Magnadyne LINEAR SERIES RV4000 Specification sheet

Operation
and Installation
Manual
®
RV4000
AM / FM Stereo
Multi-Media Receiver
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
3-Beam Laser Pickup
A B
AUX AM/FM DISC
SPEAKER
SPK FM ST
RESET AUX
HEADPHONES
®

Please take the time to read all of the information in this manual. Familiarity with operation and installation
procedures will help you obtain the best possible performance from your new AM/FM Stereo Multi-Media
Receiver.
WARNING! To prevent fire or electrical shock hazard, do not expose this product to moisture, or remove
cover or bottom screws. No user-serviceable parts inside. Refer servicing to qualified person nel.
Introduction
2
Index
Button Locations and Functions 3-4
General Operation 5
Sound Controls 5-7
Speaker Selection 7
Setting the Clock 7-8
Sleep Timer Operation 8
Alarm Operation 9
Radio Operations 10-11
Disc Warnings 11
Music Disc Operation 12-13
MP3 Disc Operation 14-15
Audio Input 16
Headphone Output 16
Reset Button 17
Additional Feature 17
Installation 18
Speaker Connections 19
Wiring and Auxiliary Connections 20
Safety Instructions 21
Warranty 22

Button Locations and Functions
3
1. Power On/Off: Press to turn the unit on or off.
2. Disc Door: To play a disc, insert the disc with label facing forward.
3. Disc Door Release: Press to open the door so the disc can be inserted.
4. Auxiliary Button (AUX): Press to choose auxiliary audio in mode.
5. Display Area: This area displays all function information for the radio, clock, disc player and auxiliary
input device.
6. Mute Button: Press to mute the audio, press again to restore the audio.
7. Speaker Selection Buttons: Press to switch the speakers sets A and B on and off.
8. Disc Button: Press to select the music player mode.
9. Radio Button (AM/FM): Press to select the radio mode. Sequential presses will select radio band:
FM 1, FM 2, FM 3, AM 1 and AM 2.
10.Play/Pause Button (ll): Press to pause disc play, press again to resume play.
11. Seek Down (l), Seek Up (l) Buttons:
Radio Mode: Press to tune the radio to a lower or higher radio station.
Disc Mode: Press to search for the beginning or next track.
12. Volume and Select Button: Rotate to increase or decrease the volume level. Press to select the sound
controls: Bass, Treble and Balance.
13. Headphone Socket: Accepts 3.5mm stereo headphone jacks.
14. Audio Input Jack: Press the AUX button until “Audio” appears in the display then plug in a device via
the 3.5mm audio input socket.
Note: The RV4000 does not control the device, it just allows the audio to be played through the system.
15. Reset Button: Press to reset the unit to it’s default settings.
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
3-Beam Laser Pickup
A B
AUX AM/FM DISC
SPEAKER
SPK FM ST
RESET AUX
HEADPHONES
®
125
7
4
8
9
10
11
12
13
1415
16
18
20
22
24
26
3
17
19
21
23
25
27
6

4
Button Locations and Functions (Continued)
16. Dimmer Button (DIM): Press to dim the lighting in the display area. Sequential presses will select dif-
ferent levels of display area lighting.
17. Radio Preset Button (6): Recalls a memorized radio station, and programs a radio station into
memory.
18. Display Button (DISP): Press to toggle through the available display information.
19. Radio Preset Button (5): Recalls a memorized radio station, and programs a radio station into
memory.
20. Alarm Button: Sets the alarm. (See “Alarm Operation” for more details).
21. Radio Preset Button (4): Recalls a memorized radio station, and programs a radio station into
memory.
22. Sleep Button: Sets the sleep timer. (See “Sleep Timer Operation” for more details).
23. Radio Preset Button (3): Recalls a memorized radio station, and programs a radio station into
memory.
24. Radio AS/PS Button: Automatic radio station memory storing (AS) and Preset radio station scanning
(PS). (See “AM/FM Operation” for more details).
25. Radio Preset Button (2): Recalls a memorized radio station, and programs a radio station into
memory.
26. EQ/LOUD Button (Equalizer and Loudness):Press to select between the preset sound equalization
settings. Press and hold the button to boost high and low tones at low volume levels (loudness).
27. Radio Preset Button (1): Recalls a memorized radio station, and programs a radio station into
memory.

