Magnimage LED-F816-3D User manual

1
LED-F816-3D
Video Control Server
User Manual V1.0
△
!
Document Version：V1.0 Document Release Date：2023/10/20
Before using this LED video processor, please
read this instruction manual carefully and keep it
for future reference.
LED-F816-3D

2
Statement
Without the written permission of the company, no unit or individual may
copy, transcribe or translate part or all of the contents of this manual.This
manual shall not be distributed in any form or by any means
(electronic,mechanical, photocopying, recording or other possible means) for
commercial or commercial purposes.
The product specifications and information mentioned in this manual are
for reference only and are subject to update without notice. Unless otherwise
agreed, this manual is only used as a guide, and all statements, information,
etc. in this manual do not constitute any form of guarantee.
Revision History
Version
Revise Date
Revised Content
V1.0
2023-10-20
First release

3
Directory
Statement ......................................................................................................................................2
Introduction .............................................................................................................................. 3
Trademark Credit..................................................................................................................................................................... 4
About the software................................................................................................................................................................. 4
Product Features......................................................................................................................................................................5
Port Extension...........................................................................................................................................................................6
Safety Notice.............................................................................................................................................................................6
Features .........................................................................................................................................8
Overview ..................................................................................................................................................................................... 8
Technical Specifications...................................................................................................................................................... 12
Use Menu .................................................................................................................................... 12
How to use the buttons ......................................................................................................................................................14
MENU Area： .............................................................................................................................................................. 14
LAYER Area：...............................................................................................................................................................15
INPUT Area：.............................................................................................................................................................. 15
Introduction to Default State ............................................................................................................................................16
Main Menu Introduction .................................................................................................................................................... 17
Main Menu...................................................................................................................................................................18
LED SCREEN CFG ........................................................................................................................................................18
INPUT.............................................................................................................................................................................22
LAYERS...........................................................................................................................................................................26
PICTURE.........................................................................................................................................................................28
BACKUP......................................................................................................................................................................... 29
PRESETS.........................................................................................................................................................................32
MISC............................................................................................................................................................................... 35
LANGUAGE/语言.........................................................................................................................................................41
Warranty ..................................................................................................................................... 42
Machine Warranty Period...................................................................................................................................................42
Non Warranty......................................................................................................................................................................... 42

4
Introduction
Thank you for purchasing our company's LED all-in-one video controller.
Hope you can enjoy the excellent performance of this product. The design of
this LED all-in-one video controller complies with international and industry
standards, but improper operation may still cause personal injury and
property damage. In order to avoid the possible dangers caused by the
equipment, and to benefit from your equipment as much as possible, please
follow the relevant instructions in this manual when installing and operating
the product.
Trademark Credit
VESA is a trademark of the Video Electronics Standards Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Even if the company or product trademark is not specifically stated, the
trademark has been fully recognized.
About the software
It is illegal to modify, decompile, disassemble, decrypt or reverse engineer
to the software installed on this product.

5
Product Features
Standard multiple input interfaces：HDMI2.0×1、DP1.2×1 、DVI×2、Audio
×1；Support for expansion：3G SDI×1、DVI×2 or HDMI2.0+DP1.2
Support HDMI loop out
Support zoom and image crop
Support quick light-up screen, no need computer software connection
Support single input port 4K×2K/60Hz(HDMI2.0) or 8K×1K/60Hz(DP1.2)
resolution
Support window size & position adjustment
Support four layers display, and full-screen roaming ， and quick layer
layout templet
Support seamless switching between input signals and presets.
Support customized Input & Output resolution
Single network port standard load 0.98 million pixels，a single machine
can carry maximum width 16380 pixels and maximum height 7680 pixels
Support template save and load
Support connection with C-Link series receiving card
Support the read and load of configuration files from native U disks
Support monitoring output function
Support free wiring function
Support for single machine input backup
Support single machine network port backup and multi machine
network port backup
Support receiving card serial number calibration, switch on the
intelligent serial number to visually check the position of the box
Support the debug network port comes with its own ring out, which
eliminates the need for routers to form a local area network, make it
convenient for multi machine cascading debug
Support single machine multi input splicing and multi machine splicing
Support RS232 central control

6
Support external independent audio input and output
Support scrolling caption
Support time task function, timed brightness
Support for fiber optic backup
Support button lock
Support 120Hz continuous 3D and around 60Hz/up and down 3D display
Support 10bit/12bit high color and deep video input
Port Extension
LED-F816-3Dis basic model number，we can extend Input Source on the
basis of basic model. Extension model are as follows:
Safety Notice
The input voltage range of the power supply of this product is 100~240V,
50/60Hz, please use the correct power supply.
When you want to connect or unplug any signal cable or control cable,
please make sure that all power cables have been unplugged beforehand.
When you want to add hardware devices to this product or remove
hardware devices from this product, please make sure that all signal
cables and power cables have been unplugged in advance.
Before performing any hardware operations, power off the LED video
processor and discharge static electricity from your body by touching a
grounded surface.
Please use it in a clean, dry and ventilated environment, and do not use
Available Expansion Modules
Product Model
Input
module
Expand 2 external DVI input module
LED-F816D-3D
Expand 1 external HDMI2.0 and 1 external DP1.2
input module
LED-F816H-3D
Expand 1 external 3G SDI input module
LED-F816S-3D
Expand 2 external DVI and 1 external 3G SDI input
module
LED-F816DS-3D

