Malatech AMMOLITE User manual

SOLAR SECURITY SMART CAMERA
AMMOLITE / IOLITE
USER MANUAL
MANUFACTURER/IMPORTER:
MALATECH WATER, LTD.
1/E Vanyi way, Alsonemedi,
2351 Hungary
[phone]
[e-mail]

Solar panel: 3 W Monocrystalline Silicone solar panel
with 3 m cable
Li-battery: Panasonic 10 Ah Lithium battery
Charging methods: By solar energy or USB cable
Charging time:
Discharged battery can be charged in 18
hours by solar panel, and in 12-15 hours by
USB cable (assuming the camera is not in
use during charging)
Discharging time with 1 full-charge:
Up to 100 days (depending on use), all-year
with ecient solar re-charging (depending
on use)
Battery stand-by time: 6 months
Expected battery lifetime: > 500 cycles
Image sensor: 1/3*2 MP CMOS sensor
Chip set: Hi3518EV300
Lens: 3.2 mm at F1.6
Visual angle: 120 degrees
IR compensation: up to 30 m
Microphone: Built-in 38 dB microphone with 5 m eective
distance
Speaker: Built-in speaker (2 W, 8 Ω)
On-board storage:
External up to 128 GB micro SD card
supported (SD card is not the part of the
package)
Cloud storage: Available (paid service)
Connection mode: Wi-Fi (802.1 b/g/n at 2.4 GHz)
Transmission distance: Outdoor: 100 m, Indoor: 50 m (depending
on environment & obstacles)
Antenna: 5 dbi
Motion detection method: Human body infrared induction
PIR sensing distance: Up to 8 m
Time delay: 5 seconds
Power consumption:
At standby mode: 200 uAh, daytime
operation: 130 mAh, night operation:
400 mAh
Monitoring options: By pressing the button on the device / by
motion detection / by Remote Live View
Application for smart phones &
tablets: TUYA Smart for iOS and Android systems
Smart home support: Google Home, Amazon Alexa (paid services)
Waterproof IP rating: IP66
Warranty period: 1 year
Product weight: 900 g
Product size: 212X90X70mm
Product box length: 217 mm
Product box width: 135 mm
Product box height: 127 mm
Solar panel: 2 W Monocrystalline Silicone
solar panel
Li-battery: Panasonic NCR 18650B 3.4 Ah*2 pcs (Li-ion)
Charging methods: By solar energy or USB cable
Charging time:
Discharged battery can be charged in 20
hours by solar panel, and in 12-15 hours by
USB cable (assuming the camera is not in use
during charging)
Discharging time with 1 full-
charge:
Up to 90 days (depending on use), all-year
with ecient solar re-charging (depending
on use)
Battery stand-by time: 6 months
Expected battery lifetime: > 500 cycles
Image sensor: 1/3*2 MP CMOS sensor
Chip set: HI3518EV300
Lens: 3.2 mm at F1.6
Visual angle: 120 degrees
IR compensation: up to 30 m
Microphone: Built-in 38 dB microphone with 5 m eective
distance
Speaker: Built-in speaker (2 W, 8 Ω)
On-board storage:
External up to 128 GB micro SD card
supported (SD card is not the part of the
package)
Cloud storage: Available (paid service)
Connection mode: Wi-Fi (802.1 b/g/n at 2.4 GHz)
Transmission distance: Outdoor: 100 m, Indoor: 50 m (depending on
environment & obstacles)
Antenna: 5 dbi
Motion detection method: Human body infrared induction
PIR sensing distance: Up to 8m
Time delay: 5 seconds
Power consumption:
At standby mode: 200 uAh, daytime
operation: 130 mAh, night operation: 400
mAh
Monitoring options: By pressing the button on the device / by
motion detection / by Remote Live View
Application for smart phones
& tablets: TUYA Smart for iOS and Android systems
Smart home support: Google Home, Amazon Alexa (paid services)
Waterproof IP rating: IP65
Warranty period: 1 year
Product weight: 800 g
Product size: 210X135X67 mm
Product box length: 220 mm
Product box width: 154 mm
Product box height: 113 mm
AMMOLITE
2