5
General Operations
Selecting a Play Source:
To select a play source, press one of the follow-
ing mode buttons:
AUX (Auxiliary Audio Input),
AM/FM (AM or FM Radio Band) or
DISC (Music)
Dimming the Display:
Press the DIM button to select the desired level
of brightness for the display area.
Display Selection:
Press the DISP button to display the clock.
Press again to return to previous display.
Press and hold to perform clock setting functions
(See “Setting the Clock” for more details).
Volume:
Increase the volume by rotating the VOLUME
knob clockwise. Decrease the volume by rotating
the VOLUME knob counterclockwise.
Sound Controls
A B
AUX
AM/FM
DISC
SPEAKER
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
A B
AUX
AM/FM
DISC
SPEAKER
SPK FM ST
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
SPK FM ST
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
SPK FM ST
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
SPK FM ST
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
SPK A+B FM
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX AM/FM DISC
SPEAKER
A B
AUX AM/FM DISC
SPEAKER
Power On/Off:
Press the POWER button to turn the unit On/Off.

6
Sound Controls
Bass:
Select the Bass mode by pressing the VOLUME
knob. Increase the Bass by rotating the VOLUME
knob clockwise. Decrease the Bass by rotating the
knob counterclockwise. After 6 seconds control
reverts back to volume control.
Bass, Treble and Balance Control
Select the desired sound mode by pressing the VOLUME knob. The modes will be displayed in the fol-
lowing order: Bass, Treble, Balance and Volume.
Balance:
Select the Balance mode by pressing the VOLUME
knob. Adjust the Balance by rotating the knob.
r -
- L = Equal sound right and left
r 7 = Right speaker only
L 7 = Left speaker only
After 6 seconds control reverts back to volume
control.
Treble:
Select the Treble mode by pressing the VOLUME
knob. Increase the Treble by rotating the VOLUME
knob clockwise. Decrease the Treble by rotating
the knob counterclockwise. After 6 seconds con-
trol reverts back to volume control.
Equalizer (EQ):
Press the EQ button to choose between the
preset equalizer settings: Flat, Classic, Rock, Pop
and Jazz as indicated in the display area.
Loud:
To boost high and low tones at low volume
levels, press and hold the EQ button until “LOUd
On” appears in the display. To deselect, press
and hold the EQ button again until “LOUd OFF”
appears in the display.
Hold
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
A B
AUX AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX AM/FM
DISC
SPEAKER

7
Sound Controls (Continued)
Mute:
Press the button to mute the volume level.
Press the button again to restore the volume.
Speaker Selection
Selecting Speaker Sets:
• Press the Abutton to toggle speaker set A on
and off. “SPK A” appears in the display when
speaker set A is on.
• Press the Bbutton to toggle speaker set B on
and off. “SPK B” appears in the display when
speaker set B is on.
Note: When “SPK A+B” appears in the display both
speaker sets A and B are on. When nothing appears
in the displaying both speaker sets are off .
Setting the Clock
1. Press the DISP button until the clock appears in
the display.
2. Press and hold the DISP button until the hours
number starts flashing.
3. Rotate the VOLUME knob until the correct Hour
appears in the display.
Note: When setting the clock make sure to
select the correct AM or PM indicator.
Hold
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
AUX
AM/FM
SPK A FM ST
RESET AV
HEADPHONES
PM
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
PM
EQ
1
AS/PS
2
O
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
PM
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX AM/FM DISC
SPEAKER
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
A B
AUX
AM/FM
DISC
SPEAKER

