Mania CoolCam User manual

Kid's Digital Camera CoolCam
COMPONENTS
Camera
USB Cable
Stickers
Bracelet
Neck Strap
TECHNICAL SPECIFICATIONS
• Image format: JPEG
• Video format: AVI
• Video Resolution:
1280 ×720/ 640 ×480/ 320 ×240
• HD 720p video
• Supports TF memory cards (up to 32 GB)
• Powered by 3x AAA batteries
•Display size: < 2"
Note: Please install 3x AAA batteries and a TF memory
card (up to 32 GB) to be able to use the camera.
INSTALLATION AND USE
1. Install the batteries
To install the batteries, slide down the cover on the right
side of the camera and insert 3 AAA batteries with the
correct polarity.
2. Insert the TF card in the slot on the bottom of
the camera. Make sure you insert it oriented
right.
Format the TF card at the first use. Press OK button
then press the Right button to enter the Setup
Menu. Select the format option by pressing the Up
and Down buttons, then press OK button twice to
select the Yes option. The memory card will be
formatted automatically. Note: All the data on the
card will be deleted.
3. Power ON/OFF
Press and hold the Power button and the
camera will turn on.
Press the Power button when the camera is on to
switch it off.
When the camera is inactive for more than 1 minute
it will switch off automatically. You can set the time
to 1, 3 or 5 minutes. To set the time of automatic
turning off press the OK button then press the Right
button to enter the Setup Mode. Select the Power
Save option and make the necessary adjustments.
4. Selecting the recording mode.
By default, the camera is set to the video recording
mode. To select the desired recording mode press
the left button.
By pressing the Left button you can select one of the
following modes:
Video (default mode) –recording video clips.
Camera mode –taking photos (still images)
Playback mode –playing videos or displaying
images.
INSTRUCTIONS FOR USE

5. Setting up the date and time, and other
settings
In the Video mode press the OK button then the
Right button to enter the Setup Menu. Press the Up
and Down buttons to navigate through Date and
Time options. Press OK button to change the Date
and Time. Use the Up and Down buttons to add or
to decrease the value and the Left and Right button
to navigate through the options and menu. Press OK
to confirm then press again OK to exit the setup
mode.
To change other settings please refer to the
instructions above. (in the step 5.)
RECORDING VIDEO
Open the LCD screen.
Turn on the device by holding the Power button for 3
seconds.
Press the Shutter button to start recording.
To stop recording press again the Shutter button.
(Camera stops recording automatically when the
memory card is full.)
Zoom In and Out during the recording by pressing
the Zoom In and the Zoom Out buttons.
CAMERA MODE
Press and hold the Power button to switch the
device on.
Press the Left button to enter in Camera mode.
Press the Shutter button to take a photo.
PLAYBACK MODE
Press and hold the Power button to switch the device on.
Press twice the Left button to select the Playback mode.
You can navigate through the gallery of photos or videos
by pressing the Up and Down buttons.
Play recorded video
Select the desired video file. Press the Shutter button to
start playing the video. Press again the Shutter button to
stop playing the video.
By pressing the Zoom In and Zoom Out buttons you can
magnify and zoom out, the image / video.
IMPORTANT
• Do not use this product near water or inflammable
substances, with wet hands or body or in contact with
water
• Clean the device with a dry cloth
• Do not use abrasive products for cleaning
• Do not immerse in liquid
• If you do not use the device for a long time, remove
the batteries
• Store in a dry, dust-free place
• Please comply with the Waste disposal and
Environmental Regulations
Warranty
The warranty is valid for 12 months and you can apply it to the seller
(us). You can contact us by clicking our logo at the bottom of this
document to submit a warranty claim via email. Send the order
number and the date of purchase.