Mania Ymiron User manual
COMPONENTS
Wireless headphones Ymiron
USB charging cable
TECHNICAL SPECIFICATIONS
•Frequency: 2.40 GHz - 2.48 GHz
•Bluetooth support, Bluetooth mono support
(Headset Profile –HSP v1.5, Hands-Free, Profile -
HFP), Bluetooth stereo supported, (Advanced
Audio Distribution Profile- A2DP v1.2; Audio
Video Remote Control Profile –AVRCP v1.0) and
HSF protocols
•Strength: ≤4 dBm
•Range: ≤10 m
•Frequency range 20 Hz - 20 kHz
•Built-in microphone
•Supports MicroSD / TF card
•Charging time: 2 to 2.5 hours
•Standby: up to 360 hours
•Operating temperature: -20 ° C to 55 ° C
•Rechargeable built-in lithium-ion battery, DC 3.7
V
CHARACTERISTICS
•A Bluetooth wireless connection to smart
devices, computers, and TVs that support
Bluetooth technology.
•Flexible design.
•Two-way communication.
•Supports standard MP3, WMA, WAV, etc.
CHARGING
Use the enclosed USB cable to charge the headphones on
devices with USB ports. Use only the original USB charging
cable to avoid any damage.
IMPORTANT: Before you use your headset for the first
time, charge the battery for 4 hours for optimum battery
capacity and lifetime. Never charge the battery
excessively! Stop charging when the red indicator light
goes out. Each charge is sufficient for up to 10 hours of
listening at medium power.
LED INDICATOR LIGHT
When charging, the indicator LED light will turn red. When
the headphones are charged, the LED indicator light will
turn off.
Before the connection, the LED indicator light will flash
blue and green.
When you make the connection, it flashes green.
USER MANUAL
WIRELESS HEADPHONES YMIRON
PAIRING WITH BLUETOOTH DEVICES
When connecting headphones to another device, make
sure both devices are close to each other. Turn on the
headset (ON / OFF button). On your smart device, enable
Bluetooth and find LPT660 among available devices.
Upon successful connection, your device will be notified
"Bluetooth device is connected successfully," and the LED
indicator light will flash green.
USE OF THE PRODUCT
While connected, you can play music from your smart
device. You can also use the volume keys on the
headphones to adjust the volume. Press the Answer Call
/Play / Stop key to pause or activate the playback of the
content, and you can answer or end a call as well.
By briefly pressing Vol + and Vol- , you are browsing
thought uploaded music files. With a long press of the
same keys, you increase or decrease the volume.
To listen to the FM frequencies, press and hold the M /
EQ key. In FM mode, press Play / Stop to automatically
scan the frequencies. By briefly pressing Vol + and Vol-,
you are manually selecting the FM frequencies.
To switch back to Bluetooth mode, press and hold the M
/ EQ key again. To listen to the content from the MicroSD
/ TF card, simply insert the card into the slot and select
the contents with the previously mentioned keys.
IMPORTANT
•Before you use your headset for the first time,
charge the battery for 4 hours for optimum
battery capacity and lifetime.
•Avoid overcharging - stop charging after the red
LED indicator light turns on.
•Turn off the headset for a longer battery life after
each use.
•If you have not used the headset for a longer
period, recharge it before using.
•Do not use this product near water or
inflammable substances, with wet hands or body
or in contact with water.
•Clean the device with a dry cloth.
•Do not use abrasive cleaners for cleaning.
•Do not immerse in liquid.
•Store in a dry and dust-free space.
•Please follow the environmental regulations
applicable to recycling.
