Makers Making Change Swivel Wheelchair Cup Holder User manual

V1.0 | July 2021
Swivel Wheelchair Cup Holder
ASSEMBLY GUIDE
© 2021 by Makers Making Change.
Assembly Guide is licensed under the CC BY-SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Design by Connor McGough and is licensed under the CC BY-NC-SA 4.0 license: https://creativecommons.org/licenses/by-nc-sa/4.0
Files available at https://www.makersmakingchange.com/project/swivel-wheelchair-cup-holder/ Page 1of 3
Required Components
BOM
1. Cup Holder
2. Swivel Arm
3. Mount Base
4. Mount Top
5. Mount Plug
6. Hook and Loop Strap
Required Tools
•Scissors / Hobby knife for trimming strap to length
Required Personal Protective Equipment (PPE)
•N/A
Cup Holder
Swivel Arm
Holder
Mount Top
Mount Plug
Mount Base

V1.0 | July 2021
Swivel Wheelchair Cup Holder
ASSEMBLY GUIDE
© 2021 by Makers Making Change.
Assembly Guide is licensed under the CC BY-SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Design by Connor McGough and is licensed under the CC BY-NC-SA 4.0 license: https://creativecommons.org/licenses/by-nc-sa/4.0
Files available at https://www.makersmakingchange.com/project/swivel-wheelchair-cup-holder/ Page 2of 3
Assembly Instructions
Step 1
Insert Cup Holder into Swivel Arm.
Step 2
Insert Mount Base post into the Swivel Arm.

V1.0 | July 2021
Swivel Wheelchair Cup Holder
ASSEMBLY GUIDE
© 2021 by Makers Making Change.
Assembly Guide is licensed under the CC BY-SA 4.0 License: http://creativecommons.org/licenses/by-sa/4.0
Design by Connor McGough and is licensed under the CC BY-NC-SA 4.0 license: https://creativecommons.org/licenses/by-nc-sa/4.0
Files available at https://www.makersmakingchange.com/project/swivel-wheelchair-cup-holder/ Page 3of 3
Step 3
Insert Mount Top onto Mount Base by aligning tabs with holes. Rotate the Mount Top one
quarter turn to fix into place.
Step 4
Insert Mount Plug into the Mount Top to fix the Mount Base into place.