Magic Chef MCWC6B User manual

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING YOUR
WINE COOLER AND KEEP IT FOR FUTURE REFERENCE.
Model MCWC6B
Freestanding Wine Cooler
User’s Manual

Product Registration
Thank you for purchasing a Magic Chef®product. The first step to protect your new product is to complete the product registration on our website:
www.mcappliance.com/register. The benefits of registering your product include the following:
1. Registering your product will allow us to contact you regarding a safety notification or product update.
2. Registering your product will allow for more efficient warranty service processing when warranty service is required.
3. Registering your product could act as your proof of purchase in the event of insurance loss.
Once again, thank you for purchasing a Magic Chef®product.

EN
1
TABLE OF CONTENTS
NAMES OF THE PARTS……………………………………………………… 2
IMPORTANT SAFETY INSTRUCTIONS……………………………………. 3
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR WINE COOLER……………………..…… 3
INSTALLING YOUR WINE COOLER ……………………………… 3
ELECTRICAL CONNECTION………………………………………… 4
OPERATING YOUR WINE COOLER
TEMPERATURE CONTROL………………………………………….. 5
CARE AND MAINTENANCE
CLEANING YOUR WINE COOLER………………………………… 6
VACATION TIME………………………………………………………. 6
MOVING YOUR WINE COOLER…………………………………… 6
ENERGY SAVING TIPS………………………………………………. 6
TROUBLESHOOTING GUIDE………………………………………………. 7-8
WINE COOLER WARRANTY……………………….……………………… 9

EN
2
NAMES OF THE PARTS
MODEL NO. MCWC6B
1. RACKS
2. HINGE
3. RECESSED HANDLE
4. LEVELING LEGS
5. TEMPERATURE SENSOR
6. TEMPERATURE ADJUST KNOB
7. LIGHT
8. LIGHT SWITCH

EN
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock,
or injury when using your wine cooler,
follow these basic precautions:
Read all instructions before using the wine cooler.
Never clean wine cooler parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other wine cooler. The fumes can create a fire hazard or an explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Wine cooler
Remove the exterior and interior packing.
Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 6)
Installing Your Wine cooler
This appliance is designed to be free standing only, and should not be recessed or built-in.
Allow 5 inches of space between the back and sides of the wine cooler, which allows the proper
air ventilation. Adjust the legs to keep the wine cooler level.
Locate the wine cooler away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. If the ambient temperature is higher than 80°F or lower than 55°F it will hinder the
performance of this appliance. This unit is not designed for use in a garage or any other
outside installation.
Avoid locating the wine cooler in moist areas.
Plug the wine cooler into dedicated, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized service center. This unit is not designed to be installed in an RV or used with an
inverter.
After plugging the appliance into a wall outlet, allow the unit to cool down for 3 ~ 4 hours under
before placing wine bottles in the wine cooler.

EN
4
Electrical Connection
This wine cooler should be properly grounded for your safety. The power cord of this wine cooler is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the
possibility of electrical shock.
Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied.
This wine cooler requires a standard 100-120 Volt A.C. / 60Hz electrical outlet with three-prong
ground.
This wine cooler is not designed to be used with an inverter.
The cord should be secured behind the wine cooler and not left exposed or dangling to prevent
accidental injury.
Never unplug the wine cooler by pulling the power cord. Always grip the plug firmly and pull straight
out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance. Use of an extension cord can
negatively affect the performance of the unit.
If any problems with the appliance persist, please contact our Customer Service Dept. to consult with
a representative at 888 775-0202 or visit our website to request warranty service at
www.mcappliance.com.
WARNING
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized service center.

