M2TECH MANUNTA EVO Phono 3 User manual

MANUNTA
BY M2TECH
EVO Phono 3
MC/MM Phono PreamplifiER
USER MANUAL
REV PRA – 11/2022

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
2

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Warning!
Changes or modifications not authorized by the manufacturer can invalidate the
compliance to CE regulations and cause the unit to be no more suitable to use. The
manufacturer refuses every responsibility regarding damages to people or things
due to the use of a unit which has been subject to unauthorized modifications or to
misuse or to malfunction of a unit which has been subject to unauthorized
modifications.
This unit is compliant with the following CE regulations: CEI EN 022:2009 Class B (Radiated Emissions),
CEI EN 024:1999, CEI EN 024:A2/2003, CEI EN 024:IS1/2008 (Radio Frequency Electromagnetic
Fields, 0Hz Magnetic Field Immunity Test and Electrostatic Discharges – ESD).
For a proper operation of this unit, all connections to other equipment in the system must be done
when all equipment are off. Failing to comply with this advice may lead to damage to the Evo Phono
.
The label above, printed on the product case, indicates that the product, when no more usable, can’t be
treated as generic garbage, but must be disposed of at a collection point for recycling of electrical and
electronic equipment, in compliance with the WEEE regulation (Waste of Electrical and Electronic
Equipment).
By making sure that this unit is correctly recycled, you will help preventing potential damages to environment
and human health, which could be caused by a wrong treatment of this product as generic garbage.
Materials’ recycling helps saving natural resources. For more in-depth information about recycling this
product, please contact M2Tech Srl.
WARNING: the information contained in this manual are considered to be reliable and accurate.
M2Tech reserves the right to change or modify the information any time, without prior advice. It’s up
to the customer to ensure that the manual being consulted is the latest version.
Copyright © 2022, M2Tech Srl
3

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Dear customer,
Thank you for purchasing Evo Phono 3. You are the owner of a very high quality phono
preamplifier with many unique features designed to obtain the best performance in every
hi-fi system.
Evo Phono 3 implements a specific set of technological and functional solutions, from the
discrete components MC step-up, to the passive RIAA equalization, to the low noise
supply network that powers all stages with clean current, ease of use and reliability.
Evo Phono 3 is provided with separate inputs for MC and MM cartridges, to allow for using
two turntables or a turntable provided with two arms.
The gain is enough to accommodate every cartridge model and to drive every amplifier.
The fully-loaded remote control allows for total control of the Evo Phono 3, as well as
other Manunta by M2Tech products.
We’re sure that your expectations will be fulfilled by purchasing Evo Phono 3: you’ll hear
your favourite music as never before, so you can now prepare for a whole new listening
experience!
Marco Manunta, CEO
Please note here your Evo Phono 3 serial number and purchase info for future reference:
S/N: _______________________ Date of Purchase: _________________________
Place of Purchase__________________________
Note: Proof of retail purchase, such as your purchase receipt, will be required in the unlikely event
that any warranty service will be required.
Copyright © 2022, M2Tech Srl
4

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
TABLE OF CONTENTS
1. Unpacking and Placing the Unit........................................................................................7
2. Front Panel........................................................................................................................9
3. Back Panel......................................................................................................................11
4. Remote Control...............................................................................................................13
. Connecting and Powering the Unit.................................................................................1
6. Cleaning the Unit.............................................................................................................17
7. Using the Evo Phono 3..................................................................................................19
7.1. Gain Settings............................................................................................................19
7.2. MC Input Load Impedance.......................................................................................19
7.3. MM Capacitive Load.................................................................................................20
7.4. Subsonic Filter..........................................................................................................20
8. Specifications..................................................................................................................21
Copyright © 2022, M2Tech Srl

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
6

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
1. Unpacking and Placing the Unit
Lay the package on a table. Open the box by lifting the front wing. The following items are
included:
one Evo Phono 3;
one wall wart (AC-to-DC adapter);
one remote control;
two AAA type batteries.
Should one or more item be missing, please contact your retail dealer.
Remove the Evo Phono 3 from the box and place it onto a stable base, far from heat
sources. Avoid full sunlight on the unit. Allow for ample room around the unit for venting.
The Evo Phono 3 is a high efficiency device; therefore it doesn’t produce relevant heat
during its operation. Regardless, it’s recommended to guarantee an adequate air flow
around the unit. Moreover, every time it will mainly be operated by remote control, it’s
recommended to place it so as the remote control’s infrared signals can easily reach its
front panel.
Avoid smoke, moisture, dirt and liquids from reaching the unit. Please note that any signs
of abuse will void warranty coverage.
Do not place the unit on thick carpets or inside a box or piece of furniture, not even close
to curtains.
Copyright © 2022, M2Tech Srl
7

