Maipu MP3900X Series User manual

MP3900X Series Router
Installation Manual
V1. 1

Copyright Statement
Copyright©2020 Maipu Communication Technologies Co., Ltd. All rights reserved.
Without the written approval of the Company, no company or individual is allowed to
extract, reproduce, translate or propagate this Manual, in whole or in part, in whatsoever
manner.
and are the trademarks of Maipu Communication Technologies Co.,
Ltd. All other trademarks, product marks and trade names referenced herein are owned
by their owners respectively.
This Manual may be subject to changes on account of product upgrade or other causes.
Maipu reserves the right to revise this Manual without any notice. Subject to the laws and
regulations, Maipu Communication Technologies Co., Ltd. shall, under no circumstance,
be responsible for any accident, negligence, breach of contract, defamation and
infringement of copyright or intellectual property right incurred by using the related
content of this Product Manual or this website, assume any liabilities for damage with
respect to any special, incidental, indirect or secondary losses and any losses on profit,
data, business reputation or expected economy so caused or bear any legal liabilities so
arisen.
Safety Statement
Important! Please read the product safety and compatibility information before energizing
and enabling the product.
Environmental Statement
This product complies with the design requirements in terms of environmental protection
and shall be stored, used and disposed in accordance with the related national laws and
regulations.

Preface
MP3900X Series Router Installation Manual
ii
copyright©2020 Maipu, all rights reserved
Preface
Manual Introduction
This manual introduces the appearance, hardware, and installation preparation and
method of the MP3900X series router, as well as its basic use and daily maintenance
in terms of energization & operation, troubleshooting and equipment maintenance.
Product Version
This manual is applicable to the product versions as below.
Product name
Product Version
MP3900X series router
MP3900X-08(V1)
Target Users
The major target users of this Manual are:
⚫Hardware Installation Engineer
⚫Debugging Engineer
⚫Site Maintenance Engineer
⚫System Maintenance Engineer
Convention
Convention of screen output formats
Format
Description
Screen print
Screen output
Keywords of Screen print
Key information of screen output (red part)

MP3900X Series Router Installation Manual
Preface
copyright©2020 Maipu, all rights reserved
iii
Convention of icons and signs
Format
Description
Note:
Supplement to or emphasis on the aforesaid.
Caution:
Matters that need attention while installing or operating the
equipment, which are important for proper installation and
operation.
Warning:
Operations prohibited or required to follow the specified steps;
otherwise, personal injuries or equipment damages are possible.
Convention of command formats
Format
Description
Bold
Keywords of command line
Italic
Parameters of command line
Brace “{ }”
Options in the brace are compulsory.
Bracket “[ ]”
Options in the bracket are optional.
Angle bracket “<>”
Information in the angle bracket is not displayed.
Square bracket “【】”
Contents in the square bracket need attention.
Upright slash “|”
A sign to separate the options, with the same meaning as “or”.
Slash “/”
A sign to separate the options, indicating a multi-choice
operation.
For the purpose of this manual, the icons have the definitions as below:
Icons
Description
This icon and its related description generally refer to the
switch.
Product Details
The manual matching with the product is as follows:

Preface
MP3900X Series Router Installation Manual
iv
copyright©2020 Maipu, all rights reserved
Manual
Description
MP3900X Series Router
Configuration Manual
Detailed introduction to the methods and steps of
configuring the equipment software functions, with the
typical cases made available for reference.
Technical Support
⚫Technical support hotline: [phone] & 400-886-8669
⚫Email (feedback): [e-mail]
Revision History
The Revision History is the summary of all manual updates. The latest version includes
all previous updates.
Version
Revision date
Description
V1.0
2017-10-10
First issue
V1.1
2018-1-24
Add the contents of RM3E-SPU03, RM3E-SPU10