EN
5
OPERATING YOUR WINE COOLER
- LIGHT BUTTON: To manually illuminate/extinguish the interior light
- TEMPERATURE ADJUSTING KNOB ( HIGH ): Increase Temperature
- TEMPERATURE ADJUSTING KNOB ( LOW ): Decrease Temperature
Temperature Control
The lead-time to achieve the pre-set temperature depends on the nature and quantity of the object
placed inside the cavity.
The temperature range can be set as low as 46°F or as high as 66°F to suit your specific storage
requirements. You can adjust the desired temperature by adjusting the temperature adjust knob.
The actual cabinet temperature in thermal electric units is dependent on the ambient room
temperature. Thus, the unit may not reach the desired preset temperature. For example, when the
ambient temperature is 77°F, the lowest cabinet temperature that the wine cooler can reach is
approximately 50°F. When the ambient temperature is 82°F, the cabinet temperature can reach
approximately 55°F.
In the event of a power failure or interruption, all modified settings will be lost.

EN
6
CARE AND MAINTENANCE
Cleaning Your Wine cooler
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
Unplug the unit from the wall outlet.
Remove all contents.
Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to a quart of water.
Wash the racks with a mild detergent solution.
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
The outside of the wine cooler should be cleaned with mild detergent and warm water.
Dry the interior and exterior with a soft cloth.
Dust or anything else blocking the vent may hinder the cooling efficiency of the wine cooler.
Vacuum the vent if necessary.
Vacation Time
Unplug the unit from the wall outlet.
Remove all the contents.
Clean the wine cooler.
Short vacations: Leave the wine cooler operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all content and
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if necessary.
Moving Your Wine cooler
Unplug the unit from the wall outlet.
Remove all the contents.
Securely tape down all loose items inside your wine cooler.
Tape the doors shut.
Energy Saving Tips
The wine cooler should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
Ensure that the door is closed when the wine cooler is turned on.

EN
7
TROUBLESHOOTING GUIDE
You can solve many common wine cooler problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling for
service.
PROBLEM
POSSIBLE CAUSE
Wine cooler does not operate.
Not plugged in.
Make sure the wall socket is functional by testing
another electrical appliance in the power socket.
The circuit breaker tripped or a blown fuse.
Temperature inside the wine cooler is too warm.
Door is kept open too long or is opened too
frequently. Warm air enters the wine cooler
every time the door is opened. Open the door
less often.
The door is not closed completely.
The door gasket does not seal properly.
The wine cooler has recently been disconnected
for a period of time.
Temperature control is set too warm.
Allow at least 24 hours for the internal
temperature to adjust properly.
*The interior temperature can be set between
46°F (8°C) and 66°F (18°C) only at the room
temperature of 77°F (25°C).
To achieve accurate temperature control, the unit
should not be used or operated in any of the
following locations:
in a sunny place.
in a room with poor air circulation such as a
garage.
near another heat producing appliance
(dishwasher, oven, refrigerator).
with an outlet shared with a refrigerator as it
will drain power from the unit.
built-in a wall recess, niche or cabinet.
in a cabinet or closet.
And remember to have at least 5 inch (15 cm) of
space on each side of unit.
Temperature inside the wine cooler is too cold.
Temperature control is set too cold. Turn the
control to a warmer setting and allow several
hours for the temperature to stabilize.
Vibrations.
Check to assure that the wine cooler is on a level
surface.
The wine cooler is touching the wall. Re-level the
wine cooler and move it from the wall.
If continued vibration occurs, unplug the unit from
the wall outlet. Contact Customer Service Dept.
for further assistance.
Moisture forms on inside wine cooler walls.
Door is slightly open.
Door is kept open too long, or is opened too
frequently. Open the door less often.
The door is not sealed properly.

EN
8
The door will not close properly.
The wine cooler is not on a level surface.
The gasket is dirty.
The racks are out of position
Fan is always running.
This is simply a function of the cooling system.
The lower the temperature setting, the more the
fan will run. If the room is warmer than 77°F
(25°C), it will run more.
There is a puddle of water under/around the wine
cooler.
This wine cooler features a self-evaporation
system. An external drip tray is therefore not
required for accumulating condensation. If water
forms under/around the wine cooler, the humidity
level in the room is too high. Either try to lower
the humidity level in the room (using, for
example, a dehumidifier) or place the wine cooler
in an another room.
General Statements
The unit does not use any CFC’s. There is no
compressor inside this unit.
The cooling system is called a Peltier System.