Solar panel: 2 W Monocrystalline Silicone
solar panel
Li-battery: Panasonic NCR 18650B 3.4 Ah*2 pcs (Li-ion)
Charging methods: By solar energy or USB cable
Charging time:
Discharged battery can be charged in 20
hours by solar panel, and in 12-15 hours by
USB cable (assuming the camera is not in use
during charging)
Discharging time with 1 full-
charge:
Up to 90 days (depending on use), all-year
with ecient solar re-charging (depending
on use)
Battery stand-by time: 6 months
Expected battery lifetime: > 500 cycles
Image sensor: 1/3*2 MP CMOS sensor
Chip set: HI3518EV300
Lens: 3.2 mm at F1.6
Visual angle: 120 degrees
IR compensation: up to 30 m
Microphone: Built-in 38 dB microphone with 5 m eective
distance
Speaker: Built-in speaker (2 W, 8 Ω)
On-board storage:
External up to 128 GB micro SD card
supported (SD card is not the part of the
package)
Cloud storage: Available (paid service)
Connection mode: Wi-Fi (802.1 b/g/n at 2.4 GHz)
Transmission distance: Outdoor: 100 m, Indoor: 50 m (depending on
environment & obstacles)
Antenna: 5 dbi
Motion detection method: Human body infrared induction
PIR sensing distance: Up to 8m
Time delay: 5 seconds
Power consumption:
At standby mode: 200 uAh, daytime
operation: 130 mAh, night operation: 400
mAh
Monitoring options: By pressing the button on the device / by
motion detection / by Remote Live View
Application for smart phones
& tablets: TUYA Smart for iOS and Android systems
Smart home support: Google Home, Amazon Alexa (paid services)
Waterproof IP rating: IP65
Warranty period: 1 year
Product weight: 800 g
Product size: 210X135X67 mm
Product box length: 220 mm
Product box width: 154 mm
Product box height: 113 mm
IOLITE
3

CAMERA STRUCTURE, CONTENT OF THE BOX
ATTENTION! IF YOU INTEND TO CHANGE YOUR SMARTPHONE OR
TABLET, PLEASE DO NOT FORGET TO REMOVE YOUR CAMERA(S) FROM
THE APPLICATION ON YOUR OLD DEVICE/ PLEASE READ THIS MANUAL
CAREFULLY, YOU FIND DETAILED DESCRIPTION ABOUT HOW TO REMOVE
YOUR DEVICES FROM THE APP BELOW!
ATTENTION! The life span of the battery depends on you as well! Please
use the camera correctly as described in this manual. If you intend to use
the solar panel eciently for recharging the battery, install the camera
in a sunny place where sucient sunlight is provided for charging the
battery every day. Adjust the solar panel’s vertical angle correctly (ideal
is app. 45 degrees), horizontally it should face towards the midday sun.
Please pay attention to place your camera in a non-shaded place with
sucient sunshine provided for the solar panel operating eciently.
If you prefer to charge the camera battery by grid power with the USB
cable, please care about charging your camera when the battery level
runs low.
If you intend to turn o your camera, and you do not want to use it for a
while, please make sure that the battery has sucient charge, and it is
not totally discharged. If you would like to store the camera instead of
using it, please turn o the camera with the ON/OFF button. In case of
a longer storage, please turn on the camera once every month, and full-
charge the battery. It may decrease the life span of the battery if the
camera is stored for a longer period with a totally discharged battery,
moreover it can damage the battery!
4

CAMERA STRUCTURE, CONTENT OF THE BOX
Content of the box:
Iolite:
1. Iolite solar smart camera
2. Mounting template
3. Screwdriver
4. USB cable
5. Li-ion batteries (2 pcs)
6. Screws, anchors
Ammolite:
1. Ammolite solar smart camera
2. Solar panel
3. Screwdriver
4. USB cable
5. Li-ion battery (1 pc)
6. Screws, anchors
1 1
2 2
4 4
3 3
5 5
6 6
5

Solar panel
5 dbi antenna
Metal housing
Indicator lights (red: power, blue:
record, green: battery charging)
Vertical adjustment (120 deg)
Horizontal adjustment (355 deg)
Microphone
HD lens
PIR motion sensor
Night vision
Camera structure:
ATTENTION! Both Ammolite, and Iolite camera series are produced with
2 type of housing depending on market (HF-S4, HF-S5). Images below
show the structure of the Iolite cameras with the 2 housing types. In
case of Ammolite the dierence is that the solar panel is not integrated,
but supplied as a separate item, and can be connected to the camera by
a cable with a plug.
HF-S4 housing:
Reset button
Speaker
ON/OFF button
DC 5V port
Micro-SD card slot
BOTTOM OF
THE CAMERA
CAMERA STRUCTURE, CONTENT OF THE BOX
6

