Magellan RoadMate 3000T - Automotive GPS Receiver User manual

Magellan®TrafficKit™
Installation Instructions
©2006 Magellan Navigation, Inc. All rights reserved. The Magellan logo, Magellan, Magellan RoadMate, TrafficKit and Turn it on and go are trademarks of Magellan Navigation, Inc.
Turn it on and go™
These are the items that you will need to install your
TrafficKit: (a) TrafficKit Receiver, (b) Magellan
RoadMate Receiver and (c) TrafficKit FM Antenna.
1.
a
c
b
Locate the TrafficKit Receiver.
2.
Connect the TrafficKit Receiver to the right side of the
Magellan RoadMate as indicated.
3.
Next, locate the FM Antenna.
4.
Plug the FM Antenna into the TrafficKit Receiver.
Make sure you push the connector all the way.
5.
Attach the Cigarette Lighter Adapter to the
T
rafficKit Receiver.
6.
Attach the cradle and mount to the Magellan
RoadMate 3000T.
7.
Mount the assembly in your vehicle using the method
desired (windshield, adapter plate or other). Attach
the FM antenna to the vehicle’s windshield using the
suction cups. The antenna should be placed in an
area where it will be able to receive traffic signals.
8.
Make sure you have the power cable looped into the
stress relief loop as seen here.
9.