MP3900X Series Router Installation Manual
Preface
copyright©2020 Maipu, all rights reserved
v
Contents
PREFACE·················································································································II
1ROUTER INTRODUCTION··················································································· 1-1
1.1 MP3900X-08APPEARANCE AND HARDWARE 1-1
1.2 INTRODUCTION TO SPU CARD 1-2
1.3 INTRODUCTION TO MIFC CARD 1-3
1.4 INTRODUCTION TO RM3E INTERFACE SUB CARD 1-3
1.5 INTRODUCTION TO RM2B SERIES CARD 1-4
1.6 INTRODUCTION TO POWER MODULE 1-5
1.6.1 AC POWER MODULE 1-5
1.7 AIR PASSAGE OF MP3900X SERIES ROUTER 1-6
1.7.1 FAN-2B-01 FAN MODULE 1-6
2INSTALLATION PREPARATIONS ·········································································· 2-1
2.1 CHECK ROUTER RUNNING ENVIRONMENT 2-1
2.2 SAFETY PRECAUTIONS 2-1
2.2.1 GENERAL SAFETY 2-1
2.2.2 ELECTRICAL SAFETY 2-2
2.2.3 STATIC SAFETY 2-2
2.2.4 LASER SAFETY 2-3
2.3 INSTALLATION TOOLS,INSTRUMENTS,AND EQUIPMENT 2-3
2.4 OPEN-PACKAGE AND INSPECTION 2-4
3ROUTER INSTALLATION ···················································································· 3-5
3.1 INSTALL ROUTER 3-5
3.1.1 INSTALL ROUTER TO WORKBENCH 3-5
3.1.2 INSTALL ROUTER TO CABINET 3-5
3.2 GROUND THE ROUTER 3-10
3.3 INSTALL INTERFACE SUB CARD COMPONENTS (OPTIONAL) 3-12
3.3.1 INSTALL USIM CARD 3-12
3.3.2 INSTALL 4GANTENNA 3-14
3.4 (OPTIONAL)INSTALL SPD 3-16

Preface
MP3900X Series Router Installation Manual
vi
copyright©2020 Maipu, all rights reserved
3.4.1 INSTALL AC POWER SPD 3-16
3.4.2 (OPTIONAL)INSTALL PORT LIGHTNING PROTECTOR 3-17
3.5 INSTALL POWER SUPPLY 3-18
3.5.1 INSTALLATION PREPARATIONS 3-18
3.5.2 INSTALL POWER MODULE 3-18
3.6 CONNECT POWER CABLE 3-19
3.6.1 INSTALLATION PREPARATIONS 3-19
3.6.2 CONNECT AC POWER CABLE 3-19
3.7 CHECK AFTER INSTALLATION 3-20
4POWER ON AND RUN ROUTER············································································ 4-1
4.1 LOG INTO ROUTER 4-1
4.1.1 CONNECT CONSOLE CABLE 4-1
4.1.2 SET PC HYPERTERMINAL PARAMETERS 4-2
4.1.3 POWER ON AND START 4-6
4.1.4 CHECK AFTER POWER ON 4-8
4.2 ACCESS NETWORK 4-8
4.2.1 ACCESS NETWORK VIA ETHERNET TWISTED PAIR 4-8
4.2.2 ACCESS NETWORK VIA FIBER 4-9
4.3 HARDWARE MANAGEMENT 4-12
4.3.1 VIEW SOFTWARE AND HARDWARE VERSION INFORMATION OF ROUTER 4-13
4.3.2 VIEW POWER MODULE STATUS INFORMATION 4-14
4.3.3 VIEW SYSTEM ENVIRONMENT TEMPERATURE INFORMATION 4-15
4.3.4 VIEW FAN STATUS INFORMATION 4-15
4.3.5 VIEW SWAPPABLE OPTICAL MODULE INFORMATION 4-16
5TROUBLESHOOTING ························································································· 5-1
5.1 TROUBLESHOOTING OF CONFIGURATION SYSTEM 5-1
5.1.1 TROUBLESHOOTING ABOUT NO DISPLAY ON TERMINAL 5-1
5.1.2 TROUBLESHOOTING ABOUT MESSY CODE ON TERMINAL 5-1
5.2 TROUBLESHOOTING ABOUT FAN 5-2
5.3 TROUBLESHOOTING ABOUT POWER 5-2

