Mackie TT24 Quick start guide

ADC
48V
Analog Channels 1-24
MIC
LINE
Gain
+
-
Mic: 0 to +60 dB
Line: Ð20 to +40 dB
2
3
1
INSERT
Clip
Sig
Line Input 1 (=Line Input 2-8)
LINE
ADC
+
-
2
3
1
LEFT OUT
RIGHT OUT
CTR/MONO
OUT
1
2
3
1
2
3
+
–
+
–
1
2
3
+
–
2
3
1
PHONES
MONITOR L
MONITOR R
CUE
+
AUX SEND 2
GROUP/MATRIX
OUT 1
(=Group/Matrix 2-8)
1
2
3
+
–
+
-
+
-
2
3
1
MACKIE
TT24: STEREO+MONO MODE
BLOCK DIAGRAM
(#070604_GJ/DF)
AUX SEND 1
Phase Gate 4-Band
Para EQ
High Pass
Channel Processing Analog Channel 1
(=Analog 2-24)
Optional Stereo Link in Pairs
All processing parameters linked, and true stereo compression.
Fader
Grp 1
(= Grp 2-8)
Main Out
LRCLR
PFL Solo AFL Solo
LR
LR Assgn
C Assgn
Pan
Mute
Fader
Aux 1 (=Odd#Aux)
Pre/Post
Solo
Fader
Pre/Post
Aux 2 (=Even#Aux)
Pan
Matrix 1
(= Matrix 2-8)
Fader
Fader
4-Band
Para EQ
Solo
Solo
DAC
Matrix Active
(ganged)
To internal FX
and UFX-II
Solo
DAC
Channel 1 Level, Pan & Group Assign
(=Analog 1-24, Digital 1-24, Line input 1-8, IFX Ret 1-8,
Slot A Ret 1-8)
Digital Channels 13-24 @96kHz
ADAT
IN (x3)
To Level, Pan & Group Assign
Fader
Fader
DAC
DAC
DAC
SPDIF IN
AES/EBU IN
Monitor Sel and any Digital Insert Return
TAPE-A IN L ADC
Monitor Sel
ADC
TAPE-B IN L
Digital Channels 1-24 @48kHz, 1-12 @96kHz
ADAT
IN (x3)
ADAT 1 (= ADAT 2-24)
SPDIF OUT
AES/EBU OUT
TAPE-A OUT L
DAC
TAPE-A OUT R
DAC
TALKBACK
MIC
ADC
DAC
DAC
Digital Channels 13-24 @96kHz
Digital Channels 1-24 @48kHz, 1-12 @96kHz
ADAT
OUT (x3)
M
Digi Insert
Digi Insert
Digi Insert
Digi Insert
Digi Insert
Digi Insert
Digi InsertDigi Insert
Solo
Control
AFL/PFL
Monitor
Sel
TX
RX
TAPE-A IN R ADC
Monitor Sel
ADC
TAPE-B IN R
Monitor Sel
Monitor Sel
Monitor Sel and any Digital Insert Return
Stereo
Select
Digi In L
Tape-A In L
Tape-B In L
Digi In R
Tape-A In R
Tape-B In R
Digi I/O
is Insert
Digi Insert Send
Digi Insert Send
Grp 1Assgn
(=Grp 2-8)
Aux 1 Assgn
(=Odd#Aux)
Aux 2 Assgn
(=Even#Aux)
Matrix 1 Assgn
(=Mat 2-8)
Analog Ch1 Pre-Processing
Analog Ch1 Post-Processing
Digital Out Select
(ganged)
ADAT 1
Internal Effects
Processor
(IFX)
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
Note: Only one Aux channel (mono
or stereo) can be solo'd at once.
Slot A only
MACKIE TT24 BLOCK DIAGRAM
COPYRIGHT 2004, LOUD TECHNOLOGIES INC.
ALL RIGHTS RESERVED
or
Slot B only
(with UFX-II
or I/O as Effects
Processors)
To Level, Pan & Group Assign
Slot A only
or
Slot B only
(with Audio
Network Card)
24 Signals
(e.g. Replace built-in inputs
Analog 1-24 or Digital 1-24,
replace ouptuts, send to
Digital out, digi inserts, etc.)
24 Signals - Selectable
(e.g. Analog 1-24 pre- or
post-processing, Digital1-
24 outputs, digi inserts etc.)
Pan
LR Assgn
C Assgn
Fader
Solo
SRC
SRC
Bypass
Reversible
Fader
Fader
Movable
Mono
Group
Mute
Mute
Optional Stereo Link in Pairs
All controls directly linked, but pans linked inversely, with initial setting of full L
on odd channel, and full R on even channel (same applies to aux send pan).