7
this product in a high temperature, humid environment.
This product is an electronic product, please keep it away from fire, water
and flammable and explosive dangerous goods.
There are high-voltage components in this product, please do not open
the case or repair the device by yourself.
If you find any abnormality such as smoke or odor, please Function off the
power switch immediately and contact the dealer.

8
Features
Overview
The video control server is a video controller created by Magnimage,
which integrates video processing, splicing, switching and LED screen sending
card functions. This series integrates various professional input interfaces,
supports up to 4K × 2K/60Hz or 8K×1K/60Hz, LED-F816-3D single machine
can load 10.40 million pixels, with bandwidth expansion enabled, a single
machine can load up to 15.68 million pixels, and support 16 Gigabit Ethernet
ports for output. can be used with the company's support to connect
Magnimage C-Link series receiving cards.
The load capacity of all-in-one video controller is twice of the ordinary
all-in-one video controller, and supports EDID management and customize
output resolution, single controller output max width can be 16380 pixel, up
to 120HZ refresh rate. Greatly improved the utilization of output bandwidth.
The output image can be scaled point by point according to the actual size of
the LED display.
Complete video input interface, including: DVI×2, DP1.2×1 (support 8K ×
1K/60Hz), HDMI2.0 × 1 (support 4K × 2K/60Hz), AUDIO×1 , HDMI loop-out
(only supports HDMI2.0 loop-out) × 1 , and can also extend 12G SDI×1 ,DVI
×2 or HDMI2.0×1 and DP1.2×1input source at the same time. And it supports
network, square port USB and RS232 serial port control, which is convenient
for interconnection and control with a variety of video equipment.

9
Front Panel
INPUT2
INPUT1
LAYER 4
LAYER 3
LAYER 2
LAYER 1
Rotary knob
Button Description
DVI2
DVI1
Layer4
Layer3
Layer2
Layer1
Return button, return to the previous menu
select menu items and adjust parameters
INPUT7
INPUT6
INPUT5
INPUT4
INPUT3
Extend input port
Extend input port
Extend input port
DP1
HDMI1

10
Back Panel
LED-F816-3D
LED-F816DS-3D
LED-F816S-3D

11
Back Panel
LED-F816D-3D
LED-F816H-3D

12
Technical Specifications
Video Input Port
DVI1-DVI2
2 x DVI input ports
DP1.2
1 x DP input ports
HDMI2.0
1 x HDMI2.0 input ports
3G SDI(extend)
1 x SDI input ports
Audio（IN）
1 x Audio input ports
DVI3-DVI4（extend）
2 x DVI input ports
HDMI2.0+DP1.2
(extend)
1 x HDMI2.0 and 1 x DP input ports
Model
Video Output Port
LED-F816-3D
Gigabit Ethernet
Port
16 port，single port load 0.98 million pixels,
whole unit load 15.68 million pixels
HDMI Loop Out
Can loop out HDMI2.0 input source
HDMI Monitor
Output monitoring
OPT1~OPT2
10G Optical Fiber Interface
Input Information
Port
Quantity Of
Resolution Specification
DVI
2
3840X1080/60Hz and customized
DP1.2
1
7680×1080/60Hz、3840x2160/60Hz and customized
HDMI2.0
1
3840×2160/60Hz and customized
3G SDI(extend)
1
3G-SDI(Only layer3 and layer4 supports SDI interlacing)
DVI3-DVI4(extend)
2
3840X1080/60Hz and customized
HDMI2.0+DP1.2
(extend)
2
7680×1080/60Hz、3840x2160/60Hz and customized
Audio（IN）
1
Can external audio and output audio signal with
multi-function card

13
Output Information
Port
Quantity Of
Resolution Specification
Gigabit Ethernet
Port
16
16 port，single port load 0.98 million pixels, whole unit
load 15.68 million pixels
HDMI2.0 LOOP
1
Can loop out HDMI2.0 input source
HDMI Monitor
1
Output monitoring
OPT1~OPT2
2
10G Optical Fiber Interface
Control Port
Ethernet
Communication Port
Two-way RJ45 control port, used to connect to the host
computer or multi-machine cascade communication
Square USB Port
Used to connect to the host computer
RS232 Port
For central control
Machine Specification
Input Voltage
100-240V AC~50/60Hz 0.6A
Operating
Temperature
0-45℃
Dimensions
482.6×421.3×88 mm (L × W × H)
Net Weight
7.6KG
Power
Consumption
80W