EN
9
Wine Cooler Warranty
MC Appliance Corporation warrants each new Wine cooler to be free from defects in
material and workmanship and agrees to remedy any such defect or to furnish a new part(s)
(at the company’s option) for any part(s) of the unit that has failed during the warranty
period. Parts and labor expenses are covered on this unit for a period of one year after the
date of purchase. A copy of the dated sales receipt / invoice is required to receive
warranty service or a refund.
This warranty covers appliances in use within the continental United States, Puerto
Rico and Hawaii. The warranty does not cover the following:
Damages due to shipping damage or improper installation.
Damages due to misuse or abuse.
Content losses due to failure of the unit.
Inside components such as door panels, door shelves, racks, light bulbs, etc.
Punctures to the evaporator system due to improper defrosting of the unit.
Repairs performed by unauthorized service agents.
Service calls that do not involve defects in material and workmanship such as
instruction on proper use of the product, door reversal or improper installation.
Replacement or resetting of house fuses or circuit breakers.
Failure of this product if used for other than for its intended purpose.
Disposal costs for any failed unit not returned to our factory.
Any delivery costs incurred as the result of a unit that fails to perform as specified.
Expenses for travel and transportation for product service if your appliance is located
in a remote area where service by an authorized service technician is not available.
Removal and reinstallation of your appliance if it is installed in an inaccessible
location or is not installed in accordance with published installation instructions.
This warranty is in lieu of all warranties expressed or implied and no representative or
person is authorized to assume for us any other liability in connection with the sale of
this product. Under no circumstances is the consumer permitted to return this unit to
the factory without prior written consent from MC Appliance Corporation.
Model Parts Labor Type of Service
MCWC6B One-Year One-Year Carry-In
For Service or Assistance please call 888 775-0202. Or visit us on the web at
www.mcappliance.com to request warranty service.

CNA International, Inc. d/b/a MC Appliance Corporation. All rights reserved.
Magic Chef®logo is a registered trademark of CNA International, Inc.
www.mcappliance.com Printed in China

LEA ESTE MANUAL ANTES DE UTILIZAR SU ENFRIADORA DE VINOS
Y GUÁRDELO PARA FUTURA REFERENCIA.
Independiente
enfriadora de vinos
Manual del usuario
Modelo MCWC6B

Registración del producto
Gracias por comprar el producto Magic Chef®. El primer paso para proteger su nuevo producto es completar la forma de registración en nuestra pagina web:
www.mcappliance.com/register. Los beneficios de registrar su producto incluyen lo siguiente:
1. Al registrar su producto nos permite contactarle para notificarle de un cambio de seguridad o actualización del producto.
2. Si llegara a necesitar servicio bajo garantía, registrando su producto nos permite ser más eficiente en procesar el servicio.
3. En el evento que usted tenga una perdida que esta cubierto por un seguro, registrando su producto puede servir como prueba de su compra.
Una vez más gracias por comprar un producto marca Magic Chef®.

1
INDICE DE MATERIAS
LOS NOMBRES DE LAS PARTES.............................................................. 2
LAS INSTRUCCIONES IMPORTANTES DE LA SEGURIDAD.................... 3
INSTRUCCIONES DE INSTALACIÓN
ANTES DE UTILIZAR SU ENFRIADORA DE VINO....................... 3
INSTALACIÓN INDEPENDIENTE ……………………………………..3
CONEXIÓN ELÉCTRICA……………….…………………………….....4
OPERAR SU ENFRIADORA DE VINO
CONTROL DE LA TEMPERATURA……...........................................5
CUIDE Y LA CONSERVACION
PARA LIMPIAR SU ENFRIADORA DE VINO....................................6
EN LAS VACACIONES ..……………………………………..………… 6
PARA CAMBIAR DE LUGAR SU ENFRIADORA DE VINO.............. 6
RECOMENDACIONES PARA AHORRAR ENERGÍA………………. 6
GUÍA DE RESOLUCIÓN DE PROBLEMAS………………………………….. 7-8
GARANTIA DE ENFRIADORA DE VINO..................................................... 9

