VeriFone V240m User manual

NEXT
Getting started with
your Verifone v240m
pay terminal

Getting started
Thank you for ordering the
Verifone v240m payment terminal.
Your terminal is locked for security reasons.
This guide explains how to unlock and
activate your terminal, and how
to perform transactions.
You will require your Merchant Number,
which can be found within your
welcome pack or e-mail.
NEXT

Contents
• Power-up and Activation
• Adding Wi-Fi
• Performing a Sale
• Performing a Refund
• Performing a Reconciliation
NEXTPREVIOUSBACK TO START

Power-up and Activation
PREVIOUS NEXTBACK TO CONTENTS
Power-up
and Activation

Power-up and Activation
Plug the power supply into the power slot
of the V240m base unit.
PREVIOUS NEXTBACK TO CONTENTS

Place the V240m terminal onto the
base unit, and switch the power on.
BACK TO CONTENTS
Power-up and Activation
PREVIOUS NEXT

Power-up and Activation
The V240m will initialise.
BACK TO CONTENTS PREVIOUS NEXT

Power-up and Activation
When you see the 'Terminal Locked'
screen, key in your Merchant Number
as the password and press the
green [ENTER] key.
Press the green [ENTER] key twice
more until the Sale Screen is
displayed.
PREVIOUS NEXTBACK TO CONTENTS

Power-up and Activation
You are now ready to take payments.
Your V240m terminal is pre-
configured to use either the 3G
mobile network or Bluetooth
for communications.
This will allow you to authorise
sales immediately.
You can also enable Wi-Fi as the
primary communications method.
This will allow the device to use
Wi-Fi in preference to 3G or Bluetooth.
To enable Wi-Fi, please follow the
steps in the ADDING Wi-Fi section
here.
PREVIOUS NEXTBACK TO CONTENTS

Adding Wi-Fi
PREVIOUS NEXTBACK TO CONTENTS
Adding Wi-Fi

Adding Wi-Fi
PREVIOUS NEXT
Press the main logo at the top
of the screen.
On Main Menu (1/2), press the
down arrow.
BACK TO CONTENTS

PREVIOUS NEXT
Press 1 on the keypad or select
Configuration on screen.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Enter the supervisor password
(default 1234).
Press 1on the keypad.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
You should now see the
Communication Panel.
Drag the screen downwards
(as per a smartphone) and touch
Configuration.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Select Network Interface.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Select WiFi.
Select WiFi Scan.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Select your desired network
from the list of detected networks.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Select Add.
Select Pre-Shared-Key (PSK).
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Enter the Wi-Fi password / key.
Select OK.
BACK TO CONTENTS
Adding Wi-Fi

PREVIOUS NEXT
Select Save.
Select OK.
BACK TO CONTENTS
Adding Wi-Fi