LR Assgn
Stereo Level
To Level, Pan & Group Assign
3-Band
Para EQ
Line Input 1 Processing
(=Line Input 2-8)
Optional Stereo Link in Pairs
All processing parameters linked.
4-Band
Para EQ
4-Band
Para EQ
4-Band
Para EQ
Comp
Comp
Comp
Comp
Comp Soft Clip
Soft Clip
Soft Clip
Soft Clip
Soft Clip
ADAT
OUT (x3)
Analog Ch13 Pre-Processing
Analog Ch13 Post-Processing
ADAT 13
+
Trim
4-Band
Para EQ
Comp
+
Mute
Fader
4-Band
Para EQ
Mute
Comp
Solo
LR Assgn
Stereo
Group
Group 1 Mono
Group/Matrix Out 1 (=Group/Matrix Out 2-8)
Aux Send 1 (=Odd#Aux Send 3,5,7,9,11)
Grp 1 Mono
Group 1 as Stereo (=Group 2-8 as Stereo)
Grp 1 L
Grp 1 R
Grp 1 Mono
Group 1 as Mono (=Group 2-8 as Mono)
Grp 1 Type
(=Grp 2-8) Note: A maximum of 8 channels of processing can be assigned at once accross all
groups. Mono = 1 channel, Stereo = 2 channels.
Assignable Processing
Assignable Processing
Mono Aux 1 Processing (=Aux 2-8)
Stereo Aux 1/2 Processing (=other Aux pairs as stereo)
Group 1 Mono (default)
or From a Matrix+ selection
Group 2 Mono (default)
or From a Matrix+ selection
Group 3 Mono (default)
or From a Matrix+ selection
Group 4 Mono (default)
or From a Matrix+ selection
Group 5 Mono (default)
or From a Matrix+ selection
Group 6 Mono (default)
or From a Matrix+ selection
Group 7 Mono (default)
or From a Matrix+ selection
Group 8 Mono (default)
or From a Matrix+ selection
Main L (default)
or From a Matrix+ selection
Main R (default)
or From a Matrix+ selection
Main C (default)
or From a Matrix+ selection
To Matrix
Matrix+ Selections:
Any Grp Mono, L, R;
Main Out L, R, C;
Analog/Digitla/Line
Channel Pre/Post Fader;
Stereo L /R pre/post
fader.
Matrix Channel 1 (=Matrix 2-8)
ADAT 13 (= ADAT 14-24)
ADAT I/O Expansion Card in Slot A or B
Slot A
and/or
Slot B
(with UFX-II
or I/O as
Inserts)
Digi Insert Send Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
Note: There are only 2 expansion Slots: Slot A and Slot B. UP to 2 network cards installed
(max 1 as network, max 1 as console linker), maximum of 1 UFX-II card or I/O card
configured for effects returns, maximum of 1 ADAT card installed as 96kHz digital
channels 13-24.
Up to 2 UFX-II or I/O cards configured for inserts.
ADAT I/O Expansion Card in Slot A or B
From Talkback
Trim
LR
Solo
Meter
Meter
Meter
C
L
R
Delay
Note: Matrix only available when activate.
Meter
Pan
RL21
Linked if
Aux 1/2
is stereo
To internal FX
and UFX-II
DAC
Soft Clip
Aux Send 2 (=Even#Aux Send 4,6,8,10,12)
Meter
Aux 1 Mono
Aux 1/2 Stereo L
Aux 1/2 Stereo R
Mono/Stereo
Link
Aux 1 Mono
Aux 2 Mono
Meter
Meter
Meter
Meter
Meter
Aux 1/2
(= Aux 3-12 in
pairs)
Linked if
Aux 1/2
is stereo
Linked if Aux
1/2 is stereo
Delay only available if
matrix active.
C Assgn
Sig/Clip
LEDs
Meter
Meter
Solo
Level
+Dual
Kill Filter
+Dual
Kill Filter
+Dual
Kill Filter
+Dual
Kill Filter
Digi Insert
To Level, Pan & Group Assign
Digi Insert
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Digi Insert
Digi Insert
To internal FX
and UFX-II
(only availble if
matrix active)
Reversible
Reversible
Reversible
Reversible
+
Mute
Mono
to Mains
Matrix 1
Talk

Phase Gate 4-Band
Para EQ
High Pass
Channel Processing Analog Channel 1
(=Analog 2-24)
Optional Stereo Link in Pairs
All processing parameters linked, and true stereo compression.
