EN
6
OPERATING YOUR WINE COOLER
Temperature Control
xYour wine cooler has one control panel for regulating the
temperature. The temperature control panel is located on
the left center of the wine cooler.
xTo turn on the wine cooler, press the “Power” button
located on the control panel. If correctly powered on, a
green light will illuminate the “Power” button.
xThe temperature of the wine cooler is pre-set by the
manufacturer at 54°F (12°C). To increase or decrease the
temperature to desired level, press “+” or “-“ button on the
control panel to adjust the temperature setting.
xThe wine cooler uses semi-conductor cooling technology.
For optimal performance of the appliance, we recommend
that the wine cooler be installed in a location where the
ambient temperature will be between 55°F (12.8°C) ~ 77°F (25°C). The operating temperature
range of the wine cooler temperature control is from 46°F (8°C) ~ 65°F (18°C), +/- 3°C. Please
be advised that the ambient temperature of the wine cooler will affect the internal temperature of
the cooler. Cooler ambient temperature will result in a cooler operating internal temperature and
warmer ambient temperature will result in a warmer operating internal temperature.
xTo select Celsius (°C) or Fahrenheit (°F), press the “Temp” button on the operation panel.
xTemperature Recommendations:
Red Wine: 57°F ~ 65°F (14°C ~ 18°C)
White Wine: 48°F ~ 54°F (9°C ~ 12°C)
xNOTE;
xIf the unit is unplugged, loses power; you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the wine cooler may not start.
xIf there are no items inside the wine cooler, it may take approximately 3 ~ 4 hours to
reach the desired temperature setting.
xThe wine cooler is designed to fit eight standard unopened wine bottles. Bottles of
different sizes or opened bottles may need to be positioned at different angles and
therefore affect the storage capacity of the wine cooler.
Changing The Inner Light
Before removing the inner light, turn off the wine cooler first and then unplug the unit from the wall
outlet. Failure to do so could result in electrical shock or personal injury.
xUse Phillips screwdriver to take out the screw.
xRemove the transparent light cover by pulling downwards gently.
xPull out the two connectors and remove the LED board.
xReplace with a new LED board that is the same shape and size
xReplace the transparent light cover and tighten screw.
Prior to changing the inner light of the wine cooler, please contact our Customer Service
Dept. at 888 775-0202 to order replacement LED board with a representative.
SP
6
OPERAR SU ENFRIADORA DE VINOS
CONTROL DE TEMPERATURA
xLa unidad tiene un control para regular la temperatura. El
control de la temperatura está situado en centro izquierdo
del enfriadora de vinos.
xPara girar el refrigerador del vino, presione el botón de la
"Power" situado en el panel de control. Si está accionada
correctamente encendido, una luz verde iluminará el botón
de la "Power".
xLa temperatura del refrigerador del vino es preestablecida
por el fabricante en 54°F (12°C). Para aumentar o disminuir
la temperatura al nivel, a la prensa deseados "+" o "-"
abotone en el panel de control para ajustar el ajuste de la
temperatura.
xEl refrigerador del vino utiliza tecnología que se refresca del
semiconductor. Para el funcionamiento óptimo de la aplicación, recomendamos que el
refrigerador del vino esté instalado en una localización donde estará la temperatura ambiente
entre el ~ 55°F (12.8°C) 77°F (25°C). La gama de temperaturas de funcionamiento del control de
la temperatura del refrigerador del vino es del ~ 46°F (8°C) 65°F (18°C), +/- 3°C. Aconséjese por
favor que la temperatura ambiente del refrigerador del vino afectará la temperatura interna del
refrigerador. Una temperatura ambiente más fresca dará lugar a un refrigerador que funciona
temperatura interna y una temperatura ambiente más caliente dará lugar a un warmer que
funciona temperatura interna.
xPara seleccionar centígrado (°C) o Fahrenheit (°F), presione el botón de la "temperatura" en el
panel de la operación.
xRecomendaciones De la Temperatura:
Vino Rojo: 57°F ~ 65°F (14°C ~ 18°C)
Vino blanco: 48°F ~ 54°F (9°C ~ 12°C)
xNOTA;
xSi se desenchufa la unidad, pierde energía; usted debe esperar 3 a 5 minutos antes
de recomenzar la unidad. Si intenta volver a ponerla en funcionamiento antes de
transcurrido ese período, el Enfriadora de vinos no funcionará.
xSi no hay artículos dentro del refrigerador del vino, puede tomar a aproximadamente
3 el ~ 4 horas para alcanzar el ajuste deseado de la temperatura.
xEl refrigerador del vino se diseña para caber ocho botellas no abiertas estándares del
vino. Las botellas de diversos tamaños o las botellas abiertas pueden necesitar ser
colocado a diversos ángulos y por lo tanto para afectar la memoria del refrigerador
del vino.
CAMBIAR LA LUZ INTERNA
Antes de quitar la bombilla, dé vuelta apagado al Enfriadora de vinos primero y después desenchufe
la unidad del enchufe de pared. La falta de hacer tan podía dar lugar a choque eléctrico o a daños
corporales.
xUtilice el destornillador Phillips para tomar hacia fuera atornillan.
xQuite la cubierta ligera transparente tirando hacia abajo suavemente.
xSaque los dos conectadores y quite el tablero del LED.
xSubstituya por un nuevo tablero del LED que sea la misma forma y tamaño.
xSubstituya la cubierta ligera transparente y apriete el tornillo.
Antes de cambiar la luz interna del refrigerador del vino, entre en contacto con por favor
nuestro departamento del servicio de cliente en 888 775-0202 para pedir el tablero del
reemplazo LED con un representante.