2
LOS NOMBRES DE LAS PARTES
MODELO Nº . MCWC6B
1. ESTANTE
2. BISAGRA
3. CAVIDAD MANIJA
4. AJUSTABLE PATAS
5. SENSOR DE TEMPERATURA
6. PERILLA DE AJUSTE DE TEMPERATURA
7. LUZ
8. CONTROL DE LUZ

3
LAS INSTRUCCIONES IMPORTANTES DE LA SEGURIDAD
ADVERTENCIA
Para reducir el riesgo de incendios, golpes
de corriente o lesiones cuando utilice su
enfriadora de vino, sírvase tener en cuenta
las siguientes recomendaciones básicas:
Lea atentamente todas las instrucciones antes de usar el enfriadora de vino.
No limpie las partes del enfriadora de vino con productos inflamables. Los vapores
pueden originar un incendio o explosión.
No almacene ni use gasolina ni ningún otro gas o líquido inflamable cuando se
encuentre cerca de este enfriadora de vino u otro. Los vapores pueden originar un
incendio o explosión. -Excepto estas instrucciones-
INSTRUCCIONES DE INSTALACIÓN
ANTES DE UTILIZAR SU ENFRIADORA DE VINO
Retire el material de embalaje del exterior e interior.
Limpie la superficie interior con agua tibia y paño suave. (Limpiando la instrucción en la página 6)
INSTALAR SU ENFRIADROA DE VINO
Esta aplicación se diseña para ser libremente el estar parado no incorporada instalado.
Permitir 5 pulgadas de espacio entre la parte de atrás y los lados del enfriadora de vino, esto permite la
ventilación adecuada del aire. Ajustar las piernas para mantener el nivel de enfriadora de vino.
Ubique el enfriadora de vino fuera de la luz directa del sol y otras fuentes de calor (horno, calentador,
radiador, etc.). La luz directa del sol puede afectar la cubierta de acrílico y las fuentes de calor pueden
aumentar el consumo eléctrico. La temperatura ambiente debajo de 55°F o sobre 80°F obstaculizará el
funcionamiento de esta aplicación. Esta unidad no se diseña para el uso en un garage o ninguna
otra instalación exterior.
No coloque el Enfriadora de vino en ambientes húmedos.
Enchufe el Enfriadora de vino en un toma corriente con la debida descarga a tierra utilizado
exclusivamente para este enfriadora de vino. No corte ni retire la tercera pata (descarga a tierra) del
enchufe bajo ninguna circunstancia. Cualquier duda relacionada con la red de electricidad y/o la descarga
a tierra debe resolverse con un electricista certificado o un centro de servicios autorizado. Esta unidad
no se diseña para ser instalada en un RV o para ser utilizada con un inversor.
Después de enchufar en el tomacorriente de pared, prende la unidad y permite la unidad enfríe durante 3
ó 4 horas antes de colocar alimentos en el interior.

4
CONEXIÓN ELÉCTRICA
El enfriadora de vino debe estar adecuadamente conectado a tierra para su seguridad. El cable de
electricidad de este electrodoméstico cuenta con un enchufe de tres patas apto para los tomacorrientes de
pared con tres patas para minimizar las posibilidades de golpes de corriente.
No corte ni retire la tercera pata de descarga a tierra del enchufe bajo ninguna circunstancia.
Este equipo debe conectarse a un toma corriente de tres patas con descarga a tierra instalado en una red
estándar de electricidad con corriente 100-120 Volt A.C. ~/60Hz.
Este enfriadora de vino no se diseña para ser utilizado con un inversor.
El cable debe mantenerse recogido detrás del Enfriadora de vino no debe dejarse a la vista ni colgando para
prevenir accidentes.
No desenchufar tirando del cable. Tome el enchufe con firmeza y tire en dirección opuesta al receptáculo.
No utilice prolongaciones para conectar este enfriadora de vino. Si el cable es muy corto, llame a un
electricista o técnico calificado para que instale un toma corriente cerca del equipo. El uso de cables de
prolongación puede perjudicar el funcionamiento de la unidad.
Si persisten algunos problemas con la aplicación, entre en contacto con por favor nuestro departamento del
servicio de cliente para consultar con un representante en 888 775-0202 o visite nuestro Web site para
solicitar servicio de la garantía en www.mcappliance.com.
ADVERTENCIA 
El uso indebido de la descarga a tierra puede causar golpes de corriente. Si el cable de
alimentación está dañado, hágalo reemplazar con un service autorizado.