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
8

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
2. Front Panel
Figure 1
1) IR receiver. Aim the remote control to this point to send commands to the Evo Phono 3.
2) Power on/power off/Input select button. Press this button to switch the Evo Phono 3
on when it’s off. When the Evo Phono 3 is on, a short press will change the selected input.
A more prolonged press while the Evo Phono 3 is on will cause it to switch off.
) MC step-up gain. These LED’s indicate the gain in dB applied to the MC step-up. This
gain adds to the MM stage gain and it’s only relevant when the MC input is selected.
4) Input and subsonic filter LED’s. Indicate the selected input and whether or not the
high-pass 16Hz subsonic filter is enabled. The 16Hz LED also indicates the stand-by
status when it’s the only one on.
5) MM gain. These LED’s indicate the selected MM stage gain. As the signal always
passes through the MM stage no matter the selected input, this value is always relevant.
When the MC input is selected, the total gain is the sum of the MM gain and the MC gain.
6) MM input capacitive load. The MM input can be loaded with a capacitive load to
optimize the matching with certain MM cartridges. These LED’s indicate the chosen load..
7) MM gain select / MM subsonic button. Use this button to set the gain of the MM stage
(short press) and to toggle the 16Hz subsonic filter for the MM input (long press). Push this
button together with the MC gain select button to set the MM input capacitive load.
Copyright © 2022, M2Tech Srl
9

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
8) MC gain select / MC subsonic button button. Use this button to set the gain of the
MC step-up (short press) and to toggle the 16Hz subsonic filter for the MC input (long
press). Push this button together with the MM gain select button to set the MM input
capacitive load.
Copyright © 2022, M2Tech Srl
10

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
. Back Panel
Figure 2
9) Chassis post. Connect earth wire from the turntable. You might also use this post to
connect the Evo Phono 3 to earth if some hum is heard when listening to records. Gold-
plated post.
10) MC input impedance pot. Set the MC input impedance to the value recommended by
the cartridge’s user manual. Please note that if the cartridge’s internal impedance Z is
indicated, a good setting for this pot is 10-20 times Z.
11) MC input. Connect a low output cartridge. Gold plated RCA socket.
12) MM input. Connect a medium-to-high output cartridge or a step-up transformer for a
low-output MC cartridge. Gold plated RCA socket.
1 ) Output. Connect to any line-level input of an integrated amplifier or preamplifier. Do
NOT connect to a phono input. Gold plated RCA socket.
14) Power supply input. Connect the connector from the stock 1 V adaptor or from the
Evo Supply 3 or M2Tech Van Der Graaf MkII. . /2.1mm barrel jack with positive on tip.
Copyright © 2022, M2Tech Srl
11

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
12

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
4. Remote Control
The Evo Phono 3 comes with a fully-loaded remote control which
allows for setting various controls, as well as for controlling other
M2Tech Rockstars series products.
Please note when a command is sent to the Evo Phono 3 the
“PHONO” key blinks in green. If any of the other key “AMP”,
“DAC” or “PLAYER” blinks instead, the Evo Phono 3 will not
receive the command. In this case, press the “PHONO” key to
select the right commands codes for the Evo Phono 3.
Below is a brief description of the relevant keys for the Evo
Phono 3.
Standby key: This allows for putting the Evo Phono 3 in standby
mode (prolonged push) and for awakening it.
DIM: Display dimming.
PHONO: Instructs the remote to send commands using the
Phono system code.
IN+/IN-: Input selection.
Figure 3
Copyright © 2022, M2Tech Srl
13

