
2
09-10013-00REV.A2/13/2014
2.Using the hardware kitincludedwith the shelf, install the screws and nuts onto the front of the rack atthe
location the shelfwill be installed. (See Figure3.)
Figure3
3. Carefully slide the sliderbracketwith theMACPROinstalled,into the mountedshelf. Using the two
thumbscrews on the front of the brackets to secure the sliderto shelf.(SeeFigure 4.)
Figure4
4.Install external cables andtie along the mounting bracketusing Velcrostraps providedas shown.
(See Figure 2.)
FOR QUESTIONSCONTACTUSAT+1(858)530-2511OR SUBMITA REQUESTAT WWW.MAGMA.COM/SUPPORT