INSTRUCTIONS
SMARTPHONE STAND
VLOGGERPRO
PACKAGE CONTENTS
•VloggerPro stand
TECHNICAL SPECIFICATIONS
•360° horizontal rotation
•37° upward tilt
•37° downward tilt
•Weight: 192 g
•Dimensions: 9.3 × 9.3 × 16.5 cm
•Power supply: 3 × AA battery
•Supported phone width: 56–100 mm
•Supported system: iOS 10.0 or above,
Android 8.1 or above
•Material: plastic
HOW TO USE
INSTALLING BATTERIES
1. Rotate the cover on the bottom of the device
slightly to the left to open it.
2. Insert 3 AA batteries and mind their polarity.
3. Put the cover back and turn it slightly to the
right to close it.
APP INSTALLATION
1. On your smartphone go to the page
http://www.jltech.org.cn/2code/download.
html to download the app. You can also scan
the QR code printed in the included User’s
manual to access the page directly.
2. Download and install the Dflow app.
USAGE
1. Loosen the knob on the back of the device to
rotate the phone clamp for horizontal or
vertical shooting mode. Tighten the knob to
secure it.
2. Gently open the clamp and slide the phone
between rubberized arms.
3. Tilt the phone upward or downward while
holding the base of the device to adjust the
required shooting angle.
4. Press the power button on the base of the
device to turn it on (the red light starts
flashing).
5. Turn on the Bluetooth connection on your
smartphone and open the Dflow app.
6. Click on the “photograph” icon and then on
the Bluetooth icon at the top of your screen.
After the connection is successful, the blue
light on the VloggerPro device starts
flashing.
7. The device is now ready to use.
8. The device automatically tracks your face or
an object and rotates depending on your
position.
9. Choose among “Photograph”, “Videotape”,
or “Live video” mode and discover various
features of the app.
10. To turn off the device, press the power
button for 3 seconds until the light stops
flashing.
WARNINGS
•Do not disassemble or modify in any way.
•Do not submerge underwater.
•Turn off and take out the batteries when not
in use.