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
14

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
5. Connecting and Powering the Unit
WARNING: All connections between the Evo Phono 3 and other equipment must be
made when all units are turned off and completely powered down or unplugged.
Failing to do so may cause damage to the Evo Phono 3 and/or other units.
Please refer to chapter 3, “Back Panel”.
Connect the cable from the turntable to one of the input pairs (Figure 2, 11-12). When two
turntables or a turntable provided with two arms is used, both inputs can be used.
Connect the Evo Phono 3 output pair to a pair of inputs on an integrated amplifier or
preamplifier (Figure 2, 13).
Connect the plug from the stock wall wart or from the Evo Supply 3 to the Evo Phono 3
power input (Figure 2, 14).
Connect the wall wart or the Evo Supply 3 to a mains outlet. The former will automatically
accept any voltage from 90VAC to 26 VAC.
Switch the Evo Phono 3 on by pushing the left front panel button (Figure 1, 2). If you’re
using the Evo Supply 3, you have to activate the output used to power the Evo Phono 3
first.
NOTE: it is possible to use a dedicated low noise power supply in place of the wall
wart, to increase the sonic performance Manunta by M2Tech provides a device for
this purpose, the Evo Supply 3. M2Tech’s Van Der Graaf MkII can also be used. Should
the user opt for use of power supply not provided by Manunta by M2Tech or M2Tech,
we reserve the right to void the Evo Phono 3 warranty
Copyright © 2022, M2Tech Srl
1

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
16

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
6. Cleaning the Unit
The Evo Phono 3 should be cleaned with a soft, slightly damp cloth. Do not use alcohol or
any other types of cleaning fluids as they could damage the unit.
Avoid fluids from dropping or leaking inside the unit. Fluids of any type poured into the unit
will void your warranty.
Copyright © 2022, M2Tech Srl
17

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
Copyright © 2022, M2Tech Srl
18

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
7. Using the Evo Phono 3
At activation, the Evo Phono 3 performs a routinary check for all indicators, then it sets
idle ready for commands.
7.1. Gain Settings
Due to the structure of the signal chain, the MM stage gain and the MC step-up gain can
be set independently. The MC gain is indicated by the LED’s to the left of the front panel.
The MM stage gain is indicated by the 3 LED’s to the lower right of the front panel.
NOTE: Please remember that the MC step-up gain adds to the MM stage gain when
the MC input is selected.
NOTE: When the MM input is selected, all LED’s to the left of the front panel are off,
because MC step-up gain is not relevant for the MM input.
The MM gain is sufficient to accommodate every MM and medium-to-high MC cartridge,
including most of the moving iron and moving flux models which work well when loaded
with 47k Ohms. Choose 40dB when using most MM cartridges. 2dB are suitable for 1mV
output cartridges, while 46dB can be chosen for 2. mV output cartridges. The setting also
depend on the preamplifier sensitivity.
Setting the MC gain requires operating on both the MM gain and the MC gain. If a total MC
gain of 60dB is required, set the MM gain to 40dB and the MC gain to 20dB.
NOTE: Please note that the MM gain set for the MC input doesn’t affect the MM gain
set for the MM input and vice versa. This is useful when two cartridges are
connected to the Evo Phono 3 at the same time.
7.2. MC Input Load Impedance
The Evo Phono 3 is provided with a knob on the back panel which allows for setting the
MC input load impedance between 10 Ohms and 1000 Ohms (Figure 2, 10). This range
covers all the low and medium output MC cartridges requirements.
Please set the knob to the appropriate value as indicated by the cartridge’s user manual. If
this value is not found on the manual, a good rule of the thumb is to set the load
impedance to 10 times the cartridge’s internal or output impedance.
NOTE: Too low or too high a value with regards to the recommenced loading value
will not harm either the cartridge and the Evo Phono 3; anyway it will impair the
sound quality, particularly in the treble range.
NOTE: Please note this setting only affects the MC input, the MM input’s load
impedance is always 47k Ohms.
Copyright © 2022, M2Tech Srl
19

MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION PRA – November 2022
7. . MM Capacitive Load
MM Cartridges often give the optimum performance when loaded with a capacitive load.
The Evo Phono 3 allows for setting the MM input capacitance to 0pF, 100pF, 220pF or
320pF. To set the capacitance value, press the two right buttons together until the desired
value is indicated by the 2 LED’s to the upper right of the front panel.
As this setting is only relevant for MM input, these two LED’s are off when the MC input is
selected.
7.4. Subsonic filter
Warped records and turntable resonances may, under certain circumstances, drive the
power amplifier to overload, even at normal listening levels, due to low-frequency
oscillations which, while inaudible, cause the power amplifier to deliver high power to the
speakers.
In order to attenuate this phenomenon, the Evo PHONO 3 is provided with a 16Hz high
pass filter which strongly reduces the infrasonic signal from the cartridge, while allowing
the full content of the music program to be amplified and passed to the preamplifier.
The subsonic filter can be independently set for MM and MC inputs by using the related
gain button with a long press.
Copyright © 2022, M2Tech Srl
20