Fader
Grp 1
(= Grp 2-8)
Main Out
LRCLR
PFL Solo AFL Solo
LR
LR Assgn
NOT C
C Assgn
NOT LR
Pan
Mute
Fader
Aux 1 (=Odd#Aux)
Pre/Post
Solo
Fader
Pre/Post
Aux 2 (=Even#Aux)
Pan
Matrix 1
(= Matrix 2-8)
Fader
Fader
4-Band
Para EQ
Solo
Solo
DAC
Matrix Active
(ganged)
To internal FX
and UFX-II
Solo
AUX SEND 1
DAC
Channel 1 Level, Pan & Group Assign
(=Analog 1-24, Digital 1-24, Line Input 1-8, IFX Ret 1-8,
Slot A Ret 1-8)
Digital Channels 13-24 @96kHz
ADAT
IN (x3)
Line Input 1 (=line Input 2-8)
To Level, Pan & Group Assign
ADC
Fader
Fader
DAC
DAC
DAC
SPDIF IN
AES/EBU IN
Monitor Sel and any Digital Insert Return
TAPE-A IN L ADC
Monitor Sel
ADC
TAPE-B IN L
Digital Channels 1-24 @48kHz, 1-12 @96kHz
ADAT
IN (x3)
ADAT 1 (= ADAT 2-24)
SPDIF OUT
AES/EBU OUT
TAPE-A OUT L
DAC
TAPE-A OUT R
DAC
TALKBACK
MIC
ADC
DAC
DAC
PHONES
MONITOR L
MONITOR R
Digital Channels 13-24 @96kHz
Digital Channels 1-24 @48kHz, 1-12 @96kHz
ADAT
OUT (x3)
M
Digi Insert
Digi Insert
Digi Insert
Digi Insert
Digi Insert
Digi Insert
Digi InsertDigi Insert
Solo
Control
AFL/PFL
Monitor
Sel
TX
RX
TAPE-A IN R ADC
Monitor Sel
ADC
TAPE-B IN R
Monitor Sel
Monitor Sel
Monitor Sel and any Digital Insert Return
Stereo
Select
Digi In L
Tape-A In L
Tape-B In L
Digi In R
Tape-A In R
Tape-B In R
Digi I/O
is Insert
Digi Insert Send
Digi Insert Send
Grp 1Assgn
(=Grp 2-8)
Aux 1 Assgn
(=Odd#Aux)
Aux 2 Assgn
(=Even#Aux)
Matrix 1 Assgn
(=Mat 2-8)
Analog Ch1 Pre-Processing
Analog Ch1 Post-Processing
Digital Out Select
(ganged)
ADAT 1
Internal Effects
Processor
(IFX)
Select Aux1-12/Matrix1-8
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
Note: Only one Aux channel (mono
or stereo) can be solo'd at once.
Slot A only
or
Slot B only
(with UFX-II
or I/O as Effects
Processors)
Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign
Slot A only
or
Slot B only
(with Audio
Network Card)
24 Signals
(e.g. Replace built-in inputs
Analog 1-24 or Digital 1-24,
replace ouptuts, send to
Digital out, digi inserts, etc.)
24 Signals - Selectable
(e.g. Analog 1-24 pre- or
post-processing, Digial 1-
24 outputs, digi inserts etc.)
LCR
LR AND C
Assgn
Pan
LR Assgn
only
C Assgn
only
LR and C
Assgn
Fader
Solo
SRC
SRC
Bypass
Reversible
Fader
Fader
Movable
Mono
Group
Mute
Mute
Optional Stereo Link in Pairs
All controls directly linked, but pans linked inversely, with initial setting of full L
on odd channel, and full R on even channel (same applies to aux send pan).
To Level, Pan & Group Assign
3-Band
Para EQ
Line Input 1 Processing
(=Line Input 2-8)
Optional Stereo Link in Pairs
All processing parameters linked.
4-Band
Para EQ
4-Band
Para EQ
4-Band
Para EQ
Comp
Comp
Comp
Comp
Comp Soft Clip
Soft Clip
Soft Clip
Soft Clip
Soft Clip
ADAT
OUT (x3)
Analog Ch13 Pre-Processing
Analog Ch13 Post-Processing
ADAT 13
CUE
+
Trim
4-Band
Para EQ
Comp
+
+
Mute
Fader
4-Band
Para EQ
Mute
Comp
Solo
LR Assgn
Stereo
Group
Fader
4-Band
Para EQ
Mute
Comp
Solo
LR+C
Assgn
LCR
Group
Grp 1 Mono
Group 1 Mono
Group/Matrix Out 1 (=Group/Matrix Out 2-8)
Aux Send 1 (=Odd#Aux Send 3,5,7,9,11)
Group 1 as LCR (=Group 2-8 as LCR)
Grp 1 Mono
Group 1 as Stereo (=Group 2-8 as Stereo)
Grp 1 L
Grp 1 R
Grp 1 L
Grp 1 C
Grp 1 R
Grp 1 Mono
Group 1 as Mono (=Group 2-8 as Mono)
Grp 1 Type
(=Grp 2-8) Note: A maximum of 8 channels of processing can be assigned at once across all
groups. Mono = 1 channel, Stereo = 2 channels, LCR = 3 channels.