Solar panel
5 dbi antenna
Metal
housing
Indicator lights
(red: power,
blue: record,
green: battery charging)
Vertical adjustment (120 deg)
Horizontal adjustment (355 deg)
Microphone
HD lens
PIR motion sensor
Night vision
HF-S5 housing:
Reset button
Speaker
ON/OFF button
DC 5V port Micro-SD card slot
BOTT OM OF THE CAMERA
CAMERA STRUCTURE, CONTENT OF THE BOX
7

HF-S4 HF-S5
USER INSTRUCTIONS
First use - Start-up of the camera:
1. Remove the bottom cover of the camera by removing the screws with
the screwdriver.
2. Insert the Micro-SD card correctly in the slot (ATTENTION! The Micro-SD
card is not the part of the package! The camera supports Micro-SD cards
up to 128 GB storage space)
3. Press the ON/OFF button for 2-3 seconds.
4. Red indicator light shows that the operation has been executed
successfully.
12
4
3
8

HF-S5
HF-S4
USER INSTRUCTIONS
Battery charging:
ATTENTION! Full-charge the battery before rst use by grid power using
the supplied USB cable! Full-charge will require 10-18 hours! The green
indicator light shows that the battery is charging.
Restoring factory settings:
In case your camera does not connect to your smartphone or tablet, or
you would like to connect it to a new router, restoring the factory settings
can be a quick solution.
1. If you see the blue indicator light ashing, please turn OFF, and turn
ON the camera.
2. Right after, keep pressing the RESET button (for app. 5 seconds) until you
hear a sound which means that the factory settings have been restored.
Following a successful operation, the red indicator light shines again.
1
MUST DO
HF-S5
HF-S4
2
9

Downloading the application:
Search for Tuya Smart app in App Store or Google Play. Download it to your
device, and install the application on your device.
Pair your device:
Before downloading and installing the application please check whether
your smartphone or tablet is connected to your Wi-Fi system.
1. Open “Tuya Smart ” App Register and tap +
2. Tap Video Surveillance then Smart Camera
3. Tap on “next step”
4. Select your router, enter your password then tap “Conrm”
ATTENTION! Only 2.4 GHz is supported in case of routers!
1 2 3 4
USER INSTRUCTIONS
10

5. Place the screen of your smartphone or tablet at a 10-20 cm distance
right in front of the camera lens to let your camera recognize the code.
Do not move or shake the devices during the process.
6. The camera beeps when the pairing is done. Then tap “I Heard a
Prompt ”, and wait for nishing the pairing process.
If you do not hear a beep:
1. Please check whether you typed the password for your router correctly.
2. Is your router set for 2.4 GHz? E.g. at 5 GHz the camera cannot connect
to your device.
3. Is the camera correctly connected with its antenna?
4. If the above are checked, and set up correctly, please apply the work
steps written in chapter “Restoring factory settings” above, and try
again.
5 6
USER INSTRUCTIONS
11

Application Tutorial:
Home Page
1. HHome settings
2. Add channels (up to 4)
3. Voice Control
4. Add Device
5. All Devices
6. Room Management
7. Devices
8. Home page
9. Smart functions
10. Me
Preview page
1. Setting
2. Signal
3. Audio/ON/OFF
4. HD/SD Video
5. Full Screen
6. Battery Display & Charge Level
7. Screenshot
8. Two-Way Audio
9. Record to Your Smartphone
10. Playback
11. Cloud Storage
12. Photo Album
Beállítások
USER INSTRUCTIONS
12

Settings page
1. SSecurity camera: Name/Location/
Change location
2. Device Information
3. Tap-to-Run and Automation
4. Basic Function Settings: Flip screen
(horizontal, vertical, 180-degree
rotation), Time watermark ON/OFF
5. Detection Alarm Settings: Human Body
Filtering
6. PIR sensitivity settings (High
is recommended for outdoor
applications)
7. Power Management Settings
8. Storage Settings - Format SD-Card
9. Purchase VAS - Cloud storage service, paid service, 30 days free
10. Share Device - Share your device with up to 5 users
11. FAQ & Feedback
12. Firmware Information
13. Remove Device - If you replace your smartphone or tablet, always
do it!
Me page
1. HHome Management - Home name,
Room management: you can add room/
area or delete room/area, Home location,
Home member: you add accounts
2. Message Center - Alarm/Home/Bulletin
3. FAQ & Feedback
4. More Services - Ai Filtered Notication/
Cloud Storage/Phone Notication/
Message Notication Alexa/Google
home/IFTTT
5. Settings
USER INSTRUCTIONS
13