5
OPERAR SU ENFRIADORA DE VINO
- CONTROL DE LUZ: Para iluminar manuall y extinguise la luz interior
- PERILLA DE AJUSTE DE TEMPERATURA ( alto ): aumento de temperatura
- PERILLA DE AJUSTE DE TEMPERATURA ( bajo ): disminución de temperatura
CONTROL DE TEMPERATURA
El tiempo para alcanzar la temperatura establecida previamente depende de la naturaleza y cantidad de los
objetos colocados en el interior de la cavidad.
El rango de temperatura se puede ajustar tan bajo como 46°F o tan alto como 66°F a satisfacer sus
requerimientos de almacenamiento. Puede ajustar la temperatura deseada ajustando la perilla de ajuste de
temperatura
La temperatura real de gabinete en unidades eléctricas térmica depende de la temperatura ambiente. Por lo
tanto, la unidad no puede alcanzar la temperatura deseada. Por ejemplo, cuando la temperatura ambiente es
de 77°F, la temperatura más baja que el enfriadora de vino puede alcanzar es de aproximadamente 50°F.
Cuando la temperatura ambiente es de 82°F, la temperatura puede llegar a aproximadamente 55°F.
En el caso de un fallo de alimentación o la interrupción, todas las opciones modificadas se perderán.

6
CUIDE Y LA CONSERVACION
PARA LIMPIAR SU ENFRIADORA DE VINO
Una vez finalizada la instalación, se recomienda una limpieza completa de la unidad.
Desenchufe la unidad de la toma de corriente.
Quite todo el contenido.
Limpie el interior con un paño humedecido en una solución de agua tibia y bicarbonato de soda. La
solución se prepara con aproximadamente 2 cucharadas de bicarbonato de soda y un cuarto de agua.
Lavar el bastidores con una solución detergente suave.
Recuerde mantener limpia la junta de la puerta (burlete) para que la unidad funcione correctamente.
La parte exterior del enfriadora de vino se debe limpiar con una solución de agua tibia y detergente
suave.
Seque el interior y exterior con paño suave.
El polvo o cualquier cosa que bloquea el respiradero puede obstaculizar la eficacia que se refresca del
enfriadora del vino. Limpie el respiradero con la aspiradora en caso de necesidad.
EN LAS VACACIONES
Desenchufe la unidad de la toma de corriente.
Quite todo el contenido.
Limpie el enfriadora de vino.
Vacaciones cortas: Deje el enfriadora de vino en funcionamiento durante los períodos de vacaciones que
no superen las tres semanas.
Vacaciones largas: Si el electrodoméstico no se usa durante varios meses, retire todos los alimentos y
desconecte de la red de electricidad. Limpie y seque cuidadosamente el interior. Para evitar la formación
de olores y humedad, deje la puerta apenas abierta: si es necesario, trábela para que se mantenga
abierta o retire la puerta.
PARA CAMBIAR DE LUGAR SU ENFRIADORA DE VINO
Desenchufe la unidad de la toma de corriente.
Quite todo el contenido.
Asegure con cinta adhesiva los elementos sueltos en el interior del enfriadora de vino.
Asegure la puerta con cinta adhesiva.
RECOMENDACIONES PARA AHORRAR ENERGÍA
El enfriadora de vino se debe ubicar en el lugar más fresco de la habitación, alejado de las fuentes de
calor y de caños de calefacción, y protegido de la luz del sol directa.
Asegúrese de que la puerta sea cerrada cuando se gira el refrigerador del vino.