2.1 Panel Cut-out
Make a panel cut which product is mounted and insert the TOP PC to the panel form the front side.
(1) The Size of Panel Cut (Mounting Place)
Making the Panel Cut (Mounting Size) per each TOP PC Series as below Table, Before Installation.
IP2X
IP65
0 ~ 60°C
0 ~ 60°C

TOP-PCVIEW Hardware Manual
M2I Corporation 14 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Model Name
A(mm)
B(mm)
R(mm)
TOP-PCVIEW10****
260.0(+1.0/0)
202.0(+1.0/0)
Max. 5.0(+1.0/0)
TOP-PCVIEW12****
306.0(+1.0/0)
247.0(+1.0/0)
TOP-PCVIEW15****
355.0(+1.0/0)
286.0(+1.0/0)
TOP-PCVIEW17****
400.0(+1.0/0)
334.0(+1.0/0)
Max. 2.0(+1.0/0)
TOP-PCVIEW19****
479.0(+1.0/0)
298.0(+1.0/0)
(2) Fixation
Installation methods should be following by using the supplied installation Clamps.
a. Insert the clamp into the slot of Product.
b. Secure the Product in the mounting cut-out from behind with the clamp.
c. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor can’t work
properly. Tighten the screw to 0.5Nm.
Caution: Front protection (IP) will not able to work when clamp is not tightened in 0.5N.m power.

TOP-PCVIEW Hardware Manual
M2I Corporation 15 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
5.3 Front USB (*Locker type, Option)
5.3.1 Open / Close
(1) Open the cover: The cover opens when you insert the USB connector into the front USB Home.
(2) Gender Remove: Hold down the button below and pull back the USB gender.
(3) Close the cover: Close and slide the cover of the connector.
* Locker type USB cover is required for front USB gender use. Please contact M2I Corporation.

TOP-PCVIEW Hardware Manual
M2I Corporation 16 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Chapter 6 Interface with Other Device
Please refer to below explanations to communicate with other devices.
6.1 Serial Communication Mode setting and specifications
6.1.1 Set serial communication mode
Boot <DEL> or <ESC> Press the key to set the communication mode can be changed in CMOS.
(1) TOP-PCVIEW ** [00], [10] **
Advanced -> IT8768(E) Super IO Configuration -> Select Serial Port -> Select one in [Serial Port] Mode from
[RS-232 Mode], [RS-422 Mode], and [RS-485 Mode].
TOP-PCVIEW ** [00]** TOP-PCVIEW ** [10]**
(2) TOP-PCVIEW ** [20], [30] **
Advanced -> iManager Configuration -> Select Serial Port -> Select one in [Serial Port] Mode from [RS-232
Mode], [RS-422 Mode], and [RS-485 Mode].
6.1.2 Available Communication Mode by Port
Serial mode can be chosen in COM1 ~ COM4. You can set below communication mode.
(1) TOP-PCVIEW ** [00], [10] **
Serial Port
COM1
COM2
COM3
COM4
Manufacturer status
RS-232C
RS-232C
RS-485
RS-485
Available settings
Not available
Not available
RS-232C
RS-232C
RS-422
RS-422

TOP-PCVIEW Hardware Manual
M2I Corporation 17 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
(2) TOP-PCVIEW ** [20], [30] **
Serial Port
COM1
COM2
COM3
COM4
Manufacturer status
RS-232C
RS-232C
RS-232C
RS-232C
Available settings
RS-422
RS-422
Not available
Not available
RS-485
RS-485
6.1.3 Serial Communication Specification
(1) RS-232C
Item
Description
Protocol
Full Duplex
Synch.
Asynchronous
Communication Distance
About 15m
Type of connection
1:1
Control Code
ASCII Code or HEXA Code
Baud Rate
Max. 115,200 bps
Data Type
Data Bit
7, 8 bit
Parity Bit
NONE, ODD, EVEN Parity
Stop Bit
1, 2 bit
Connector Type
DSUB 9pin(Male), Terminal Block 5P(3.50mm)
(2) RS-422/485
Item
Description
Protocol
Full Duplex, Half Duplex
Synch.
Asynchronous
Communication Distance
About 500m
Type of connection
1:N (N ≤31)
Control Code
ASCII Code or HEXA Code
Baud Rate
Max. 115,200 bps
Data Type
Data Bit
7, 8 bit
Parity Bit
NONE, ODD, EVEN Parity
Stop Bit
1, 2 bit
Connector Type
DSUB 9pin(Male), Terminal Block 5P(3.50mm)
(3) Pin Number and Signals for DSUB-9 (RS-232C Only)
Relevant Ports: [00], [10] - COM1, COM2 / [20], [30] - COM3, COM4
Type
Pin No.
Signal
Direction
Meaning
9Pin male
1
DCD
Input
Data Carrier Detect
2
RXD
Input
RS-232C Receive Data
3
TXD
Output
RS-232C Transmit Data
4
DTR
Output
Data Terminal Ready
5
SG
GND
Signal Ground
6
DSR
Output
Data Set Ready
7
RTS
Output
Request to Send
8
CTS
Input
Clear to Send
9
RI
Input
Ringing Indicator

