Macostar MacoLEDs R8/22-200C User manual

R
LED Profile Spotlight
Product Name
Product Models
Macostar Hong Kong Ltd.
MAC OSTA R HON G KON G LTD
2/F.,Union Industrial Bldg.,48 Wong Chuk Hang Road,Hong Kong.
Tel:[phone] Fax:[phone] Enail:[e-mail]
Website:www.macostar.com
Macotar reserve the right to change the specification with our prior notice.
MacoLEDs R8/22-200C
MacoLEDs R18/36-200C
MacoLEDs R30/55-200C
MacoLEDs R8/22-200W
MacoLEDs R18/36-200W
MacoLEDs R30/55-200W
Manual No:540-F1B0-10w

1.
2.Product features
3.Technical indexes
4.Operational features
5.Operation and indication module
6.Definition of terminals
Identifying the parts
CONTENTS
2
3
Page 1 / 7
Operation Manual
3
3
4
7

1. Identifying the parts
Page 22 of 22
Page 2 / 7
Operation Manual
Page 7 / 7
Operation Manual
6. Definition of terminals
1
234
51
2
3
4
5
Safety rope
Control panel
2.8inch LCD display
Power input
Power switch
Handle
Manual knob
DMX output
(XLR5-pin female)
DMX input
(XLR5-pin male)
Fuse
LED Profile Spotlight
NOTE:Prior to powering the device ,Check power supply voltage and
nominal value of the fuse is consistent with the manufacturer’s identification vaule.
220Vac
Black
Gray
110Vac

Page 3 / 7
Operation Manual
3. Technical indexes
Input voltage
Working frequency
Normal ambient temp
Max output power
Dimension(mm)
Weight (kg)
100V~240VAC
50HZ/60HZ
0－35℃
100W/200W
(W）*（L）*（H）
4. Operational features
When using this product, you are recommended to follow this procedure: connect
the lamp to a power source, connect the lamp to a DMX signal line, turn the power switch
to "ON" position, and by now, the lamp enters into working state. If the interface displays
a DMX icon, you can use the console to control dimming, and if the interface displays a
Manual icon, you can directly rotate the encoder for light adjustment. In manual mode,
when you press the button you will exit dimming control and enter menu selection.
In addition to the DMX address for dimming control, dedicated DMX control
channels can be chosen for display duration of the LCD screen, LED light source module
protection, fan speed selection, built-in effects control. Such DMX values of different
channels can be set differently, through the control panel.
Factory defined configuration can be found in the following table:
Page 22 of 22
Page 6 / 7
Operation Manual
4). Selection LCD display duration:
When the LCD display duration icon is highlighted, press the button, and enter
address modification for display duration. If you want to change it, you can rotate the
encoder to the desired address value, and press the button to get option. If you want
to save the address value, press the Esc option to return to the first level menu;
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
5. Select light source module protection mode:
When the Live or Safe icon is highlighted, press the desired button to enter address
modification of control mode. If you want to modify it to the desired address, rotate the
encoder to the desired value, press the button and get the
button to save the settings and return to the first level menu.
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
Note: In Safe mode, the output brightness of the lamp will be restricted if
temperature of the LED light source module is over 65 centigrade degrees. Output
brightness will become less when the temperature is higher. When the temperature
reaches 75 centigrade degrees, output is “0”.
In Live mode, the output brightness of the lamp is “0” if the temperature of the LED
light source module reaches 90 centigrade degrees.
6). Select fan speed:
When the fan speed icon is highlighted, press this button to enter address
modification of fan speed. If you want to modify it to the desired address, rotate the
encoder to the desired value, press the button and get the
Option. Press the Esc
Option. Press the Esc
button to save the settings and return to the first level menu.
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
Note: if temperature of the LED light source module is over 35 centigrade degrees,
the fan is turned on.
7). Select scene effects:
When the scene effect icon is highlighted, press this button to enter address
modification of scene effect. If you want to modify it to the desired address, rotate the
encoder to the desired value, press the button and get the
If you want to select any other option, just press the button, and the control address
is then changed to “0” and the selected function character is displayed. Press the Esc
button to save the settings and return to the first level menu.
Option. Press the Esc
Button to save the settings and return to the first level menu.
ESC
EVER
30S
1Min
2Min
3Min
ESC
Live
Safe
ESC
Auto
Speed1
Speed2
Speed3
Speed4
ESC
Ef fe ct1
Ef fe ct2
Ef fe ct3
Ef fe ct4
Ef fe ct5
Model
Maco LEDs
R8/22-200C R18/36-200C R30/ -200C55 R8/22-200W R18/ -200W36 R30/ -200W55
907*400*334 763*400*334 643*400*334 907*400*334 763*400*334 643*400*334
14.6 13.8 13.5 14.6 13.8 13.5
2. Product features
The light source module of Macostar series LED lamps can be set to different power
levels (100W or 200W ) and different color temperature levels (3200K or 5600K ),
according to different needs. The light source module is composed of a built-in PWM
power supplier, which provides working power supply. The output brightness can be
regulated through the DMX-512 signal controller, or through the manual dimmer knob.
Along with the power-down memory function.

001
Status
LCD
DISP LAY
ON
Brightness
DMX
Di m
Addre ss
1). Press the encoder button, firstly select the dimming address menu item (the icon
is then highlighted) , and then rotate the encoder to select the control menu of options;
2). Select and modify the dimming address:
When the dimming address icon is highlighted, press the encoder button. Then the
highlighted icon changes color, which indicates that the address can be modified now.
Rotate the encoder, the address changes with each rotation (scope of dimming address: 1-
512). Press again this button, and the address is saved and returns to the above menu;
3). Select between console dimming and manual dimming:
When the console dimming or the manual dimming icon is highlighted, press the
encoder button, an icon of option pops up on the interface. If you want to select
console dimming, you should select DMX, then press this button again to save settings
and return to the first level menu. If you want to select manual dimming, please rotate the
encoder to “Manual”, press this button and an option shall appear (STD：0－
100 pulse; Fine：０－255 pusle) in correspondence to 0-100%. Select one option, press
it, and rotate the encoder to manually dim. If you want to exit, just press this button again
to save the settings and return to the first level menu.
Page 22 of 22
Page 4 / 7
Operation Manual
Page 5 / 7
Operation Manual
5. Operation and indication modules
5.1 Control Panel
The control panel is composed by display unit and operation unit as shown below.
1).Selection of dimming control DMX address;
2).Console or manual dimming;
3).Selection of LCD display standby;
4).Selection of light source module protection mode;
5).Selection of fan speed;
6).Selection of scene effects;
7).Display of the selected DMX address;
8).Display of the DMX control values;
9).Selection of functions under control menu;
10).Display of temperature and Fahrenheit temperature.
5.2 Illustration on operations
Temprature
Dimming address
Dimming mode
LCD display on time
Patch address
Fan speed
Status bar
Preloaded effect
Live show mode
ON
Resume default settings
ESC
DMX
Manual
ESC
STD
Fine