Magmaweld RS 450 M PRO User manual

USER MANUAL
KULLANIM KILAVUZU
RS 350 M PRO - RS 350 MW PRO
RS 450 M PRO - RS 450 MW PRO
RS 550 M PRO - RS 550 MW PRO
MIG / MAGWELDING MACHINE
([phone]
magmaweld.com
[e-mail] ([phone]
MIG / MAG KAYNAK MAKİNESİ
EN
TR

Magma Mekatronik önceden haber vermeksizin kullanma kılavuzundaki bilgilerde ve resimlerde değişiklik yapılabilir.
Müşteri Hizmetleri: 444 9 353
E-posta: [e-mail]
Organize Sanayi Bölgesi, 5. Kısım 45030 Manisa / TÜRKİYE

EN
www.magmaweld.com
RS 350 M PRO - RS 350 MW PRO, RS 450 M PRO - RS 450 MW PRO, RS 550 M PRO - RS 550 MW PRO 3
USER MANUAL | KULLANIM KILAVUZU
CONTENTS
1
1.1
1.2
1.3
1.4
1.5
2
2.1
2.2
2.3
2.4
2.4.1
2.4.2
2.4.3
2.4.4
2.4.5
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
4
4.1
4.2
4.3
4.4
5
6
7
SAFETY PRECAUTIONS
TECHNICAL INFORMATION
General Information
Machine Components
Product Label
Technical Data
Accessories
INSTALLATION INFORMATION
Delivery Control
Installation and Operation Recommendations
Mains Plug Connection
Welding Connections
Wire Feed Unit Connections
Grounding Pliers Connections
Water Cooling Unit
Connection Of Long Interim Packages
Gas Connections
USAGE INFORMATION
User Interface
Connection to Mains
Preparation And Connection Of TheTorch
Selection And Replacement Of Wire Feed Rollers
Placing TheWire Basket And Wire Feeding Process
Adjustment Of Gas Flow
Using Trigger Modes
Starting And Ending The Welding Process
RS 350 M PRO, RS 350 MW PRO Welding Parameters
RS 450 M PRO, RS 450 MW PRO Welding Parameters
RS 550 M PRO, RS 550 MW PRO Welding Parameters
Machine Features
MAINTENANCE AND FAILURE INFORMATION
Maintenance
Non-Periodic Maintenance
Troubleshooting
Error Codes
ANNEX 1 POWER SUPPLY SPARE PARTS
ANNEX 2 WIRE FEED UNIT SPARE PARTS
ANNEX 3 WATER COOLING UNIT SPARE PARTS
5
11
11
11
13
14
14
16
16
16
17
17
17
17
18
18
19
20
20
23
23
24
25
26
26
27
27
28
28
29
30
30
30
31
32
33
34
35
Contents
TR

RS 350 M PRO - RS 350 MW PRO, RS 450 M PRO - RS 450 MW PRO, RS 550 M PRO - RS 550 MW PRO
EN
www.magmaweld.com
4
USER MANUAL | KULLANIM KILAVUZU
Contents
CONTENTS
8
9
10
11
12
13
14
15
16
ANNEX 4 SPARE PART LIST
ANNEX 5 ABBREVIATIONS USED IN CIRCUIT DIAGRAMS
ANNEX 6 RS 350 M PRO CIRCUIT DIAGRAM
ANNEX 7 RS 350 MW PRO CIRCUIT DIAGRAM
ANNEX 8 RS 450 M PRO CIRCUIT DIAGRAM
ANNEX 9 RS 450 MW PRO CIRCUIT DIAGRAM
ANNEX 10 RS 550 M PRO CIRCUIT DIAGRAM
ANNEX 11 RS 550 MW PRO CIRCUIT DIAGRAM
ANNEX 12 FINE SETTINGS IN THEWIRE FEED UNIT
36
37
38
39
40
41
42
43
44
TR

EN
www.magmaweld.com
RS 350 M PRO - RS 350 MW PRO, RS 450 M PRO - RS 450 MW PRO, RS 550 M PRO - RS 550 MW PRO 5
USER MANUAL | KULLANIM KILAVUZU
SAFETY PRECAUTIONS
Be Sure To Follow All Safety Rules In This Manual!
Make certain that the installation procedures comply with national electrical standards and
other relevant regulations, and ensure that the machine is installed by authorized persons.
• Safety symbols found n the manual are used to dentfy potental hazards.
• When any one of the safety symbols are seen n ths manual, t must be understood that there s a rsk
of njury and the followng nstructons should be read carefully to avod potental hazards.
• The possessor of the machne s responsble for preventng unauthorzed persons from accessng the
equpment.
• Persons usng the machne must be experenced or fully traned n weldng; they have to read the
user manual before operaton and follow the safety nstructons.
• Read the user manual, the label on the machne and the safety nstructons carefully.
• Make sure that the warnng labels on the machne are n good condton. Replace mssng and
damaged labels.
• Learn how to operate the machne, how to make the checks n a correct manner.
• Use your machne n sutable workng envronments.
• Improper changes made n your machne wll negatvely aect the safe operaton and ts longevty.
• The manufacturer s not responsble for the consequences resultng from the operaton of the devce
beyond the specfed condtons.
• Wear dry and sturdy nsulated gloves and workng apron. Never use wet or damaged gloves and wor
kng aprons.
• Do not touch the electrode wth the bare hand.
• Never touch parts that carry electrcty.
• Never touch the electrode f you are n contact wth the electrode attached to the work surface, oor
or another machne.
• By solatng yourself from the work surface and the oor, you can protect yourself from possble
electrc shocks. Use a non-ammable, electrcally nsulatng, dry and undamaged nsulaton materal
that s large enough to cut o the operator’s contact wth the work surface.
• Do not connect more than one electrode to the electrode holder. Keep the machne turned o when
not n use.
• Before reparng the machne, remove all power connectons and/or connector plugs or turn o the
machne.
• Be careful when usng a long mans cable.
• Check all cables frequently for possble damage. If a damaged or an unnsulated cable s detected,
repar or replace t mmedately.
• Make sure that the groundng of the power lne s properly connected.
ATTENTION
Indcates a potentally hazardous stuaton that could cause njury or damage. In case f no precauton s
taken, t may cause njures or materal losses / damages.
IMPORTANT
Specfes notfcatons and alerts on how to operate the machne.
DANGER
Indcates a serous danger. In case f not avoded, severe or fatal njures may occur.
Explanation Of Safety
Information
Comprehending Safety
Precautions
Electric Shocks
May Kill
Explanation Of Safety
Symbols
Safety Precautions