Magellan 980824 - Universal Floor Mount User manual

CM088-TS-2
15” Flexible Floor Mount
Package Contents:
(1) CM088-TS-2 - 15” Flexible steel gooseneck oor or console mount
Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4) Screws,
(4) Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing
(1) APMM300 - Dual-T pattern adapter plate
Required Tools for Installation:
1. Socket wrench
2. Drill and screwdriver for optional oor or console mounting
Floor Mount
Console Mount
Screw the exible steel shaft into the seat track bolt bracket.
With a socket wrench, loosen the passenger seat track bolt,
insert the seat track bolt bracket, and retighten the seat
track bolt.
Step 1.
Step 2.
Position the Floor / Console Bracket and drill into the oor
or console.
Attach the Floor / Console Bracket with screws and cover
with plastic caps.
Screw the steel shaft into the Floor / Console Bracket.
Step 1.
Step 2.
Step 3.
Adjust the steel shaft by bending with both hands to the
desired location of the male dual T head.
Use the adjustment knob and wing nut on the pedestal
head to swivel or rotate the head position if necessary.
Step 1.
Step 2.
Passenger Seat Bolt Mounting
Floor or Console Mounting
For a more permanent mount, connect the Floor / Console Mount
Bracket to the oor or console. This will require drilling into your
vehicle’s interior surface.
Pedestal Head Adjustments
Continued on next column...
Continued on other side...
For a simple mount that can be easily moved to another vehicle,
install using the passenger seat track bolt.
Patent Pending
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2009 Arkon Resources, Inc.
!Drilling into the dash, oor, or console will permanently damage the
vehicle. Use caution and consult a mobile install professional to avoid
drilling into the gas tank, electrical system or other highly sensitive
vehicle components.
1
2
3
MM325
|Seat Bolt or Floor Mount for Magellan®, Mio®, and Navman® GPS
APMM300
Dual-T Pattern
Adapter Plate
Do not place mount in or near an air bag deployment zone
or where it will obstruct view of the road.
!
All brand names and product names are trademarks or registered trademarks of their
respective owners.
The Mobile Mounting Specialists™
®
Compatible with:
• Magellan Maestro: 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050,
4210, 4215, 4200, 4220, 4245, 4250, 4350, 4370, 4700, 5310, and 5340
• Magellan RoadMate: 1200, 1210, 1212, 1215, 1220, 1230, 1340, 1400, 1412, 1430, 1440,
1470, 1475T, 2000, 2200T, 2250T, 300, 3000T, 3050T, 360, 500, 500 Plus, 6000T, 700, 760,
800, and 860T
• Magellan Triton: 1500, 200, 2000, 300, 400, and 500
• Magellan Crossover: GPS 2500T
• Mio Moov: 300, 301, 310, 330, 330 Europe, 360, 370 Europe, 380, 500, and Knight Rider Ed.
• Navman: S50, S50 3D, S70, S90i

Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2009 Arkon Resources, Inc.
4 7
5
6
AB
Step 1. Attach the device to the pedestal by inserting the dual
T-Tabs on the pedestal head (A) into the T-slots on the
adapter plate (B).
Step 1. Step 1.
Connect Device to Floor Mount
Insert the power cord (not included, sold separately) into the
grooved slot in the bottom of the adapter plate.
Connect Power Cord to Adapter Plate
Step 1.
Connect Adapter Plate to Device
Insert the adapter plate with power cord into the vertical
groove pattern on the back of the GPS device (not included,
sold separately.)
MM325
|Seat Bolt or Floor Mount for Magellan®, Mio®, and Navman® GPS - cont.
The Mobile Mounting Specialists™
®
If your Magellan device has dual-T slots on the back, attach
the GPS unit to the oor mount by connecting the dual
T-slots (C) to the dual T-tabs of the mount head (A).
Dual-T Device Attachment to Floor Mount
A
C