MP3900X Series Router Installation Manual
Preface
copyright©2020 Maipu, all rights reserved
vii
5.4 GET TECHNICAL SUPPORT 5-3
6ROUTER MAINTENANCE···················································································· 6-1
6.1 CHANGE MODULE 6-1
6.1.1 CHANGE POWER MODULE 6-1
6.1.2 SPU CARD 6-2
6.1.3 CHANGE RM2B/RM3E INTERFACE CARD 6-4
6.1.4 CHANGE FAN MODULE 6-6
6.2 CHANGE SWAPPABLE OPTICAL MODULE 6-7
6.3 DE-DUST THE ROUTER 6-9
6.3.1 DE-DUST THE FAN MODULE 6-9
6.3.2 DE-DUST THE BOARD CARD6-10
6.3.3 DE-DUST OPTICAL INTERFACE AND PIGTAIL CONNECTOR 6-11
APPENDIX·············································································································A-1

MP3900X Series Router Installation Manual
Router Introduction
copyright©2020 Maipu, all rights reserved
1-1
1Router Introduction
1.1 MP3900X-08 Appearance and Hardware
MP3900X series router only has one product model: MP3900X-08.
⚫MP3900X-08 router has three kinds of slots: SPU, RM3E, and RM2B. The
three slots are respectively inserted with RM3E-SPU card, RM3E-24GETS
sub card, and RM2B interface card.
⚫SPU: Server Processing Unit business processing card, responsible for
packet forwarding and control processing. Refer to "Appendix A2
Specifications of SPU interface card " for specific specifications
⚫RM2B interface card: including RM2B-4GET, RM2B-4GEF, RM2B-SM1 and
other interface cards. Refer to "Appendix A7 Specifications of RM2B
interface card " for specific specifications.
⚫RM3E interface card: include RM3E-24GETS interface card.
The dimension of MP3900X-08 is 442mm ×365mm ×88.6mm (W x D x H). The
front appearance diagram of MP3900X-08 is shown in Figure 1-1, and the rear
appearance diagram is shown Figure 1-2.
Figure 1-1 MP3900X-08 front appearance
1.Cabinet bracket
2.RM3E interface card slot

Router Introduction
MP3900X Series Router Installation Manual
1-2
copyright©2020 Maipu, all rights reserved
3.RM2B interface card slot
4.MIFC card slot
5. Static wrist socket
6.Chassis air vent
Figure 1-2 MP3900X-08 rear appearance
1. Fan slot
2. Power slot
3.SPU card slot
4. Grounding stud
1.2 Introduction to SPU Card
SPU card is the core of MP3900X router, which is responsible for packet
forwarding and control processing. MP3900X-08 must be configured with only
one SPU card. MP3900X-08 supports three types of SPU cards, RM3E-SPU03,
RM3E-SPU05, and RM3E-SPU10.
The appearance of RM3E-SPU05 card is as follows:
Figure 1-3 RM3E-SPU05 appearance
1. Screw
2.Puller
3. Port status indicator
4.Function port
5. Card status indicator
6.Card component area

MP3900X Series Router Installation Manual
Router Introduction
copyright©2020 Maipu, all rights reserved
1-3
⚫The SPU card of MP3900X router supports hot-swap.
1.3 Introduction to MIFC Card
MIFC card is the management interface card of MP3900X router. The serial port,
U disk interface, DC0 port and system status indicator of the device are all on
the card.
Warning
⚫The MIFC card of MP3900X-08 router prohibits hot-swap operation.
⚫The MIFC card of MP3900X-08 router can only be inserted to slot 9.
The appearance of the MIFC card is as follows:
Figure 1-4 MIFC appearance
1.Micro USB port
2.CONSOLE port
3.DC0 port
4.USB port
5. Card status indicator
6. Reset function button
7. Screw
8. Circuit board component area
1.4 Introduction to RM3E Interface Sub Card
The RM3E sub card slot of MP3900X router supports inserting RM3E-24GETS

Router Introduction
MP3900X Series Router Installation Manual
1-4
copyright©2020 Maipu, all rights reserved
interface sub card. The 24GETS interface card supports 24 10/100/1000M
Ethernet ports, and its main function is to complete data forwarding.
Figure 1-5 The appearance of RM3E series card
1. Circuit board component area
2.Scew
3. Service port
4.Port indicator
5.Hot-swap indicator
6.Hot-swap button
⚫The RM3E-24GETS card of MP3900X router supports hot-swap.
1.5 Introduction to RM2B Series Card
The MP3900X router supports six RM2B card slots. Each card slot supports
inserting 1GE, 4GET, 1E1, 4CE1 and other forms of sub cards, which are mainly
used as expansion functions.
Figure 1-6 The appearance of RM2B series card
1. Circuit board component area
2.Screw
3. Service port
4.Port indicator