8
Sleep Timer Operation
Setting the Sleep Timer:
1. Press the SLP button until the “SLP 10”
appears in the display.
2. Keep pressing the SLP button again until the
desired sleep time appears in the display (00,
10, 20, 30, 40, 50, 60, 70, 80 minutes).
3. Wait 5 seconds and the display will return to
normal operation and “SLP” will appear in the
display.
4. After the designated sleep timer has expired
the unit will turn off automatically .
Cancelling the Sleep Timer:
1. Press the SLP button until “00” is displayed.
2. Wait 5 seconds and the display will return to
normal operation.
Setting the Clock (Continued)
4. Press the VOLUME knob and the Minute indica-
tors will start flashing.
5. Rotate the VOLUME knob until the correct
Minutes appears in the display . Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing indicating the clock is set.
PM
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
PM
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX
AM/FM DISC
SPEAKER

9
Alarm Operation
Setting the Alarm Timer:
1. Press the ALM button and the clock will
appear in the display with the hour number
flashing.
2. Rotate the VOLUME knob until the correct
Hour appears in the display. “ALM” will
appear in the display indicating the alarm is
activated.
Note 1: When setting the alarm clock make
sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use
12:00 AM, because that time is used to cancel
the alarm.
3. Press the VOLUME knob and the minute indi-
cators will start flashing.
4. Rotate the VOLUME knob until the correct
minutes appears in the display . Wait 5 seconds
and the colon between the hours and the
minutes will start flashing. The letter “ALM”
will appear in the display indicating the alarm
is set.
5. Press the POWER button to turn the unit off.
The unit will automatically turn on when the
set alarm time is reached.
Cancelling the Alarm Timer:
Follow the procedures above except set the alarm
time to 12:00 AM. When the display exits alarm
timer programming the “ALM” will disappear
from the display indicating the alarm has been
cancelled.
PM
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
PM
PM
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
PM
ALM
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
A B
AUX AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX AM/FM
DISC
SPEAKER
A B
AUX
AM/FM
DISC
SPEAKER
A B
AUX AM/FM
DISC
SPEAKER

10
Radio Operations
Selecting the Play Source:
Press the AM/FM button and “rAdIO” appears in
the display. After a brief moment either AM or
FM will appear in the display.
Selecting the AM or FM:
Press the AM/FM button repeatedly and select
from FM 1, FM 2, FM 3, AM 1 or AM 2.
Seek Tuning in a Radio Station:
Press and release the l button to tune in a
lower radio station. Press and release the l
button to tune in a higher radio station.
Note: The unit will automatically switch from
FM Mono to FM Stereo when the signal strength
increases to a stereo level. If the stereo signal
should become weak, the unit will switch back
to Mono. FM stereo reception is indicated when
“ST” appears in the display.
SPK A FM ST
Radio
Frequency
Band Indicator FM Stereo Indicator
Preset Button
Number
Preset Band
Group
Memorizing Radio Stations:
1. Press the AM/FM button to select either the
FM 1, FM 2, FM 3, AM 1 or AM 2 radio band.
2. Tune-in the desired radio station.
3. To memorize the station press and hold any-
one of the six radio station recall buttons until
the preset number appears.
Hold
A B
AUX
AM/FM
DISC
SPEAKER
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
SPK AST
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
SPK AST
A B
AUX
AM/FM
DISC
SPEAKER
Manual Tuning in a Radio Station:
Press and hold the l button to manually tune
in a lower radio frequency. Press and hold the
l button to manually tune in a higher radio
frequency.
A B
AUX
AM/FM
DISC
SPEAKER
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
SPK AST
EQ
1
AS/PS
2
SLP
3
ALM
4
DISP
5
DIM
6
PUSH
RESET AV
HEADPHONES
SPK AST
A B
AUX
AM/FM
DISC
SPEAKER