Magnus M mini Series User manual

Mini/Tabletop Tripod Components
Precautions
Thank you
for choosing
Magnus.
• Ensure that all knobs, handles, and legs are secured
properly before mounting your camera on this
tripod.
• Never transport, carry, or store this tripod while your
camera is attached.
• Do not use solvents, grease, or oil on any of the
tripod components. Use only a mild soap solution
to clean, and wipe dry with a lint-free cloth.
• Do not exceed the maximum load capacity.
• All images are for illustrative purposes only.
www.magnustripods.com
ONE-YEAR LIMITED WARRANTY
This Magnus product is warranted to the original purchaser
to be free from defects in materials and workmanship under
normal consumer use for a period of one (1) year from the
original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with
respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in
its intended environment. Inoperability of the product or part(s)
shall be determined by the warranty provider. If the product
has been discontinued, the warranty provider reserves the right
to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty provides you with specific legal rights, and you
may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Magnus Customer
Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Magnus
along with the RMA number and proof of purchase. Shipment of
the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.magnustripods.com or call Customer Service at
212-594-2353.
GG1
Owner’s
Manual
MTT-100
Mini/Tabletop Tripod
mini
series
Product warranty provided by the Gradus Group. www.gradusgroup.com
MAGNUS is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
Index pin
1/4-20 mounting screw
Spring loaded
clamp
1/4-20
mounting socket
1/4-20
stud for GoPro
1/4-20
mounting socket
Tilt lock
Locking Ring
Bubble level Platform
locking knob
Quick-release
latch
Pan handle/
tilt lock
Pan locking knob
Center column
Center column
locking knob
Leg braces
Flip locks
Leg extensions

Tilting the Camera
Panning the Camera
General
Legs
Center Column
Changing the Camera Orientation
Extending and Collapsing the Legs
Attaching a Camera
Adjusting the Center Column
Specifications
Operating the MTT-100
1Less tension lets you rapidly change the camera
tilt.
2Greater tension lets you control the camera for a
precise, slow camera tilt.
1The plate can be angled anywhere between 0°
to 90°. This lets you instantly change the camera
from landscape to portrait orientation.
1Increase tension for slow panning motion.
2Decrease tension for more rapid pan to follow
action like passing cars or people.
Use the pan feature to swivel the camera a full 360°.
Head Type: Pan and tilt head
Camera Mounting Screw: 1/4-20 male
Maximum Height: 24.7 in. (62.7 cm)
Minimum Height: 11.5 in. (29.2 cm)
Folded Length: 12 in. (30.5 cm)
Maximum Load: 4.4 lb. (2 kg)
Bubble Level: Yes
Materials: Aluminum, plastic
Weight: 14.7 oz. (0.4 kg)
Leg Lock Type: Flip lock
Independent Leg Spread: No
Leg Sections: 3
Center Column Sections: 1
Center Column Extension Type: Rapid