MP3900X Series Router Installation Manual
Router Introduction
copyright©2020 Maipu, all rights reserved
1-5
1.6 Introduction to Power Module
MP3900X-08 only supports the AC power module. MP3900X-08 supports 1+1
redundant backup of twoAC powers.
The power module of MP3900X router has the following specification:
Specification
Description
Applicable Product Model
AD250-1S005E-B
AC power module
MP3900X-08
⚫The MP3900X-08 router provides two power module slots to realize 1 + 1
redundant backup of the power module, and the power module can also
realize load balancing.
⚫The power module of MP3900X router supports hot-swap.
1.6.1 AC Power Module
The appearance ofAC power module:
Figure 1-7 Power module
1. Indicator
2.Power module lock shrapnel
3.Fan outlet
4.Handle
5.Power switch
6.AC power socket

Router Introduction
MP3900X Series Router Installation Manual
1-6
copyright©2020 Maipu, all rights reserved
7.Installation hole of cable
anti-stripping strap
1.7 Air Passage of MP3900X Series Router
The air flow direction of MP3900X series router chassis is left in and right out,
and the diagram is as follows:
Figure 1-8 Air flow direction of MP3900X series router chassis
⚫Keep the air passage of MP3900X router unblocked during the operation.
1.7.1 FAN-2B-01 Fan Module
FAN-2B-01 fan module is a required module of MP3900X-08, which supports
hot-swap. Each MP3900X-08 has one fan slot, which should be installed with
one fan module FAN-2B-01 to ensure the normal operation of the system. The
schematic of the fan module is as follows.
Figure 1-9 FAN-2B-01 module

MP3900X Series Router Installation Manual
Router Introduction
copyright©2020 Maipu, all rights reserved
1-7
1. Handle
2. Fan indicator
3.Installation screw of fan card
4.Fan blade
5.Circuit board component area

MP3900X Series Router Installation Manual
Installation Preparations
copyright©2020 Maipu, all rights reserved
2-1
2Installation Preparations
⚫When the router is delivered, there is the packing list. Please confirm whether the
accessories are complete and good according to the items in the packing list. If
there is damaged or loss, please contact Maipu technical staff to replace.
2.1 Check Router Running Environment
MP3900X series routers must be used indoors. To ensure the normal running of the
router, take the corresponding measures to meet the environment requirement of the
router running:
⚫Air conditioning and ventilation system can ensure the normal running temperature
and humidity conditions of the router. For details, refer to Appendix C1
Environment Requirement.
⚫The good grounding is the basis of the router running and the important guarantee
conditions of preventing lightning and resisting interference. Ensure that grounding
meets the grounding specifications. For details, refer to Appendix D1 Router
Grounding Specifications.
⚫Ensure that the cleanness of the equipment room meets the requirement. Do not
place the router in the environment with lots of dust, such as in the being
renovated passage.
2.2 Safety Precautions
2.2.1 General Safety

Installation Preparations
MP3900X Series Router Installation Manual
2-2
copyright©2020 Maipu, all rights reserved
⚫Keep the router clean and dust-free; do not place the router in the damp place.
2.2.2 Electrical Safety
⚫Please check whether there are potential dangers. For example, the power is not
grounded, power supply grounding is not reliable, and the ground is wet.
⚫Before moving the router, be sure to remove all external cables (including power
cable).
⚫When maintaining with power, it is recommended that there are two or more
persons in the field.
⚫When closing the power, check and ensure that the power is turned off.
2.2.3 Static Safety
To avoid the static from damaging the electronic parts of the router, we need to take the
anti-static measures.
⚫When installing the components of the router, especially installing the components
with the circuit board (such as board), we should wear anti-static wrists.
⚫When holding the circuit board, please hold the edge of the circuit board and do not
touch the components or printed circuit.
⚫For the security, please check the resistance of the anti-static wrists. The resistance
between the body and the ground should be 1-10 megohms.
The using steps of the anti-static wrists are as follows:
Step 1:
Put the hand into the anti-static wrist.
Step 2:
Tighten the fastener and ensure that the piece metal on the anti-static wrist is well
contacted with the skin.
Step 3:
Insert the anti-static wrist into the anti-static wrist jack on the router chassis or clip the