2
Original Version 1-2011
Table of contents
1. General information.....................................................................................................................4
1.1. Introduction.......................................................................................................................................4
1.2. The machine's purpose of use...........................................................................................................4
1.3. Machine model and basic information .............................................................................................4
1.4. Operating conditions.........................................................................................................................5
1.5. Safety instructions.............................................................................................................................5
1.6. Noise and vibration ...........................................................................................................................5
1.7. Warning symbols...............................................................................................................................6
2.0 Reception and assembly....................................................................................................................8
2.1 Reception inspection.........................................................................................................................8
2.2 Lifting and moving the machine........................................................................................................9
2.3 Main components of the machine ..................................................................................................10
2.4 Preparing the machine for operation..............................................................................................11
3.0 Control functions and preparation ..............................................................................................15
3.1 Arranging the machine for operation and transport ......................................................................15
3.2 Placing the input conveyor in the operating or transport position ................................................16
4.0 Control devices...........................................................................................................................20
4.1 Tractor drive.................................................................................................................................21
4.2 Electrical drive..............................................................................................................................22
4.3 Adjusting the log length and the height of the splitting blade ....................................................24
4.4 Operating and adjusting the output conveyor ............................................................................25
4.5 Using the blade chain's oil adjuster .............................................................................................27
4.6 Operating and adjusting the input conveyor...............................................................................28
4.7 Using the input conveyor guard and wood press ........................................................................30
5.0 Operating the machine ..............................................................................................................32
5.1 Test running the machine ....................................................................................................................32
5.2 Placing wood on a log holder ..........................................................................................................32
5.3 Feeding and sawing wood...............................................................................................................33
5.4 Jamming the cutting blade ..............................................................................................................34
5.5 Sawing the last log...........................................................................................................................34
5.6 Splitting wood..................................................................................................................................35
5.7 Jamming wood on the splitting blade .............................................................................................36
5.8 Re-splitting or splitting without cutting ..........................................................................................36