TOP-PCVIEW Hardware Manual
M2I Corporation 18 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
(4) Pin Number and Signals for DSUB-9 (RS-232C/422/485)
Relevant Ports: [00], [10] - COM3 / [20], [30] - COM1
Type
Pin No.
Signal
Direction
Meaning
9Pin male
1
TXD(-)
TRX(-)
Input/Output
422: TXD(-)
485: TRX(-)
2
TXD(+)
TRX(+)
RXD
Input/Output
422: TXD(+)
485: TRX(+)
232C: RX
3
RXD(+)
TXD
Input/Output
422: RXD(+)
232C: TX
4
RXD(-)
Input
422: RXD(-)
5
SG
GND
Signal Ground
6
DSR
Output
Data Set Ready
7
RTS
Output
Request to Send
8
CTS
Input
Clear to Send
9
RI
Input
Ringing Indicator
(5) Pin Number and Signals for Terminal Block-5P (RS-232C/422/485)
Relevant Ports: [00], [10] - COM4 / [20], [30] - COM2
Type
Pin No.
Signal
Direction
Meaning
1
TXD(+)
TRX(+)
RXD
Input/Output
422: TXD(+)
485: TRX(+),
232C: RX
2
TXD(-)
TRX(-)
Output
422: TXD(-)
485: TRX(-)
3
SG
GND
Signal Ground
4
RXD(+)
TXD
Input/Output
422: RXD(+)
232C: TX
5
RXD(-)
Input
422: RXD(-)
* For Serial Communication with RS-232C, Twisted Pair Cable must be used to communication cable corresponding to each Signal Pins such
as RXD & TXD and SG. The RD & SD should be wired by cross connection. SG must be wired direct connection.
* For Serial Interface with RS-422/485, Twisted Pair Cable must be used to communication cable corresponding to each
Signal Pins such as [TXD+, TXD-], [RXD+, RXD-] and [TRX+, TRX-].
* The shield cable of communication should not be used to signal ground. It may cause failure of communication.
* Serial port is not isolated.
* SG (Signal Ground) and FG (Frame Ground) are connected internally.
* If you are connecting external devices SG careful not to have a short circuit.
6.2 Ethernet setting and specifications
(1) Ethernet Specification
Item
Description
IEEE Compliant
TOP-PCVIEW ** [00], [10] **
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, 10BaseT/100BaseT/1000BaseT
TOP-PCVIEW ** [20], [30] **
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.ab,

TOP-PCVIEW Hardware Manual
M2I Corporation 19 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
10BaseT/100BaseT/1000BaseT
Speed
10M / 100M / 1000M bps
Communication Method
Base Band
Communication Cable
UTP (Unshielded Twisted Pair)
Modular Jack
RJ-45 x 2
(2) RJ45 Pin Map
Type
Pin No.
color
Signal
1
Orange/White
TX+(10/100M), BI_DA+(GHz)
2
Orange
TX-(10/100M), BI_DA-(GHz)
3
Green/White
RX+(10/100M), BI_DB+(GHz)
4
Blue
BI_DC+(GHz)
5
Blue/White
BI_DC-(GHz)
6
Green
RX-(10/100M), BI_DB-(GHz)
7
Brown/White
BI_DD+(GHz)
8
Brown
BI_DD-(GHz)
* IP configuration when connecting separated by internal / external network, you must enter each separate IP.
* Use a 1Gbps UTP cable is required standard Cat 5e or CAT 6 confirmation.
* UTP Cable Contents
Cat 5e
Cat 6
Speed
MAX. 1Gbps
1Gbps or more
Band width
100Mhz
250Mhz
Data Loss
100m Increase data loss
No data loss over 100m intervals
6.3 USB Specification
6.3.1 USB Port
Type
Item
Description
USB Interface
USB 3.1/3.0/2.0/1.1
Speed
Max.480Mb/s, Max.5Gb/s
Current Consumption
USB 2.0: 5.0V@500mA, USB3.0: 5.0V@900mA
Connector type
Type A(2ch)
* To use USB 3.0, your device must also support USB 3.0 specification.
* Ports with blue color inserts support USB 3.0.
6.3.2 Front USB
Type
Item
Description
USB Interface
USB2.0/1.1
Speed
Max.480Mb/s
Current Consumption
5.0V@500mA
Cable Length
1.5m (Cable from M2I is recommended. Meet the length limit for other
cables.)
Connector type
Micro USB B, Female

TOP-PCVIEW Hardware Manual
M2I Corporation 20 / 34
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: [phone], Fax: [phone], www.m2i.co.kr
Chapter 7 Wiring
7.1 Power wiring
(1) The Power cable should have the following specification.
Power Cable Specification
0.75~2.5mm2 (18~12AWG)
FG Cable Specification
2mm2(14AWG) or more
Conductor type
Simple or Stranded wire(Use Copper Conductors only)
Bolt tightening force
≥0.5N.m
Conductor length
Temperature rating of the field installed conductors
65℃Only
(2) The Power terminal should have the following specification.
Use Pin type terminal for preventing from wearing out and improving the electrical transmission.
B
L
F
E
D
d
1.8~2.0
22~18
12~14
5
3.3~3.8
2~2.5
(3) Wiring of power is as follows.
AC Power
DC Power
7.2 Ground wiring
(1) The Product has enough anti-noise measure, so except that there are many noises specially, the ground is
not needed. When doing ground, please refer to the followings.
(2) The ground should be the exclusive ground. The ground should be type 3 ground (ground resistor is less
than 100Ω)