Mapei Mapeheat Thermo Touch User manual

1
MAPEHEAT
THERMO
TOUCH
Installation Guide

32
Table of content
Dimensions 3
Installation 4
Description 7
Using the Thermostat 7
Installer Menu 8
Warning 8 86.3
86.3
48.0
86.3
49.0
79.8 60.0
16.5
41.0
DIMENSIONS

54
SENSOR
NTC
Floor
Sensor
Heating cable
230 VAC
Max. 13A
Power supply
230 VAC
10KΩ
N
L
L N
PE
PE
PE
NTC
Floor
Sensor
Power supply
heating cables
L N L1
1
2
3
4
5
6
L2 L3 PE N
N N N
L L L
PE
A1
A2
K1
Power supply
230 VAC
K1:
10KΩ
SENSOR
SENSOR
NTC
Floor
Sensor
Heating cable
230 VAC
Max. 13A
Power supply
230 VAC
10KΩ
N
L
L N
PE
PE
PE
NTC
Floor
Sensor
Power supply
heating cables
L N L1
1
2
3
4
5
6
L2 L3 PE N
N N N
L L L
PE
A1
A2
K1
Power supply
230 VAC
K1:
10KΩ
SENSOR
AA
BB
1 x = MAX 13A
>1 x
Do not use contactor without suppression device.
1.5 m1.5 m
1122
IP21
ZONE
3344
5566
INSTALLATION

76
7788
Temperature
Sensor symbol
Heating symbol
Menu button
Left button
Right button
THERMO TOUCH button
Day
Clock button
Time
Event symbol
DESCRIPTION
The Mapeheat Thermo Touch Thermostat is a Programmable
Thermostat designed for Electrical Floor Heating. The Thermostat
has 2 programmes to choose from:
• Manual ON/OFF (Constant Single temperature)
• Timer programme (4 timer events/day)
USING THE THERMOSTAT
• Touch the „ “ button to set the clock and day of the week
• Touch the „ “ button for 3 seconds to program the timer
programme
• Touch the „ “ button for 5 seconds to enter the Installer Menu
• Touch the „ “ button to switch from Timer to Manual ON/OFF
mode
• Touch the „ “ button for 2 seconds to put the Thermostat into OFF
(standby) mode
1
2
3
4
5
6
7
8
9
10
11
1
2 3
4 5 6
7
8
9
10 11

98
INSTALLER MENU
# Description
1 Sensing mode selection
2 12 vs 24 hours display
3 Motion sensor. When getting close to the thermostat (5 cm
range) the display lights up automatically
4 Offset for floor sensor calibration
5 Room sensor calibration
6 Minimum temperature set point for the Floor Sensor
7 Maximum temperature set point for the Floor Sensor
8 Minimum temperature set point for the Room Sensor
9 Maximum temperature set point for the Room Sensor
10 Adjustable hysteresis
11 Window open function. If the thermostat feels a sudden
drop in temperature, the heating will be stopped for 30
minutes and the Home symbol will blink.
WARNING
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.

10
NOTES

12
0121 508 6970 | mapei.co.uk
MAPEI UK LTD
Mapei House
Steel Park Road
Halesowen
West Midlands. B62 8HD
0121 508 6970
[email protected].uk
MAPEI WORLD LONDON CITY
6 Great Sutton Street
Clerkenwell
London
EC1V 0BX
020 3302 9610
clerken[email protected].uk
SZ12300121 | C.P. MK6483530 (UK) 03/2022
TECHNOLOGY FROM