POSIFLEX XT-3815 User manual

XT-3815/3915IR
1
Fanfree LCD Touch Terminal
Quick Installation Guide
Package Contents
XT-3815 or XT-3915IR terminal
with base stand x 1
60W power adaptor x 1
Power cord x 1
Screw for IO cable cover x 2
Quick installation guide x1
Recovery or information CD x 1
Product Features
Standard Features
System
Intel Bay Trail-D J1900 2.0G up to 2.42G, 2M Cache, 4 core
(for XT-3815/3915IR)
Mechanical Structure
Fanfree structure with Aluminum die-cast main unit casing
Water resistant structure allowing easy cleaning
Foldable base
Display
High-quality 15” TFT active matrix LCD monitor provided
with true-flat Projected Capacitive touch panel supporting
10-point multi-touch for 3815 and with Infrared touch panel
for XT-3915IR
16780900020 Ver. A0
HUhttp://www.posiflex.com U

Optional Items
System
DDR3L SODIMM memory expansions up to 8GB (Max.) for
XT-3815/3915IR (J1900) in one SODIMM
Preload Windows POSReady 7 / Win 7 / Windows Embedded
8.1 Industry / Linux per request
WIFI
Wireless LAN module, through Mini PCI-E Interface
Connection Cable
Parallel extension cable
RJ50-to-DB9 serial port conversion cable
Split cable for 2 cash drawer control
Base
GEN 8E base including UPS battery and poweredUSB board,
and supporting 60W/80W/150W power adaptor
Integration Kit
Integrated side mount upgrade kits, such as SA-105 provided
with optional MSR, SA-205 provided with iButton, SA-305,
and SA-405
1” SATA SSD
PoweredUSB kit in GEN 8E base stand, such as PU-480 or
PU-490
Power adapter kits for 80W/150W power adapters
Back mount displays, such as LM/TM-3010/3014 and PD-
6307
2

Views of the XT-3815/3915IR
Front and Rear Views of Terminal with Gen 7E Base Stand
3
Left Side View of Terminal with Gen 7E Base Stand
Bottom View of Terminal with GEN 7E Base Stand
Neck Cover
DDR3 Memory Cover
LCD Touch Panel HDD Cover
Power Indicator
Base Stand
Hinge
for main uni
t
Cable Cover
Cable Exit
Power Button
Brightness Adjustment
Button “+”
Brightness Adjustment
Button “-”
USB 2.0 Port
Lockin
g
Hoo
k
Bottom Plate
Rubber Cushion
Wrapping Screw

Front and Rear Views of Terminal with GEN 8E Base Stand
4
Left Side View of Terminal with GEN 8E Base Stand
Bottom View of Terminal with GEN 8E Base Stand
DDR3 Memory Cover
LCD Touch Panel
Power Indicator Base Stand
HDD Cover
Hinge
for main unit
Cable Exit
Neck Cover
Cable Cover
Power Button
Brightness Adjustment
Button “+”
Brightness Adjustment
B
u
tt
o
n “-”
USB 2.0 Port
Lockin
g
Hoo
k
Rubber Cushion
Wrapping Screw
PoweredUSB Board Cover
Bottom Plate
Power Adaptor Chamber UPS Chamber

Views of I/O Interfaces of Terminal
5
1 DC-IN Power Jack 6 VGA Port
2 UPS Port 7 LAN Port
3 CR Port 8 USB 2.0 Port
4 DB9 COM Port 9 USB 2.0 Port
5 RJ50 COM Port 10 USB 3.0 Port
Installing Power Adapter Kit onto GEN 8E Base Stand
The power adapter kit is optional and, before shipping, is
installed onto the optional GEN 8E base stand. Upon your needs,
you can purchase and install the kit for 80W or 150W power
adapter. The introduction to the kit and the brief description of
installation of the kit are made below.
For the detailed description of installation of the 80W/150W
power adapter kit, refer to the XT-3815/3915IR technical manual.
Secure the Power Cord
To avoid the power cord from being pulled out
accidentally, the power adapter kits are shipped
with a power cord bracket.
After installing the power adapter kit and
connecting the power cord to the power adapter, remember to use
the power cord bracket to secure the power cord.
Fixin
g
with screw
1 2
3
6
45 1
0
9
8
7

Connecting Power Cable Connector to the Terminal
Before turning turn ON the terminal, connect the power cable
connector to the power jack of the terminal.
CAUTION: Before connecting the power cable to the power jack of
main unit, do NOT touch any metal pin of the connectors
or circuits to avoid high voltage hazard or electrostatic
discharge damage.
Powering ON the XT-3815/3915IR
After connecting the power cable to the
power jack of main unit, slightly push to
open the power button cover at the left
side of the main unit.
Then press the power button to power on
the main unit. To power it off, press the
button again.
Once powering off the system, if you want
to power it on again, please wait for at
least 3 seconds.
If the system hangs due to a reason, such as software resource
conflict, please press and hold the power button for 10 seconds
around to forcedly shut down the system.
6

Power Indicator
There is a power LED indicator serving for
several purposes located at the center of lower
rim of LCD panel. The relationship between the indicator status and
other conditions is summarized below:
Indicator Status System Status External
Power UPS Battery Powering Up
Off Off Off Not present Not possible
Off Off Off Present Not allowed
Green Off On No influence Allowed
Blue On On No influence
Blue/Flash On Off Activated
Green/Rapid Flash On Off Battery low N/A
Installing an Operating System
This product is highly professional equipment. Therefore, we do
NOT encourage you to install any operating system into this
machine. Posiflex Technology, Inc. shall not be responsible for any
technical support to questions on this aspect. We suggest that you
contact your dealer for OS installation.
7

8
Specifications
XT-3815/3915IR
CPU Intel Bay Trail-D J1900 2.0G up to 2.42G, 2M Cache, 4 core
Memory DDR3L 1333 FSB, SO-DIMM socket *1, 8G (Max.)
OS POSReady 7 / Win 7 / Windows Embedded 8.1 Industry / Linux per
request
Display
XT-3815:
15-inch TFT LCD monitor (1024x768) with true-flat pc touch panel
XT-3915IR:
15-inch TFT LCD monitor (1024x768) with infrared touch panel
Storage SATA HDD x 1 + 1” SATA SSD x 1
Ethernet 10/100/1000 Mb x 1 port
WLAN Optional, through mini PCI-E interface
Power
Supply 12 VDC power adaptor, 60W / optional UPS battery (2300mAh/12V)
Serial port RJ-45 X 1, DB9 X 3, RJ-50-to-DB9 cable (Optional)
Parallel port proprietary port connector in jumper setting window
(by specially optional conversion cable)
CR Port 1 port, available for controlling 2 CR.
USB Port Standard, 6 ports on the I/O plate (USB 2.0 X 5, USB3.0 X 1), 1 port
on the left side (USB2.0), 3 USB headers reserved for internal USB
device use
PS/2 KB
Port Pin header on back window
Audio Built-in 2W audio speaker
Extension
slot Mini PCI-E slot, with USB signal
Power-Off
Control Hardware button or by software control
Power
Switch Soft switch
Power-ON
Wake-Up Through alarm or LAN
Mechanical
installation Desktop or wall mount
Power LED
Indicator Power ON/ standby, bi-color LED indicators
Temp &
Humidity Operation Temp.: 0 to 40 ℃/ Storage Temp.: 20 to 85℃
Humidity: 10 to 90 %; 5 to 90 % (operation condition)
To get the detailed information on ※ XT-3815/3915IR, please download the
technical manual of this model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).