Assignable Processing
Assignable Processing
Assignable Processing
Mono Aux 1 Processing (=Aux 2-8)
Stereo Aux 1/2 Processing (=other Aux pairs as stereo)
Group 1 Mono (default)
or From a Matrix+ selection
Group 2 Mono (default)
or From a Matrix+ selection
Group 3 Mono (default)
or From a Matrix+ selection
Group 4 Mono (default)
or From a Matrix+ selection
Group 5 Mono (default)
or From a Matrix+ selection
Group 6 Mono (default)
or From a Matrix+ selection
Group 7 Mono (default)
or From a Matrix+ selection
Group 8 Mono (default)
or From a Matrix+ selection
Main L (default)
or From a Matrix+ selection
Main R (default)
or From a Matrix+ selection
Main C (default)
or From a Matrix+ selection
To Matrix
Matrix+ Selections:
Any Grp Mono, L, R, C;
Main Out L, R, C;
Any Analog/Digitla/Line
Channel Pre/Post Fader;
Stereo L /R pre/post
fader.
Matrix Channel 1 (=Matrix 2-8)
ADAT 13 (= ADAT 14-24)
ADAT I/O Expansion Card in Slot A or B
Slot A
and/or
Slot B
(with UFX-II
or I/O as
Inserts)
Digi Insert Send Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Return
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
Digi Insert Send
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
To Level, Pan & Group Assign
Note: There are only 2 expansion Slots: Slot A and Slot B. UP to 2 network cards installed
(max 1 as network, max 1 as console linker), maximum of 1 UFX-II card or I/O card
configured for effects returns, maximum of 1 ADAT card installed as 96kHz digital
channels 13-24.
Up to 2 UFX-II or I/O cards configured for inserts.
ADAT I/O Expansion Card in Slot A or B
From Talkback
Trim
LR
Meter
Meter
Meter
C
L
R
Delay
Note: Matrix only available when activate.
Meter
Pan
RL21
Linked if
Aux 1/2
is stereo
To internal FX
and UFX-II
AUX SEND 2
DAC
Soft Clip
Aux Send 2 (=Even#Aux Send 4,6,8,10,12)
Meter
Aux 1 Mono
Aux 1/2 Stereo L
Aux 1/2 Stereo R
Mono/Stereo
Link
Aux 1 Mono
Aux 2 Mono
Meter
Meter
Meter
Meter
Meter
Aux 1/2
(= Aux 3-12 in
pairs)
Linked if
Aux 1/2
is stereo
Linked if Aux
1/2 is stereo
Delay only availble if
matrix active.
Meter
Meter
Solo
Level
Sig/Clip
LEDs
+Dual
Kill Filter
+Dual
Kill Filter
+Dual
Kill Filter
+Dual
Kill Filter
Digi Insert
To Level, Pan & Group Assign
Digi Insert
Digi Insert
Digi Insert
To internal FX
and UFX-II
(only availble if
matrix active)
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
Select Aux1-12/Matrix1-8
LR Assgn
Stereo Level
Solo
+
Mute
Mono
to Mains
Reversible
Reversible
Reversible
Reversible
Reversible
Matrix 1
Talk
ADC
48V
Analog Channels 1-24
MIC
LINE
GAIN
+
-
Mic: 0 to +60 dB
Line: Ð20 to +40 dB
2
3
1
INSERT
Clip
Sig
LINE
+
-
+
-
2
3
1
+
-
MACKIE
TT24: LCR MODE
BLOCK DIAGRAM
(#070604_GJ/DF)
LEFT OUT
RIGHT OUT
CTR/MONO
OUT
1
2
3
1
2
3
+
–
+
–
1
2
3
+
–
2
3
1
GROUP/MATRIX
OUT 1
(=Group/Matrix 2-8)
1
2
3
+
–
2
3
1
MACKIE TT24 BLOCK DIAGRAM
COPYRIGHT 2004, LOUD TECHNOLOGIES INC.
ALL RIGHTS RESERVED