Product Installation and functionM72 Mouse operating instruction manual
User Manual
Product Parameter
The mouse is not responding to movement or clicks:
①
②
③
Troubleshooting
Product List
Button layout
Left button
Forward button
Back button
Right button
Middle button
DPI Switch On-Off
Receiver Storage Slot
Model M721
Dual Mode Mouse M722
Dual Mode Mouse
Connectivity Wired+ 2.4G Wireless
Sensor Pixart 3325
Wired+ 2.4G Wireless
Pixart 3335
DPI 10000 DPI 16000 DPI
Polling Rate 1000Hz 1000Hz
Lighting 16.8 Million RGB
Battery 1000mAh 1000mAh
Driver Support Yes
Size 125/59/37mm 125/59/37mm
Weight 95g±5g 95g±5g
Standard GB/T 14081-2010
16.8 Million RGB
Yes
SERIES
Please read the instructions carefully before using this
product and keep it well for reference.
Feature
*Sports car-style design with inspiration from front and rear
car lights.
*Cool light strip at the bottom of the mouse, satisfying
individual needs.
*Pixart game-level sensor to use various game.
1.Wireless Connection
a.Take out the 2.4g receiver on the back of the mouse and plug it into
b. the USB port on your computer.
b.Flip the mouse switch to ON.
2.Wired Connection
Connect the Type C interface of the data cable to the mouse interface,
and connect the other end of the USB port to the computer to
complete the connection.
4.Lighting Adjusting
a.Back Button+ Middle Button : Switch lighting mode
More light modes and parameter can be adjusted in the drive,
please visit https://global.machenike.com/ to download
It may be that the receiver is not properly connected to the USB port
on the computer. Try removing the receiver and inserting it back into
the USB port on the computer again.
If the mouse switch is in the o position, you can switch it on by
toggling the switch at the bottom of the mouse.
If the mouse moves too slowly or too quickly, it may be due to a
mismatch between the DPI settings and personal preferences.
Adjust the DPI to suit personal preferences.
If there are any problems that cannot be resolved, do not disassem-
ble the mouse on your own, please contact the seller for assistance.
If the charging cable or adapter is lost, you can contact the seller to purchase.
If the mouse switch is in the o position, you can switch it on by
toggling the switch at the bottom of the mouse.
Mouse*1
Receiver*1
USB Cable*1
User Manual*1
3.DPI Adjusting
a.Press the bottom DPI button to complete the DPI switch
b.M721 Mouse DPI Date: 800(Blue)-1600(Red)-
2400(IceBlue)-3200(Green)-4000(Purple)-5000(Yellow)-10000(White)
M722 Mouse DPI Date: 800(Red)-1200(Green)-1600(Cyan)-2400(Blue)-
3200(Yellow)-6400(Pink)-12800(White)-16000(Orange)
1 2 3
AS COOL
AS YOU ARE