How to check motion detection?
1. KTap Me
2. Tap Message Center
3. Tap Device
How to set up the
DO-NOT-Disturb
Schedule?
1. Tap Me
2. Tap Settings
3. Tap App Notication
4. Tap Do-Not-Disturb
Schedule
How to adjust PIR Settings?
1. Tap Device
2. Tap Setting
3. Tap PIR
How to share your device with family members & other users?
1. Tap Device
2. Tap Setting
3. Tap Share Device
4. Tap Add sharing (All users
must have Tuya smart app
installed and registered on
their device)
USER INSTRUCTIONS
14

How to connect to smart speaker?
1. Tap Me
2. Tap More Services
3. Tap Alexa or other (Alexa and
Google Assistant both have video
and text tutorials for installation)
How to reduce false alarms?
1. Tap Setting
2. Tap Detection Alarm Settings
3. Activate Human body Filtering
Al Filtered
Notication
Get notications that you really care about exclude
false alarms
Video Cloud
Storage
paid service, 30 days free, camera will upload
encrypted video data to the cloud once you
subscribe for the service. You can check your
content through the App anytime, from anywhere
Phone
Notications Never miss an event by Phone Notications
SMS Notications Never miss an event by SMS Notications
USER INSTRUCTIONS
15

How to remove the device?
Solution 1: Tap Device then Setting then Remove Device
If you intend to change your smartphone or tablet, please do not forget to
remove the camera on your old phone or tablet like written above. If you
forgot to do it, please choose Solution 2.
Solution 2:
Tap Me/FAQ&Feedback/Report Issue. Fill the form, before you send
the form, make a screenshot on your phone or tablet. Right after that,
send the request by tapping Submit. Please send the screenshot to
[e-mail], and we will remove the device.
USER INSTRUCTIONS
16

FAQ, problems & solutions:
The device does not connect to Wi-Fi
1. Please make sure that the Wi-Fi is set to 2.4 GHz.
2. Make sure that the device is close to the Wi-Fi when you turn it on.
3. Make sure that you typed in your password correctly.
4. The user name and password for the Wi-Fi should not contain special
characters.
5. Check your device whether it is in Boot Network status.
My smartphone does not receive the alarms
Please check whether “Push Notications” is allowed on your phone, if not
enable it.
Supported data storage
1. Cloud storage (paid service)
2. On-board: Micro-SD card (10, 16, 32, 64, 128 GB supported). The SD card
is not the part of the package
Charging methods besides solar-charging
USB cable, 5V 1A
USER INSTRUCTIONS
17

Camera installation:
Please only install your camera at its nal location after you charged the
battery completely, and you paired the device with your smartphone or
tablet!
1. Use the mounting template to sign the locations of the holes on the
chosen surface.
2. Drill the holes.
3. Push the anchors in the holes.
4. Position the camera correctly, then x it by driving the screws in with
the screwdriver.
5. Set up the preferred angle like shown below.
1
2
USER INSTRUCTIONS
18

3
4
5
USER INSTRUCTIONS
19

1. After receiving your camera, please open the camera’s box gently with
paying attention not to cause harm to the camera and its parts.
2. Before starting to use your camera, please make sure that there are no
visible damages on the camera and its parts.
3. If you observe breaking, crack, fracture on the camera or on its parts,
please do not use the product, but contact us for replacement.
4. Please do not apply strong physical force on the product that can
damage the camera or its parts. Non-ordinary use of the product results
the loss of product warranty.
5. Please keep the box, the packaging material, and the content out of the
reach of children, and pets. There are small objects among the parts
of the camera, which children or pets can ingest, or can cause harm to
themselves with.
6. Please do not disassemble the camera, do not bend the camera, or
apply physical stress on the camera. Please follow the user manual’s
instructions for installation, and operation.
7. Do not expose the camera to higher heat than natural caused by
weather changes. Excessive heat may damage more constituents of the
camera.
8. Do not expose the camera to continuous high- or low-pressure water
ow, even if you intend to clean your camera. The IP65 protection does
not mean you can put the camera in water, or you can wash the camera
with continuous water stream. The next chapter declares the right
method of cleaning.
9. Please always contact Malatech Water, Ltd, or a professional appointed
by our company if you intend to disassemble the camera, remove any
of its parts, or service the camera. Service attempts made by users are
prohibited, and result the loss of product warranty.
USER INSTRUCTIONS, INFORMATION
20