14
Use Menu
Using the product menu system can easily and intuitively set the machine
to meet the user's use requirements
The all-in-one video controller uses a full-color LCD display to display the
entire user menu. When the user does not operate or the operation times out,
the default state will be displayed on the LCD screen. If you use the buttons on
the front panel of the machine to set the machine, the LCD screen will display
the corresponding menu according to the user's operation to prompt the user
to operate better, faster and more intuitively.
The following will combine the button functions and the display of the
LCD screen to introduce the menu system of the all-in-one video controller in
detail.
How to use the buttons
The front panel button of controller divide to 3 areas, MENU、LAYER、
INPUT
MENU Area：
This area contains 1 buttons and a knob that can be pressed; button
and a knob.
Short press the "knob", its function is the same as the confirmation
button(OK) ; when press the return button( ) , the menu system will return
to the previous menu in turn, until it returns to the default state.
In the main menu, the enter button can also used for switch between
browsing mode and setting mode, for example:

15
Browsing Mode
Setting Mode
↖ confirm button, short press knob, can switch between the two modes. ↗
Under browse mode, Anticlockwise rotate the "knob", the cursor moves
up or left; rotate the "knob" clockwise, the cursor moves down or right. When
moving the cursor to the item to be adjusted, press the "knob" or the confirm
button to enter the setting mode, then turn the "knob" anticlockwise to
decrease the current parameter value; turn the "knob" clockwise, Then the
current parameter value can be increased. To continue setting other items on
this page, please switch back to browse mode. If you want to return to the
previous menu, please use the return button; if the adjustment is completed,
press the return button to return to the previous menu until the default state.
LAYER Area：
This area contains 4 buttons; LAYER1, LAYER2, LAYER3, LAYER4 ；
Corresponding to the 4 active screens inside the machine. Long press
the button to Function on or off the corresponding screen. The one that has
been used is white, and the current selection is red.
Short press to select the layer.
INPUT Area：
This area contains 8 buttons：DVI1、DVI2、HDMI1、DP1、5 to 7 are extended
input buttons
The way of selecting a signal is to first select the LAYER in LAYER area,
then select the corresponding signal.
When there is a signal in the input, the button light is white; the currently
selected one is red.

16
Introduction to Default State
After turning on the power of the all-in-one video controller, during the
system boot process, the boot interface will be displayed on the LCD screen of
the front panel. After the startup is completed, the default state of the current
machine will be displayed on the screen, as shown in the figure below：
LED-F816-3D:
The information in the above figure is explained as follows：
Symbol
Description
Resolution
Current output resolution
Current screen brightness
IP
Machine IP address
The serial number of the network port. If the current network port is
connected to the network cable, the network port will become
highlighted.
OPT1~OPT2
10g optical port, if connected with optical fiber cable, it is
highlighted here
Input
All input signal sources and input resolution can be clearly seen
button lock status
16:27:34
Machine current time

17
Main Menu Introduction
In the main menu, the user uses the “ ”buttons , and the knob to select
and adjust each item. The operation mode is as follows：
Description of the numeric buttonpad: For any parameter that needs to
be modified, in addition to pressing the knob and rotating it, and touching the
left and right direction buttons, you can also touch and click the
corresponding parameter to pop up the numeric buttonpad on the screen for
operation. Where 0 to 9 represent numbers Represents a decimal point,
represents exiting the numeric buttonpad mode, represents confirming
the parameter modification, and represents backspacing to delete the
entered number. The numeric buttonpad is shown in the following figure.
Operate
Introduction
Open Main Menu
In the default state, press the rotary knob or slide the "magnimage" in
the upper left corner
Select each Item
Rotate the knob to select each item
Adjust Parameter
parameter When the right item is a number or option parameter,
rotate the knob
Enter Next Level
Menu
When the project has a highlighted box, press the knob or click on the
screen
Operate Function
Use knob to select the item to be operated,and press the knob or click
on the screen
Return To Previous
Menu
press“ ”button
Confirm
Operation
When resetting and other operations, in order to avoid wrong
operation,You need to press the knob or click on the screen to confirm
the operation

18
Main Menu
In the default state, press the rotary knob or swipe the "MAGNIMAGE"
button in the upper left corner, and the menu system will enter the main menu
state.and the LCD screen will display as shown in the figure below:
There are 8 menu items in the main menu. Use the knob to select the 8
menu titles listed above. After selecting, press the knob to enter the selected
item, and press the " " button to return to the previous menu
LED SCREEN CFG

19
Connection Sequence:Manual

20
Udisk Operation：
Manual Files By Local Flash：